Based on Environment Agency monitoring data. Last updated 19 February 2026.
According to TapWater.uk's analysis, 15 PFAS compounds have been detected across 5 sampling points in Blackpool. The highest recorded level is 0.052 µg/L (PFOA).
Compounds detected
15
Sampling points
5
Highest level
0.052 µg/L
Latest date
19 February 2026
<0.01 µg/L
0.01–0.075 µg/L
>0.075 µg/L
PFAS levels over time
Monthly aggregate PFAS levels. Dashed line shows WHO guideline (0.1 µg/L).
Compounds detected
PFOA
0.0520 µg/L
PFPeA
0.0068 µg/L
PFHpA
0.0059 µg/L
PFHxA
0.0057 µg/L
PFBA
0.0051 µg/L
PFBS
0.0039 µg/L
PFHxS (linear)
0.0036 µg/L
PFOS (total)
0.0027 µg/L
6:2 FTSA
0.0026 µg/L
PFOS (branched)
0.0018 µg/L
PFHxS (branched)
0.0011 µg/L
6:2 FtSAB
0.0010 µg/L
PFOS (linear)
0.0009 µg/L
PFecHS
0.0008 µg/L
PFPeS
0.0006 µg/L
Dashed line = WHO guideline (0.1 µg/L). Bar shows maximum detected level.
Sampling points
Environment Agency monitoring locations near Blackpool.
LocationMax levelCompoundCoordinates
BLACKPOOL SOLARIUM RECREATION GROUND BH
0.052 µg/LPFOA53.7832, -3.0564
SSN0918 DRAIN @ WILDING HILL WOOD
0.001 µg/LPFOA53.8010, -2.9632
ROYAL LYTHAM ST ANNES GOLF CLUB WELL POINT SD32/15B
0.021 µg/LPFOA53.7460, -3.0053
DOW BROOK AT FRECKLETON
0.019 µg/LPFOA53.7582, -2.8522
LIGGARD BROOK @ B5259
0.021 µg/LPFOA53.7401, -2.9536
What this means for your tap water
Important context: the Environment Agency data shown here is from environmental monitoring of rivers and groundwater — not treated tap water. PFAS detected in source water does not necessarily mean the same levels are present in the water that comes out of your tap.
Water treatment processes can reduce PFAS concentrations, though the effectiveness varies by treatment method and PFAS compound. UK water companies are not required to publish PFAS removal rates. If you are concerned, a reverse osmosis filter offers the most reliable protection at home.
How to reduce PFAS exposure
A reverse osmosis system is the most effective way to remove PFAS from your drinking water at home, eliminating over 95% of forever chemicals.
Removes >95% of PFAS compounds
Waterdrop G3P600 Reverse Osmosis
Reverse Osmosis · NSF/ANSI 58, NSF/ANSI 372
Why it fits
Removes 12+ contaminants including PFAS and fluoride
Tankless design saves under-sink space
Smart TDS monitoring panel shows real-time water quality
Trade-offs
Professional installation recommended — plumbing required
Get a detailed water quality report for your exact area in Blackpool.
Frequently asked questions
Has PFAS been found in Blackpool water?
Yes. Environment Agency monitoring has detected 15 PFAS compounds across 5 sampling points in water sources near Blackpool. The highest recorded level is 0.052 µg/L (PFOA). Note that this is environmental monitoring of rivers and groundwater, not treated tap water.
What PFAS compounds were found in Blackpool?
The following PFAS compounds have been detected near Blackpool: PFHxS (branched), PFHxS (linear), PFHpA, PFPeS, PFHxA, PFPeA, PFecHS, PFBS, PFBA, 6:2 FTSA, PFOA, PFOS (branched), PFOS (total), PFOS (linear), 6:2 FtSAB. PFOA was recorded at the highest level of 0.052 µg/L.
Is Blackpool tap water safe to drink despite PFAS?
Blackpool tap water meets all current UK legal standards. However, the UK has no legal limit for PFAS in drinking water. The Environment Agency data shows PFAS in source water (rivers and groundwater), not in treated tap water. Water treatment may reduce PFAS levels, but the extent of removal is not publicly reported.
How can I remove PFAS from my water in Blackpool?
The most effective method is a reverse osmosis (RO) filtration system, which removes over 95% of PFAS compounds. Standard carbon filters and jug filters like BRITA do not effectively remove PFAS. An under-sink RO system is recommended for Blackpool households concerned about PFAS exposure.