Skip to main content
tapwater
England and Wales average 9.2

Tap water in KY15, FifeSafe to drink.Moderately soft.

Supplied by Scottish Water. 50 samples, 22 substances, latest on 31 December 2025. Everything is inside the legal limit, and nothing comes close to it.

9.4 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

ZeroWater 10-Cup Jug

ZeroWater 10-Cup Jug

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

BRITA Marella XL + MAXTRA PRO

BRITA Marella XL + MAXTRA PRO

£25typical price

Basic chlorine and taste improvement on a budget

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if KY15’s water changes

We check for supply incidents every fifteen minutes. If one affects KY15, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for KY15

What's in a glass of KY15 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Trihalomethanes came closest to a limit, at 25% of it. 20 of 20 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitCadmium: 0.00002 mg/L, <1% of the 0.005 mg/L limitCadmium<1%Copper: 0.02 mg/L, 1% of the 2 mg/L limitCopper1%Chromium: 0.00063 mg/L, 1% of the 0.05 mg/L limitChromium1%Boron: 0.02 mg/L, 2% of the 1 mg/L limitBoron2%Arsenic: 0.00023 mg/L, 2% of the 0.01 mg/L limitArsenic2%Mercury: 0.00003 mg/L, 3% of the 0.001 mg/L limitMercury3%Selenium: 0.0012 mg/L, 3% of the 0.04 mg/L limitSelenium3%Nickel: 0.0008 mg/L, 4% of the 0.02 mg/L limitNickel4%Nitrite: 0.02 mg/L, 4% of the 0.5 mg/L limitNitrite4%Manganese: 0.00276 mg/L, 6% of the 0.05 mg/L limitManganese6%Iron: 0.0114 mg/L, 6% of the 0.2 mg/L limitIron6%Aluminium: 0.0146 mg/L, 7% of the 0.2 mg/L limitAluminium7%Turbidity: 0.3 NTU, 8% of the 4 NTU limitTurbidity8%Antimony: 0.0004 mg/L, 8% of the 0.005 mg/L limitAntimony8%Fluoride: 0.13 mg/L, 9% of the 1.5 mg/L limitFluoride9%Bromate: 0.0009 mg/L, 9% of the 0.01 mg/L limitBromate9%Colour: 2 mg/L Pt/Co, 10% of the 20 mg/L Pt/Co limitColour10%Nitrate: 7.03 mg/L, 14% of the 50 mg/L limitNitrate14%Lead: 0.00148 mg/L, 15% of the 0.01 mg/L limitLead15%Trihalomethanes: 0.0246 mg/L, 25% of the 0.1 mg/L limitTrihalomethanes25%
  1. Trihalomethanes25%
  2. Lead15%
  3. Nitrate14%
  4. Colour10%
  5. Bromate9%
  6. Fluoride9%
  7. Antimony8%
  8. Turbidity8%
  9. Aluminium7%
  10. Iron6%
  11. Manganese6%
  12. Nickel4%
  13. Nitrite4%
  14. Mercury3%
  15. Selenium3%
  16. Arsenic2%
  17. Boron2%
  18. Chromium1%
  19. Copper1%
  20. Cadmium<1%
  • E. coli none found
  • Coliform Bacteria none found
All 22 results as a table
SubstanceResultLegal limitShare of limit
Selenium0.0012 mg/L0.04 mg/L
3%
Iron0.0114 mg/L0.2 mg/L
6%
Chromium0.00063 mg/L0.05 mg/L
1%
Colour2 mg/L Pt/Co20 mg/L Pt/Co
10%
Arsenic0.00023 mg/L0.01 mg/L
2%
Trihalomethanes0.0246 mg/L0.1 mg/L
25%
Mercury0.00003 mg/L0.001 mg/L
3%
Nickel0.0008 mg/L0.02 mg/L
4%
Turbidity0.3 NTU4 NTU
8%
Aluminium0.0146 mg/L0.2 mg/L
7%
E. coli0 count/100mlMust be zeroNone found
Fluoride0.13 mg/L1.5 mg/L
9%
Nitrate7.03 mg/L50 mg/L
14%
Copper0.02 mg/L2 mg/L
1%
Boron0.02 mg/L1 mg/L
2%
Antimony0.0004 mg/L0.005 mg/L
8%
Manganese0.00276 mg/L0.05 mg/L
6%
Coliform Bacteria0 count/100mlMust be zeroNone found
Nitrite0.02 mg/L0.5 mg/L
4%
Bromate0.0009 mg/L0.01 mg/L
9%
Lead0.00148 mg/L0.01 mg/L
15%
Cadmium0.00002 mg/L0.005 mg/L
<1%

99mg of limescale minerals in every litre

Soft water. Kind to kettles, boilers and skin

You will not need a softener here, and you will use less soap and detergent than most of England.

Soft400 mg/L

KY15 in short

Tap water in KY15 (Fife) is supplied by Scottish Water in the Lomond Hills BH Mix zone and scores 9.4 out of 10, against an England and Wales average of 9.2. None of the 22 tested substances came close to a limit. The latest sample is from 31 December 2025.

  • 4th cleanest of 14 areas tested in FifeOnly 3 areas in Fife scored higher. The best is DD6 on 9.5.
  • Nothing tested came within 40% of its legal limitThe highest was Trihalomethanes at 25% of the 0.1 mg/L maximum. See every reading
  • Moderately soft water at 99 mg/LLittle limescale to speak of in KY15. A softener would be money wasted. How hardness is measured

Questions about KY15 water

Is KY15 tap water safe to drink?

Based on the latest tests, KY15 (Fife) water scores 9.4/10, which is safe. 0 of 22 tested contaminants exceeded recommended levels. Water is supplied by Scottish Water.

What contaminants are in KY15 water?

We tested 22 contaminants in KY15 water. None exceeded recommended safe levels.

Who supplies water in KY15?

KY15 (Fife) is supplied by Scottish Water. You can view their full profile and compliance data on our supplier page.

Is KY15 water hard or soft?

Water in KY15 (Fife) has a hardness of 99 mg/L CaCO3, which is classified as moderately soft. This is a moderate hardness level.

Should I use a water filter in KY15?

KY15 water scored 9.4/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in KY15 water?

No PFAS (forever chemicals) result is attached to the tap-water tests for KY15, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.

Source: Scottish Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from