Tap water in PH31, HighlandSafe to drink.Moderately soft.
Supplied by Scottish Water. 50 samples, 22 substances, latest on 31 December 2025. Everything is inside the legal limit, and nothing comes close to it.
9.6 / 10
The tank is as full as the score. The specks are the minerals that make water hard.
What to do about it

ZeroWater 10-Cup Jug
£40typical price
Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink
£70typical price
High-volume under-sink filtration without RO complexity

BRITA Marella XL + MAXTRA PRO
£25typical price
Basic chlorine and taste improvement on a budget
We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money
Hear about it if PH31’s water changes
We check for supply incidents every fifteen minutes. If one affects PH31, you get an email the same day. You also get five short emails about your water over the first month.
Want this as a document?
Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.
See the full report for PH31What's in a glass of PH31 water
Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.
Fluoride came closest to a limit, at 21% of it. 20 of 20 substances used under a quarter of theirs.
- Fluoride21%
- Colour10%
- Bromate9%
- Antimony8%
- Turbidity8%
- Nitrite6%
- Nitrate6%
- Trihalomethanes5%
- Manganese5%
- Aluminium4%
- Iron4%
- Nickel4%
- Lead4%
- Selenium3%
- Mercury2%
- Arsenic2%
- Boron2%
- Chromium1%
- Cadmium<1%
- Copper<1%
- Coliform Bacteria none found
- E. coli none found
All 22 results as a table
| Substance | Result | Legal limit | Share of limit |
|---|---|---|---|
| Copper | 0.01 mg/L | 2 mg/L | <1% |
| Iron | 0.00805 mg/L | 0.2 mg/L | 4% |
| Mercury | 0.00002 mg/L | 0.001 mg/L | 2% |
| Turbidity | 0.3 NTU | 4 NTU | 8% |
| Manganese | 0.00236 mg/L | 0.05 mg/L | 5% |
| Fluoride | 0.32 mg/L | 1.5 mg/L | 21% |
| Nitrate | 2.88 mg/L | 50 mg/L | 6% |
| Arsenic | 0.0002 mg/L | 0.01 mg/L | 2% |
| Cadmium | 0.00003 mg/L | 0.005 mg/L | <1% |
| Bromate | 0.0009 mg/L | 0.01 mg/L | 9% |
| Coliform Bacteria | 0 count/100ml | Must be zero | None found |
| Nitrite | 0.03 mg/L | 0.5 mg/L | 6% |
| Trihalomethanes | 0.0049 mg/L | 0.1 mg/L | 5% |
| Lead | 0.00037 mg/L | 0.01 mg/L | 4% |
| Selenium | 0.0012 mg/L | 0.04 mg/L | 3% |
| Colour | 2 mg/L Pt/Co | 20 mg/L Pt/Co | 10% |
| E. coli | 0 count/100ml | Must be zero | None found |
| Boron | 0.02 mg/L | 1 mg/L | 2% |
| Antimony | 0.0004 mg/L | 0.005 mg/L | 8% |
| Chromium | 0.0006 mg/L | 0.05 mg/L | 1% |
| Aluminium | 0.00882 mg/L | 0.2 mg/L | 4% |
| Nickel | 0.0008 mg/L | 0.02 mg/L | 4% |
69mg of limescale minerals in every litre
Soft water. Kind to kettles, boilers and skin
You will not need a softener here, and you will use less soap and detergent than most of England.
PH31 in short
Tap water in PH31 (Highland) is supplied by Scottish Water in the Aviemore zone and scores 9.6 out of 10, against an England and Wales average of 9.2. None of the 22 tested substances came close to a limit. The latest sample is from 31 December 2025.
- 27th cleanest of 84 areas tested in InvernessOnly 26 areas in Inverness scored higher. The best is IV1 on 9.6. Every area in Inverness
- Nothing tested came within 40% of its legal limitThe highest was Fluoride at 21% of the 1.5 mg/L maximum. See every reading
- Moderately soft water at 69 mg/LLittle limescale to speak of in PH31. A softener would be money wasted. How hardness is measured
Questions about PH31 water
Is PH31 tap water safe to drink?
Based on the latest tests, PH31 (Highland) water scores 9.6/10, which is safe. 0 of 22 tested contaminants exceeded recommended levels. Water is supplied by Scottish Water.
What contaminants are in PH31 water?
We tested 22 contaminants in PH31 water. None exceeded recommended safe levels.
Who supplies water in PH31?
PH31 (Highland) is supplied by Scottish Water. You can view their full profile and compliance data on our supplier page.
Is PH31 water hard or soft?
Water in PH31 (Highland) has a hardness of 69 mg/L CaCO3, which is classified as moderately soft. This is a moderate hardness level.
Should I use a water filter in PH31?
PH31 water scored 9.6/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.
Are there PFAS forever chemicals in PH31 water?
No PFAS (forever chemicals) result is attached to the tap-water tests for PH31, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.
Keep reading
- Is UK Tap Water Safe?Everything you need to know about tap water safety in the UK
- Best Water Filters UKEvery filter type compared on what it actually removes
- How to Test Your Tap WaterFrom DIY strips to professional lab analysis
- Best Water Filter Jug UKBRITA vs ZeroWater vs the rest, tested against real data
How to test your waterBest water filtersFilter shower headsWater testing kitsAll of InvernessUK water rankingsWater hardness checkerWater hardness map