Tap water in CV10, Nuneaton and BedworthSafe to drink.
Supplied by Severn Trent. 1,988 samples, 20 substances, latest on 21 December 2025. Everything is inside the legal limit, and nothing comes close to it.
8.9 / 10
The tank is as full as the score.
What to do about it

ZeroWater 12-Cup Ready-Pour
£40typical price
Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink
£70typical price
High-volume under-sink filtration without RO complexity

BRITA Marella XL + MAXTRA PRO
£25typical price
Basic chlorine and taste improvement on a budget
We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money
What's in a glass of CV10 water
Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.
Fluoride came closest to a limit, at 62% of it. 14 of 17 substances used under a quarter of theirs.
- Fluoride62%
- Trihalomethanes44%
- Nitrate27%
- Aluminium11%
- Colour8%
- Nickel7%
- Antimony4%
- Iron3%
- Turbidity3%
- Arsenic2%
- Manganese1%
- Lead1%
- Chromium<1%
- Nitrite<1%
- Selenium<1%
- Copper<1%
- Cadmium<1%
- pH 7.12 pH
- Conductivity 389 µS/cm
- Phosphate 1.03 mg/L
All 20 results as a table
| Substance | Result | Legal limit | Share of limit |
|---|---|---|---|
| pH | 7.12 pH | No legal limit | – |
| Aluminium | 0.021 mg/L | 0.2 mg/L | 11% |
| Colour | 1.6 mg/L Pt/Co | 20 mg/L Pt/Co | 8% |
| Iron | 0.007 mg/L | 0.2 mg/L | 3% |
| Turbidity | 0.12 NTU | 4 NTU | 3% |
| Manganese | 0.00073 mg/L | 0.05 mg/L | 1% |
| Conductivity | 389 µS/cm | No legal limit | – |
| Copper | 0.0074 mg/L | 2 mg/L | <1% |
| Fluoride | 0.93 mg/L | 1.5 mg/L | 62% |
| Arsenic | 0.00022 mg/L | 0.01 mg/L | 2% |
| Cadmium | 0.00001 mg/L | 0.005 mg/L | <1% |
| Chromium | 0.00042 mg/L | 0.05 mg/L | <1% |
| Nickel | 0.0013 mg/L | 0.02 mg/L | 7% |
| Lead | 0.00014 mg/L | 0.01 mg/L | 1% |
| Antimony | 0.000222 mg/L | 0.005 mg/L | 4% |
| Selenium | 0.00015 mg/L | 0.04 mg/L | <1% |
| Nitrate | 13.5 mg/L | 50 mg/L | 27% |
| Nitrite | 0.003 mg/L | 0.5 mg/L | <1% |
| Trihalomethanes | 0.0444 mg/L | 0.1 mg/L | 44% |
| Phosphate | 1.03 mg/L | No legal limit | – |
Your river is the Anker from Wem Brook to River Sence, rated moderate
The Environment Agency rated the Anker from Wem Brook to River Sence as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by phosphate, fish and insects and other small river life. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.
None of this is a test of your tap water. Environment Agency record · River health across England
10
forever-chemical detections in nearby rivers and groundwater
At 1 site. The highest was PFBS at 0.0029 µg/L, at Didgeley Brook at R Bourne Confluence, 7.2 km away, in November 2024. These are river and borehole samples, not tests of your tap water.
Every PFAS sample around Coventry · Which filters remove PFAS · PFAS explained
CV10 in short
Tap water in CV10 (Nuneaton and Bedworth) is supplied by Severn Trent in the Nuneaton and Bedworth Central zone and scores 8.9 out of 10, against an England and Wales average of 9.0. None of the 20 tested substances came close to a limit. The latest sample is from 21 December 2025.
- Fluoride is the reading closest to its limit, at 62% of the 1.5 mg/L maximumIt passed with room to spare, and everything else tested sat further below its limit. See every reading
- 2nd cleanest of 3 areas tested in Nuneaton and BedworthSquarely mid-table for Nuneaton and Bedworth, between CV12 on 9 and CV11 on 8.3.
- PFAS found at 1 monitoring site within 10 kmThose are river and groundwater samples, not tap water. The highest was PFBS about 7.2 km away. What was measured
Next door
Questions about CV10 water
Is CV10 tap water safe to drink?
Based on the latest tests, CV10 (Nuneaton and Bedworth) water scores 8.9/10, which is safe. 0 of 20 tested contaminants exceeded recommended levels. Water is supplied by Severn Trent.
What contaminants are in CV10 water?
We tested 20 contaminants in CV10 water. None exceeded recommended safe levels. PFAS (forever chemicals) were also measured in rivers and groundwater within 10 km, though not in the tap-water tests themselves.
Who supplies water in CV10?
CV10 (Nuneaton and Bedworth) is supplied by Severn Trent. You can view their full profile and compliance data on our supplier page.
Should I use a water filter in CV10?
CV10 water scored 8.9/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.
Are there PFAS forever chemicals in CV10 water?
The tap-water tests we hold for CV10 do not include a PFAS result. Environment Agency monitoring found PFAS in 10 river and groundwater samples from 1 sites within 10 km of CV10, the highest being PFBS at 0.0029 µg/L about 7.2 km away. These are environmental samples, not tests of tap water. The UK currently has no legal limit for PFAS in drinking water; the Drinking Water Inspectorate uses a 0.1 µg/L guideline for individual compounds. Reverse osmosis filters can reduce PFAS levels.
How clean is the river near CV10?
The Environment Agency rated the Anker from Wem Brook to River Sence as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by phosphate, fish and insects and other small river life. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in CV10, which is treated before it reaches homes.
Keep reading
- Best Filter for PFAS RemovalThe filters with independent certification to remove forever chemicals
- PFAS Forever ChemicalsWhat PFAS are and how to reduce your exposure at home
- Is UK Tap Water Safe?Everything you need to know about tap water safety in the UK
- Best Water Filters UKEvery filter type compared on what it actually removes
PFAS explainedHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map
River and groundwater readings near CV10
Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.
Get alerts for your area
We'll email you when water quality data changes for CV10.