Skip to main content
tapwater
England and Wales average 9.2

Tap water in S33, High PeakSafe to drink.Moderately soft.

Supplied by Severn Trent. 140 samples, 19 substances, latest on 1 December 2025. Everything is inside the legal limit, and nothing comes close to it.

9.6 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

ZeroWater 10-Cup Jug

ZeroWater 10-Cup Jug

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

BRITA Marella XL + MAXTRA PRO

BRITA Marella XL + MAXTRA PRO

£25typical price

Basic chlorine and taste improvement on a budget

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if S33’s water changes

We check for supply incidents every fifteen minutes. If one affects S33, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for S33

What's in a glass of S33 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Iron came closest to a limit, at 24% of it. 16 of 16 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitCopper: 0.0016 mg/L, <1% of the 2 mg/L limitCopper<1%Selenium: 0.00007 mg/L, <1% of the 0.04 mg/L limitSelenium<1%Nitrite: 0.003 mg/L, <1% of the 0.5 mg/L limitNitrite<1%Cadmium: 0.00004 mg/L, <1% of the 0.005 mg/L limitCadmium<1%Chromium: 0.00042 mg/L, <1% of the 0.05 mg/L limitChromium<1%Antimony: 0.000059 mg/L, 1% of the 0.005 mg/L limitAntimony1%Arsenic: 0.00014 mg/L, 1% of the 0.01 mg/L limitArsenic1%Lead: 0.00014 mg/L, 1% of the 0.01 mg/L limitLead1%Manganese: 0.00119 mg/L, 2% of the 0.05 mg/L limitManganese2%Turbidity: 0.12 NTU, 3% of the 4 NTU limitTurbidity3%Fluoride: 0.05 mg/L, 3% of the 1.5 mg/L limitFluoride3%Colour: 0.8 mg/L Pt/Co, 4% of the 20 mg/L Pt/Co limitColour4%Nickel: 0.0014 mg/L, 7% of the 0.02 mg/L limitNickel7%Aluminium: 0.021 mg/L, 11% of the 0.2 mg/L limitAluminium11%Nitrate: 5.8 mg/L, 12% of the 50 mg/L limitNitrate12%Iron: 0.0482 mg/L, 24% of the 0.2 mg/L limitIron24%
  1. Iron24%
  2. Nitrate12%
  3. Aluminium11%
  4. Nickel7%
  5. Colour4%
  6. Fluoride3%
  7. Turbidity3%
  8. Manganese2%
  9. Arsenic1%
  10. Lead1%
  11. Antimony1%
  12. Chromium<1%
  13. Cadmium<1%
  14. Nitrite<1%
  15. Selenium<1%
  16. Copper<1%
  • pH 7.7 pH
  • Conductivity 138 µS/cm
  • Phosphate 1.04 mg/L
All 19 results as a table
SubstanceResultLegal limitShare of limit
Manganese0.00119 mg/L0.05 mg/L
2%
pH7.7 pHNo legal limit–
Turbidity0.12 NTU4 NTU
3%
Conductivity138 µS/cmNo legal limit–
Iron0.0482 mg/L0.2 mg/L
24%
Nickel0.0014 mg/L0.02 mg/L
7%
Fluoride0.05 mg/L1.5 mg/L
3%
Nitrite0.003 mg/L0.5 mg/L
<1%
Nitrate5.8 mg/L50 mg/L
12%
Aluminium0.021 mg/L0.2 mg/L
11%
Arsenic0.00014 mg/L0.01 mg/L
1%
Colour0.8 mg/L Pt/Co20 mg/L Pt/Co
4%
Cadmium0.00004 mg/L0.005 mg/L
<1%
Selenium0.00007 mg/L0.04 mg/L
<1%
Phosphate1.04 mg/LNo legal limit–
Antimony0.000059 mg/L0.005 mg/L
1%
Copper0.0016 mg/L2 mg/L
<1%
Lead0.00014 mg/L0.01 mg/L
1%
Chromium0.00042 mg/L0.05 mg/L
<1%

115mg of limescale minerals in every litre, typical for the S area. S33 has no reading of its own.

Soft water. Kind to kettles, boilers and skin

You will not need a softener here, and you will use less soap and detergent than most of England.

Soft400 mg/L
Outside your tap

Your river is the Peakshole Water Catchment (trib of Noe), rated moderate

The Environment Agency rated the Peakshole Water Catchment (trib of Noe) as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by specific pollutants. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

S33 in short

Tap water in S33 (High Peak) is supplied by Severn Trent and scores 9.6 out of 10, against an England and Wales average of 9.2. None of the 19 tested substances came close to a limit. The latest sample is from 1 December 2025.

  • The cleanest tap water of the 5 areas tested in High PeakS33 scores 9.6 out of 10, ahead of SK17 in second place on 9.4.
  • Scores higher than all 4 neighbouring districtsThe nearest rival is SK17 on 9.4, against 9.6 here. Compare with SK17
  • Nothing tested came within 40% of its legal limitThe highest was Iron at 24% of the 0.2 mg/L maximum. See every reading

Questions about S33 water

Is S33 tap water safe to drink?

Based on the latest tests, S33 (High Peak) water scores 9.6/10, which is safe. 0 of 19 tested contaminants exceeded recommended levels. Water is supplied by Severn Trent.

What contaminants are in S33 water?

We tested 19 contaminants in S33 water. None exceeded recommended safe levels.

Who supplies water in S33?

S33 (High Peak) is supplied by Severn Trent. You can view their full profile and compliance data on our supplier page.

Is S33 water hard or soft?

No hardness reading has been published for S33 itself. Across the S postcode area the typical value is 115 mg/L CaCO3, which is classified as moderately soft. This is a moderate hardness level.

Should I use a water filter in S33?

S33 water scored 9.6/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in S33 water?

No PFAS (forever chemicals) result is attached to the tap-water tests for S33, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.

How clean is the river near S33?

The Environment Agency rated the Peakshole Water Catchment (trib of Noe) as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by specific pollutants. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in S33, which is treated before it reaches homes.

Keep reading

How to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near S33

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
Lead0.011 mg/L0.01 mg/L
pH7.44 pHNone
Temperature14.2 °CNone
Conductivity100 µS/cmNone
Dissolved Oxygen9.9 mg/LNone
Nitrate0.62 mg/L50 mg/L
Ammonia0.074 mg/L0.5 mg/L
Nitrite0.015 mg/L0.5 mg/L
Phosphate0.019 mg/LNone
Cadmium0.00024 mg/L0.005 mg/L
Hardness (as CaCO3)227 mg/LNone
Zinc0.026 mg/LNone
Nickel0.0013 mg/L0.02 mg/L
Copper0.0011 mg/L2 mg/L
Manganese0.014 mg/L0.05 mg/L
Iron0.049 mg/L0.2 mg/L

Source: Severn Trent test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from