Skip to main content
tapwater
England and Wales average 9.2

Tap water in PH20, HighlandSafe to drink.Soft.

Supplied by Scottish Water. 50 samples, 22 substances, latest on 31 December 2025. Everything is inside the legal limit, and nothing comes close to it.

9.6 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

ZeroWater 10-Cup Jug

ZeroWater 10-Cup Jug

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

BRITA Marella XL + MAXTRA PRO

BRITA Marella XL + MAXTRA PRO

£25typical price

Basic chlorine and taste improvement on a budget

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if PH20’s water changes

We check for supply incidents every fifteen minutes. If one affects PH20, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for PH20

What's in a glass of PH20 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Fluoride came closest to a limit, at 21% of it. 20 of 20 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitCopper: 0.01 mg/L, <1% of the 2 mg/L limitCopper<1%Cadmium: 0.00003 mg/L, <1% of the 0.005 mg/L limitCadmium<1%Chromium: 0.0006 mg/L, 1% of the 0.05 mg/L limitChromium1%Mercury: 0.00002 mg/L, 2% of the 0.001 mg/L limitMercury2%Boron: 0.02 mg/L, 2% of the 1 mg/L limitBoron2%Arsenic: 0.0002 mg/L, 2% of the 0.01 mg/L limitArsenic2%Selenium: 0.0012 mg/L, 3% of the 0.04 mg/L limitSelenium3%Lead: 0.00037 mg/L, 4% of the 0.01 mg/L limitLead4%Nickel: 0.0008 mg/L, 4% of the 0.02 mg/L limitNickel4%Iron: 0.00805 mg/L, 4% of the 0.2 mg/L limitIron4%Aluminium: 0.00882 mg/L, 4% of the 0.2 mg/L limitAluminium4%Manganese: 0.00236 mg/L, 5% of the 0.05 mg/L limitManganese5%Trihalomethanes: 0.0049 mg/L, 5% of the 0.1 mg/L limitTrihalomethanes5%Nitrate: 2.88 mg/L, 6% of the 50 mg/L limitNitrate6%Nitrite: 0.03 mg/L, 6% of the 0.5 mg/L limitNitrite6%Turbidity: 0.3 NTU, 8% of the 4 NTU limitTurbidity8%Antimony: 0.0004 mg/L, 8% of the 0.005 mg/L limitAntimony8%Bromate: 0.0009 mg/L, 9% of the 0.01 mg/L limitBromate9%Colour: 2 mg/L Pt/Co, 10% of the 20 mg/L Pt/Co limitColour10%Fluoride: 0.32 mg/L, 21% of the 1.5 mg/L limitFluoride21%
  1. Fluoride21%
  2. Colour10%
  3. Bromate9%
  4. Antimony8%
  5. Turbidity8%
  6. Nitrite6%
  7. Nitrate6%
  8. Trihalomethanes5%
  9. Manganese5%
  10. Aluminium4%
  11. Iron4%
  12. Nickel4%
  13. Lead4%
  14. Selenium3%
  15. Mercury2%
  16. Boron2%
  17. Arsenic2%
  18. Chromium1%
  19. Cadmium<1%
  20. Copper<1%
  • E. coli none found
  • Coliform Bacteria none found
All 22 results as a table
SubstanceResultLegal limitShare of limit
Turbidity0.3 NTU4 NTU
8%
Nitrite0.03 mg/L0.5 mg/L
6%
Bromate0.0009 mg/L0.01 mg/L
9%
Iron0.00805 mg/L0.2 mg/L
4%
Fluoride0.32 mg/L1.5 mg/L
21%
Mercury0.00002 mg/L0.001 mg/L
2%
Selenium0.0012 mg/L0.04 mg/L
3%
Aluminium0.00882 mg/L0.2 mg/L
4%
Lead0.00037 mg/L0.01 mg/L
4%
Nitrate2.88 mg/L50 mg/L
6%
Nickel0.0008 mg/L0.02 mg/L
4%
Cadmium0.00003 mg/L0.005 mg/L
<1%
Chromium0.0006 mg/L0.05 mg/L
1%
Manganese0.00236 mg/L0.05 mg/L
5%
Colour2 mg/L Pt/Co20 mg/L Pt/Co
10%
Boron0.02 mg/L1 mg/L
2%
E. coli0 count/100mlMust be zeroNone found
Coliform Bacteria0 count/100mlMust be zeroNone found
Trihalomethanes0.0049 mg/L0.1 mg/L
5%
Arsenic0.0002 mg/L0.01 mg/L
2%
Copper0.01 mg/L2 mg/L
<1%
Antimony0.0004 mg/L0.005 mg/L
8%

58mg of limescale minerals in every litre

Soft water. Kind to kettles, boilers and skin

You will not need a softener here, and you will use less soap and detergent than most of England.

Soft400 mg/L

PH20 in short

Tap water in PH20 (Highland) is supplied by Scottish Water in the Aviemore zone and scores 9.6 out of 10, against an England and Wales average of 9.2. None of the 22 tested substances came close to a limit. The latest sample is from 31 December 2025.

  • 19th cleanest of 84 areas tested in InvernessOnly 18 areas in Inverness scored higher. The best is IV1 on 9.6. Every area in Inverness
  • Soft water at 58 mg/LLimescale is not a problem in PH20, so skip softeners and scale filters entirely. How hardness is measured
  • Nothing tested came within 40% of its legal limitThe highest was Fluoride at 21% of the 1.5 mg/L maximum. See every reading

Questions about PH20 water

Is PH20 tap water safe to drink?

Based on the latest tests, PH20 (Highland) water scores 9.6/10, which is safe. 0 of 22 tested contaminants exceeded recommended levels. Water is supplied by Scottish Water.

What contaminants are in PH20 water?

We tested 22 contaminants in PH20 water. None exceeded recommended safe levels.

Who supplies water in PH20?

PH20 (Highland) is supplied by Scottish Water. You can view their full profile and compliance data on our supplier page.

Is PH20 water hard or soft?

Water in PH20 (Highland) has a hardness of 58 mg/L CaCO3, which is classified as soft. Soft water is gentle on appliances and skin.

Should I use a water filter in PH20?

PH20 water scored 9.6/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in PH20 water?

No PFAS (forever chemicals) result is attached to the tap-water tests for PH20, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.

Source: Scottish Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from