Skip to main content
tapwater
England and Wales average 9.0

Tap water in PL10, CornwallSafe to drink.Soft.

Supplied by South West Water. 180 samples, 16 substances, latest on 9 December 2025. Everything is inside the legal limit, and nothing comes close to it.

9.5 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

ZeroWater 12-Cup Ready-Pour

ZeroWater 12-Cup Ready-Pour

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

BRITA Marella XL + MAXTRA PRO

BRITA Marella XL + MAXTRA PRO

£25typical price

Basic chlorine and taste improvement on a budget

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

What's in a glass of PL10 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nickel came closest to a limit, at 17% of it. 15 of 15 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitCopper: 0.0025 mg/L, <1% of the 2 mg/L limitCopper<1%Lead: 0.0001 mg/L, 1% of the 0.01 mg/L limitLead1%Cadmium: 0.00006 mg/L, 1% of the 0.005 mg/L limitCadmium1%Bromate: 0.000132 mg/L, 1% of the 0.01 mg/L limitBromate1%Chromium: 0.0008 mg/L, 2% of the 0.05 mg/L limitChromium2%Antimony: 0.0001 mg/L, 2% of the 0.005 mg/L limitAntimony2%Selenium: 0.0012 mg/L, 3% of the 0.04 mg/L limitSelenium3%Turbidity: 0.15 NTU, 4% of the 4 NTU limitTurbidity4%Iron: 0.0076 mg/L, 4% of the 0.2 mg/L limitIron4%Arsenic: 0.00062 mg/L, 6% of the 0.01 mg/L limitArsenic6%Manganese: 0.00349 mg/L, 7% of the 0.05 mg/L limitManganese7%Colour: 2 mg/L Pt/Co, 10% of the 20 mg/L Pt/Co limitColour10%Nitrate: 5 mg/L, 10% of the 50 mg/L limitNitrate10%Aluminium: 0.0257 mg/L, 13% of the 0.2 mg/L limitAluminium13%Nickel: 0.0033 mg/L, 17% of the 0.02 mg/L limitNickel17%
  1. Nickel17%
  2. Aluminium13%
  3. Colour10%
  4. Nitrate10%
  5. Manganese7%
  6. Arsenic6%
  7. Iron4%
  8. Turbidity4%
  9. Selenium3%
  10. Antimony2%
  11. Chromium2%
  12. Bromate1%
  13. Cadmium1%
  14. Lead1%
  15. Copper<1%
  • pH 7.8 pH
All 16 results as a table
SubstanceResultLegal limitShare of limit
Copper0.0025 mg/L2 mg/L
<1%
Lead0.0001 mg/L0.01 mg/L
1%
Nickel0.0033 mg/L0.02 mg/L
17%
Aluminium0.0257 mg/L0.2 mg/L
13%
Colour2 mg/L Pt/Co20 mg/L Pt/Co
10%
Iron0.0076 mg/L0.2 mg/L
4%
Manganese0.00349 mg/L0.05 mg/L
7%
pH7.8 pHNo legal limit–
Turbidity0.15 NTU4 NTU
4%
Bromate0.000132 mg/L0.01 mg/L
1%
Antimony0.0001 mg/L0.005 mg/L
2%
Arsenic0.00062 mg/L0.01 mg/L
6%
Cadmium0.00006 mg/L0.005 mg/L
1%
Chromium0.0008 mg/L0.05 mg/L
2%
Nitrate5 mg/L50 mg/L
10%
Selenium0.0012 mg/L0.04 mg/L
3%

26mg of limescale minerals in every litre

Soft water. Kind to kettles, boilers and skin

You will not need a softener here, and you will use less soap and detergent than most of England.

Soft400 mg/L
Outside your tap

Your estuary is the Plymouth Tamar, rated moderate

The Environment Agency rated the Plymouth Tamar as moderate for ecological health in its 2025 assessment, meaning the estuary is noticeably changed by pollution or engineering. It is held back by nitrogen and seaweed. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

Within 10 km

34

forever-chemical detections in nearby rivers and groundwater

At 2 sites. The highest was 6:2 FTSA at 0.063 µg/L, at Plymouth Garden Centre Crownhill Plymouth Pipe Entering Storage Tank, 9.5 km away, in March 2025. These are river and borehole samples, not tests of your tap water.

Every PFAS sample around Plymouth · Which filters remove PFAS · PFAS explained

PL10 in short

Tap water in PL10 (Cornwall) is supplied by South West Water in the Cornwall Central zone and scores 9.5 out of 10, against an England and Wales average of 9.0. None of the 16 tested substances came close to a limit. The latest sample is from 9 December 2025.

  • 2nd cleanest of 45 areas tested in CornwallOnly 1 area in Cornwall scored higher. The best is EX23 on 9.5.
  • Soft water at 26 mg/LLimescale is not a problem in PL10, so skip softeners and scale filters entirely. How hardness is measured
  • PFAS found at 2 monitoring sites within 10 kmThose are river and groundwater samples, not tap water. The highest was 6:2 FTSA about 9.5 km away. What was measured

Questions about PL10 water

Is PL10 tap water safe to drink?

Based on the latest tests, PL10 (Cornwall) water scores 9.5/10, which is safe. 0 of 16 tested contaminants exceeded recommended levels. Water is supplied by South West Water.

What contaminants are in PL10 water?

We tested 16 contaminants in PL10 water. None exceeded recommended safe levels. PFAS (forever chemicals) were also measured in rivers and groundwater within 10 km, though not in the tap-water tests themselves.

Who supplies water in PL10?

PL10 (Cornwall) is supplied by South West Water. You can view their full profile and compliance data on our supplier page.

Is PL10 water hard or soft?

Water in PL10 (Cornwall) has a hardness of 26 mg/L CaCO3, which is classified as soft. Soft water is gentle on appliances and skin.

Should I use a water filter in PL10?

PL10 water scored 9.5/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in PL10 water?

The tap-water tests we hold for PL10 do not include a PFAS result. Environment Agency monitoring found PFAS in 34 river and groundwater samples from 2 sites within 10 km of PL10, the highest being 6:2 FTSA at 0.063 µg/L about 9.5 km away. These are environmental samples, not tests of tap water. The UK currently has no legal limit for PFAS in drinking water; the Drinking Water Inspectorate uses a 0.1 µg/L guideline for individual compounds. Reverse osmosis filters can reduce PFAS levels.

How clean is the estuary near PL10?

The Environment Agency rated the Plymouth Tamar as moderate for ecological health in its 2025 assessment, meaning the estuary is noticeably changed by pollution or engineering. It is held back by nitrogen and seaweed. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the estuary, not of tap water in PL10, which is treated before it reaches homes.

Keep reading

PFAS explainedHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near PL10

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
pH8 pHNone
Temperature12.2 °CNone
Conductivity410 µS/cmNone
Ammonia0.036 mg/L0.5 mg/L
Nitrate5.1 mg/L50 mg/L
Nitrite0.0041 mg/L0.5 mg/L
Phosphate0.036 mg/LNone
Turbidity2.8 NTU4 NTU
Dissolved Oxygen10.5 mg/LNone

Get alerts for your area

We'll email you when water quality data changes for PL10.

Source: South West Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from