Skip to main content
tapwater
England and Wales average 9.0

Tap water in SA2, SwanseaSafe to drink.

Supplied by Dŵr Cymru Welsh Water. 1,150 samples, 23 substances, latest on 19 December 2024. Everything is inside the legal limit, and nothing comes close to it.

See the filter we recommendSee everything that was tested

9.5 / 10

The tank is as full as the score.

What to do about it

ZeroWater 12-Cup Ready-Pour

ZeroWater 12-Cup Ready-Pour

£40typical price

Households concerned about PFAS and heavy metals

Check price at Amazon (opens in new tab)
Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

Check price at Waterdrop (opens in new tab)
BRITA Marella XL + MAXTRA PRO

BRITA Marella XL + MAXTRA PRO

£25typical price

Basic chlorine and taste improvement on a budget

Check price at Amazon (opens in new tab)

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

What's in a glass of SA2 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Trihalomethanes came closest to a limit, at 29% of it. 19 of 20 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitBromate: 3.1e-7 mg/L, <1% of the 0.01 mg/L limitBromate<1%Cadmium: 0.000025 mg/L, <1% of the 0.005 mg/L limitCadmium<1%Selenium: 0.00023 mg/L, <1% of the 0.04 mg/L limitSelenium<1%Antimony: 0.000031 mg/L, <1% of the 0.005 mg/L limitAntimony<1%Arsenic: 0.00015 mg/L, 1% of the 0.01 mg/L limitArsenic1%Aluminium: 0.005 mg/L, 3% of the 0.2 mg/L limitAluminium3%Boron: 0.028 mg/L, 3% of the 1 mg/L limitBoron3%Copper: 0.058 mg/L, 3% of the 2 mg/L limitCopper3%Nickel: 0.00059 mg/L, 3% of the 0.02 mg/L limitNickel3%Chromium: 0.0015 mg/L, 3% of the 0.05 mg/L limitChromium3%Manganese: 0.0019 mg/L, 4% of the 0.05 mg/L limitManganese4%Mercury: 0.000042 mg/L, 4% of the 0.001 mg/L limitMercury4%Nitrate: 2.81 mg/L, 6% of the 50 mg/L limitNitrate6%Turbidity: 0.27 NTU, 7% of the 4 NTU limitTurbidity7%Fluoride: 0.11 mg/L, 7% of the 1.5 mg/L limitFluoride7%Lead: 0.00075 mg/L, 8% of the 0.01 mg/L limitLead8%Nitrite: 0.06 mg/L, 12% of the 0.5 mg/L limitNitrite12%Iron: 0.036 mg/L, 18% of the 0.2 mg/L limitIron18%Colour: 4.6 mg/L Pt/Co, 23% of the 20 mg/L Pt/Co limitColour23%Trihalomethanes: 0.029 mg/L, 29% of the 0.1 mg/L limitTrihalomethanes29%
  1. Trihalomethanes29%
  2. Colour23%
  3. Iron18%
  4. Nitrite12%
  5. Lead8%
  6. Fluoride7%
  7. Turbidity7%
  8. Nitrate6%
  9. Mercury4%
  10. Manganese4%
  11. Chromium3%
  12. Nickel3%
  13. Copper3%
  14. Boron3%
  15. Aluminium3%
  16. Arsenic1%
  17. Antimony<1%
  18. Selenium<1%
  19. Cadmium<1%
  20. Bromate<1%
  • E. coli none found
  • Coliform Bacteria none found
  • Conductivity 120 µS/cm
All 23 results as a table
SubstanceResultLegal limitShare of limit
E. coli0 count/100mlMust be zeroNone found
Coliform Bacteria0 count/100mlMust be zeroNone found
Conductivity120 µS/cmNo legal limit–
Iron0.036 mg/L0.2 mg/L
18%
Manganese0.0019 mg/L0.05 mg/L
4%
Aluminium0.005 mg/L0.2 mg/L
3%
Colour4.6 mg/L Pt/Co20 mg/L Pt/Co
23%
Turbidity0.27 NTU4 NTU
7%
Boron0.028 mg/L1 mg/L
3%
Lead0.00075 mg/L0.01 mg/L
8%
Antimony0.000031 mg/L0.005 mg/L
<1%
Selenium0.00023 mg/L0.04 mg/L
<1%
Nickel0.00059 mg/L0.02 mg/L
3%
Mercury0.000042 mg/L0.001 mg/L
4%
Cadmium0.000025 mg/L0.005 mg/L
<1%
Arsenic0.00015 mg/L0.01 mg/L
1%
Copper0.058 mg/L2 mg/L
3%
Chromium0.0015 mg/L0.05 mg/L
3%
Fluoride0.11 mg/L1.5 mg/L
7%
Nitrite0.06 mg/L0.5 mg/L
12%
Nitrate2.81 mg/L50 mg/L
6%
Bromate3.1e-7 mg/L0.01 mg/L
<1%
Trihalomethanes0.029 mg/L0.1 mg/L
29%

SA2 in short

Tap water in SA2 (Swansea) is supplied by Dŵr Cymru Welsh Water in the Swansea Central zone and scores 9.5 out of 10, against an England and Wales average of 9.0. None of the 23 tested substances came close to a limit. The latest sample is from 19 December 2024.

  • 5th cleanest of 7 areas tested in Swansea2 areas in Swansea scored lower. The best is SA1 on 9.6. Every area in Swansea
  • Nothing tested came within 40% of its legal limitThe highest was Trihalomethanes at 29% of the 0.1 mg/L maximum. See every reading
  • Scores higher than 0 of 6 neighbouring districtsWater here is typical for the immediate area, which usually means the same treatment works and the same supply zone.

Next door

SA19.6 out of 10SA39.6 out of 10SA49.6 out of 10SA59.5 out of 10SA69.6 out of 10SA79.5 out of 10

Questions about SA2 water

Is SA2 tap water safe to drink?

Based on the latest tests, SA2 (Swansea) water scores 9.5/10, which is safe. 0 of 23 tested contaminants exceeded recommended levels. Water is supplied by Dŵr Cymru Welsh Water.

What contaminants are in SA2 water?

We tested 23 contaminants in SA2 water. None exceeded recommended safe levels.

Who supplies water in SA2?

SA2 (Swansea) is supplied by Dŵr Cymru Welsh Water. You can view their full profile and compliance data on our supplier page.

Should I use a water filter in SA2?

SA2 water scored 9.5/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in SA2 water?

No PFAS (forever chemicals) result is attached to the tap-water tests for SA2, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.

Keep reading

How to test your waterBest water filtersFilter shower headsWater testing kitsAll of SwanseaUK water rankingsWater hardness checkerWater hardness map

Get alerts for your area

We'll email you when water quality data changes for SA2.

Source: Dŵr Cymru Welsh Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from