Tap water in PH50, HighlandSafe to drink.Soft.
Supplied by Scottish Water. 50 samples, 22 substances, latest on 31 December 2025. Everything is inside the legal limit, and nothing comes close to it.
9.6 / 10
The tank is as full as the score. The specks are the minerals that make water hard.
What to do about it

ZeroWater 10-Cup Jug
£40typical price
Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink
£70typical price
High-volume under-sink filtration without RO complexity

BRITA Marella XL + MAXTRA PRO
£25typical price
Basic chlorine and taste improvement on a budget
We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money
Hear about it if PH50’s water changes
We check for supply incidents every fifteen minutes. If one affects PH50, you get an email the same day. You also get five short emails about your water over the first month.
Want this as a document?
Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.
See the full report for PH50What's in a glass of PH50 water
Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.
Fluoride came closest to a limit, at 21% of it. 20 of 20 substances used under a quarter of theirs.
- Fluoride21%
- Colour10%
- Bromate9%
- Antimony8%
- Turbidity8%
- Nitrite6%
- Nitrate6%
- Trihalomethanes5%
- Manganese5%
- Aluminium4%
- Iron4%
- Nickel4%
- Lead4%
- Selenium3%
- Arsenic2%
- Mercury2%
- Boron2%
- Chromium1%
- Cadmium<1%
- Copper<1%
- Coliform Bacteria none found
- E. coli none found
All 22 results as a table
| Substance | Result | Legal limit | Share of limit |
|---|---|---|---|
| Lead | 0.00037 mg/L | 0.01 mg/L | 4% |
| Cadmium | 0.00003 mg/L | 0.005 mg/L | <1% |
| Coliform Bacteria | 0 count/100ml | Must be zero | None found |
| Copper | 0.01 mg/L | 2 mg/L | <1% |
| Arsenic | 0.0002 mg/L | 0.01 mg/L | 2% |
| Bromate | 0.0009 mg/L | 0.01 mg/L | 9% |
| Mercury | 0.00002 mg/L | 0.001 mg/L | 2% |
| Nitrite | 0.03 mg/L | 0.5 mg/L | 6% |
| Colour | 2 mg/L Pt/Co | 20 mg/L Pt/Co | 10% |
| Nitrate | 2.88 mg/L | 50 mg/L | 6% |
| Aluminium | 0.00882 mg/L | 0.2 mg/L | 4% |
| Chromium | 0.0006 mg/L | 0.05 mg/L | 1% |
| Trihalomethanes | 0.0049 mg/L | 0.1 mg/L | 5% |
| Turbidity | 0.3 NTU | 4 NTU | 8% |
| Manganese | 0.00236 mg/L | 0.05 mg/L | 5% |
| Iron | 0.00805 mg/L | 0.2 mg/L | 4% |
| E. coli | 0 count/100ml | Must be zero | None found |
| Nickel | 0.0008 mg/L | 0.02 mg/L | 4% |
| Antimony | 0.0004 mg/L | 0.005 mg/L | 8% |
| Selenium | 0.0012 mg/L | 0.04 mg/L | 3% |
| Boron | 0.02 mg/L | 1 mg/L | 2% |
| Fluoride | 0.32 mg/L | 1.5 mg/L | 21% |
8mg of limescale minerals in every litre
Soft water. Kind to kettles, boilers and skin
You will not need a softener here, and you will use less soap and detergent than most of England.
PH50 in short
Tap water in PH50 (Highland) is supplied by Scottish Water in the Aviemore zone and scores 9.6 out of 10, against an England and Wales average of 9.2. None of the 22 tested substances came close to a limit. The latest sample is from 31 December 2025.
- Soft water at 8 mg/LLimescale is not a problem in PH50, so skip softeners and scale filters entirely. How hardness is measured
- 42nd cleanest of 84 areas tested in InvernessSquarely mid-table for Inverness, between IV1 on 9.6 and IV63 on 9.3. Every area in Inverness
- Nothing tested came within 40% of its legal limitThe highest was Fluoride at 21% of the 1.5 mg/L maximum. See every reading
Questions about PH50 water
Is PH50 tap water safe to drink?
Based on the latest tests, PH50 (Highland) water scores 9.6/10, which is safe. 0 of 22 tested contaminants exceeded recommended levels. Water is supplied by Scottish Water.
What contaminants are in PH50 water?
We tested 22 contaminants in PH50 water. None exceeded recommended safe levels.
Who supplies water in PH50?
PH50 (Highland) is supplied by Scottish Water. You can view their full profile and compliance data on our supplier page.
Is PH50 water hard or soft?
Water in PH50 (Highland) has a hardness of 8 mg/L CaCO3, which is classified as soft. Soft water is gentle on appliances and skin.
Should I use a water filter in PH50?
PH50 water scored 9.6/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.
Are there PFAS forever chemicals in PH50 water?
No PFAS (forever chemicals) result is attached to the tap-water tests for PH50, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.
Keep reading
- Is UK Tap Water Safe?Everything you need to know about tap water safety in the UK
- Best Water Filters UKEvery filter type compared on what it actually removes
- How to Test Your Tap WaterFrom DIY strips to professional lab analysis
- Best Water Filter Jug UKBRITA vs ZeroWater vs the rest, tested against real data
How to test your waterBest water filtersFilter shower headsWater testing kitsAll of InvernessUK water rankingsWater hardness checkerWater hardness map