Tap water in S44, BolsoverSafe to drink.Moderately soft.
Supplied by Severn Trent. 1,009 samples, 20 substances, latest on 18 December 2025. Everything is inside the legal limit, and nothing comes close to it.
8.7 / 10
The tank is as full as the score. The specks are the minerals that make water hard.
What to do about it

ZeroWater 10-Cup Jug
£40typical price
Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink
£70typical price
High-volume under-sink filtration without RO complexity

BRITA Marella XL + MAXTRA PRO
£25typical price
Basic chlorine and taste improvement on a budget
We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money
Hear about it if S44’s water changes
We check for supply incidents every fifteen minutes. If one affects S44, you get an email the same day. You also get five short emails about your water over the first month.
Want this as a document?
Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.
See the full report for S44What's in a glass of S44 water
Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.
Fluoride came closest to a limit, at 57% of it. 15 of 17 substances used under a quarter of theirs.
- Fluoride57%
- Nitrate54%
- Nickel22%
- Trihalomethanes18%
- Arsenic13%
- Aluminium11%
- Cadmium9%
- Colour8%
- Iron4%
- Turbidity3%
- Copper3%
- Selenium2%
- Lead1%
- Manganese1%
- Antimony1%
- Chromium<1%
- Nitrite<1%
- Phosphate 0.944 mg/L
- Conductivity 301 µS/cm
- pH 7.67 pH
All 20 results as a table
| Substance | Result | Legal limit | Share of limit |
|---|---|---|---|
| Nitrate | 27.1 mg/L | 50 mg/L | 54% |
| Phosphate | 0.944 mg/L | No legal limit | – |
| Conductivity | 301 µS/cm | No legal limit | – |
| Aluminium | 0.021 mg/L | 0.2 mg/L | 11% |
| Antimony | 0.000067 mg/L | 0.005 mg/L | 1% |
| Colour | 1.6 mg/L Pt/Co | 20 mg/L Pt/Co | 8% |
| Cadmium | 0.00044 mg/L | 0.005 mg/L | 9% |
| pH | 7.67 pH | No legal limit | – |
| Turbidity | 0.12 NTU | 4 NTU | 3% |
| Fluoride | 0.86 mg/L | 1.5 mg/L | 57% |
| Trihalomethanes | 0.0178 mg/L | 0.1 mg/L | 18% |
| Arsenic | 0.00134 mg/L | 0.01 mg/L | 13% |
| Iron | 0.0082 mg/L | 0.2 mg/L | 4% |
| Manganese | 0.00073 mg/L | 0.05 mg/L | 1% |
| Lead | 0.00015 mg/L | 0.01 mg/L | 1% |
| Selenium | 0.0007 mg/L | 0.04 mg/L | 2% |
| Nitrite | 0.003 mg/L | 0.5 mg/L | <1% |
| Chromium | 0.00042 mg/L | 0.05 mg/L | <1% |
| Copper | 0.0536 mg/L | 2 mg/L | 3% |
| Nickel | 0.0043 mg/L | 0.02 mg/L | 22% |
115mg of limescale minerals in every litre, typical for the S area. S44 has no reading of its own.
Soft water. Kind to kettles, boilers and skin
You will not need a softener here, and you will use less soap and detergent than most of England.
Your river is the Doe Lea from Source to Hawke Brook, rated poor
The Environment Agency rated the Doe Lea from Source to Hawke Brook as poor for ecological health in its 2025 assessment, meaning the river is badly affected, with much of the expected wildlife missing. It is held back by water plants and algae, fish and insects and other small river life. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.
None of this is a test of your tap water. Environment Agency record · River health across England
S44 in short
Tap water in S44 (Bolsover) is supplied by Severn Trent and scores 8.7 out of 10, against an England and Wales average of 9.2. None of the 20 tested substances came close to a limit. The latest sample is from 18 December 2025.
- Fluoride is the reading closest to its limit, at 57% of the 1.5 mg/L maximumIt passed with room to spare, and everything else tested sat further below its limit. See every reading
- 0.5 points below the national average of 9.2Below the typical tested district in the UK, which is worth knowing before you choose a filter. Compare every area
- Moderately soft water at 115 mg/LLittle limescale to speak of across the S postcode area. A softener would be money wasted. How hardness is measured
Next door
Questions about S44 water
Is S44 tap water safe to drink?
Based on the latest tests, S44 (Bolsover) water scores 8.7/10, which is safe. 0 of 20 tested contaminants exceeded recommended levels. Water is supplied by Severn Trent.
What contaminants are in S44 water?
We tested 20 contaminants in S44 water. None exceeded recommended safe levels.
Who supplies water in S44?
S44 (Bolsover) is supplied by Severn Trent. You can view their full profile and compliance data on our supplier page.
Is S44 water hard or soft?
No hardness reading has been published for S44 itself. Across the S postcode area the typical value is 115 mg/L CaCO3, which is classified as moderately soft. This is a moderate hardness level.
Should I use a water filter in S44?
S44 water scored 8.7/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.
Are there PFAS forever chemicals in S44 water?
No PFAS (forever chemicals) result is attached to the tap-water tests for S44, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.
How clean is the river near S44?
The Environment Agency rated the Doe Lea from Source to Hawke Brook as poor for ecological health in its 2025 assessment, meaning the river is badly affected, with much of the expected wildlife missing. It is held back by water plants and algae, fish and insects and other small river life. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in S44, which is treated before it reaches homes.
Keep reading
- Is UK Tap Water Safe?Everything you need to know about tap water safety in the UK
- Best Water Filters UKEvery filter type compared on what it actually removes
- How to Test Your Tap WaterFrom DIY strips to professional lab analysis
- Best Water Filter Jug UKBRITA vs ZeroWater vs the rest, tested against real data
How to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map
River and groundwater readings near S44
Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.
| Substance | Reading | Drinking water limit |
|---|---|---|
| Aluminium | 0.21 mg/L | 0.2 mg/L |
| Nickel | 0.34 mg/L | 0.02 mg/L |
| pH | 8.63 pH | None |
| Temperature | 10.3 °C | None |
| Conductivity | 1033 µS/cm | None |
| Nitrate | 3.5 mg/L | 50 mg/L |
| Nitrite | 0.017 mg/L | 0.5 mg/L |
| Dissolved Oxygen | 12.5 mg/L | None |
| Ammonia | 0.07 mg/L | 0.5 mg/L |
| Phosphate | 0.088 mg/L | None |
| Lead | 0.0062 mg/L | 0.01 mg/L |
| Cadmium | 0.00018 mg/L | 0.005 mg/L |
| Hardness (as CaCO3) | 294 mg/L | None |
| Chromium | 0.0039 mg/L | 0.05 mg/L |
| Copper | 0.027 mg/L | 2 mg/L |
| Zinc | 0.18 mg/L | None |