Skip to main content
tapwater
England and Wales average 9.2

Tap water in SA3, SwanseaSafe to drink.

Supplied by Dŵr Cymru Welsh Water. 861 samples, 22 substances, latest on 23 December 2024. Everything is inside the legal limit, and nothing comes close to it.

9.6 / 10

The tank is as full as the score.

What to do about it

ZeroWater 10-Cup Jug

ZeroWater 10-Cup Jug

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

BRITA Marella XL + MAXTRA PRO

BRITA Marella XL + MAXTRA PRO

£25typical price

Basic chlorine and taste improvement on a budget

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if SA3’s water changes

We check for supply incidents every fifteen minutes. If one affects SA3, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for SA3

What's in a glass of SA3 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Colour came closest to a limit, at 23% of it. 19 of 19 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitChromium: 0.000094 mg/L, <1% of the 0.05 mg/L limitChromium<1%Cadmium: 0.000025 mg/L, <1% of the 0.005 mg/L limitCadmium<1%Selenium: 0.00023 mg/L, <1% of the 0.04 mg/L limitSelenium<1%Antimony: 0.00004 mg/L, <1% of the 0.005 mg/L limitAntimony<1%Arsenic: 0.00011 mg/L, 1% of the 0.01 mg/L limitArsenic1%Lead: 0.00016 mg/L, 2% of the 0.01 mg/L limitLead2%Manganese: 0.0011 mg/L, 2% of the 0.05 mg/L limitManganese2%Aluminium: 0.005 mg/L, 3% of the 0.2 mg/L limitAluminium3%Boron: 0.028 mg/L, 3% of the 1 mg/L limitBoron3%Copper: 0.058 mg/L, 3% of the 2 mg/L limitCopper3%Nickel: 0.00059 mg/L, 3% of the 0.02 mg/L limitNickel3%Mercury: 0.000042 mg/L, 4% of the 0.001 mg/L limitMercury4%Iron: 0.011 mg/L, 5% of the 0.2 mg/L limitIron5%Turbidity: 0.27 NTU, 7% of the 4 NTU limitTurbidity7%Nitrate: 3.5 mg/L, 7% of the 50 mg/L limitNitrate7%Fluoride: 0.11 mg/L, 7% of the 1.5 mg/L limitFluoride7%Nitrite: 0.074 mg/L, 15% of the 0.5 mg/L limitNitrite15%Trihalomethanes: 0.017 mg/L, 17% of the 0.1 mg/L limitTrihalomethanes17%Colour: 4.6 mg/L Pt/Co, 23% of the 20 mg/L Pt/Co limitColour23%
  1. Colour23%
  2. Trihalomethanes17%
  3. Nitrite15%
  4. Fluoride7%
  5. Nitrate7%
  6. Turbidity7%
  7. Iron5%
  8. Mercury4%
  9. Nickel3%
  10. Copper3%
  11. Boron3%
  12. Aluminium3%
  13. Manganese2%
  14. Lead2%
  15. Arsenic1%
  16. Antimony<1%
  17. Selenium<1%
  18. Cadmium<1%
  19. Chromium<1%
  • Coliform Bacteria none found
  • Conductivity 130 µS/cm
  • E. coli none found
All 22 results as a table
SubstanceResultLegal limitShare of limit
Coliform Bacteria0 count/100mlMust be zeroNone found
Iron0.011 mg/L0.2 mg/L
5%
Manganese0.0011 mg/L0.05 mg/L
2%
Aluminium0.005 mg/L0.2 mg/L
3%
Turbidity0.27 NTU4 NTU
7%
Conductivity130 µS/cmNo legal limit–
E. coli0 count/100mlMust be zeroNone found
Colour4.6 mg/L Pt/Co20 mg/L Pt/Co
23%
Trihalomethanes0.017 mg/L0.1 mg/L
17%
Boron0.028 mg/L1 mg/L
3%
Antimony0.00004 mg/L0.005 mg/L
<1%
Selenium0.00023 mg/L0.04 mg/L
<1%
Chromium0.000094 mg/L0.05 mg/L
<1%
Cadmium0.000025 mg/L0.005 mg/L
<1%
Arsenic0.00011 mg/L0.01 mg/L
1%
Lead0.00016 mg/L0.01 mg/L
2%
Nickel0.00059 mg/L0.02 mg/L
3%
Mercury0.000042 mg/L0.001 mg/L
4%
Copper0.058 mg/L2 mg/L
3%
Fluoride0.11 mg/L1.5 mg/L
7%
Nitrate3.5 mg/L50 mg/L
7%
Nitrite0.074 mg/L0.5 mg/L
15%

SA3 in short

Tap water in SA3 (Swansea) is supplied by Dŵr Cymru Welsh Water and scores 9.6 out of 10, against an England and Wales average of 9.2. None of the 22 tested substances came close to a limit. The latest sample is from 23 December 2024.

  • 2nd cleanest of 7 areas tested in SwanseaOnly 1 area in Swansea scored higher. The best is SA1 on 9.6. Every area in Swansea
  • Nothing tested came within 40% of its legal limitThe highest was Colour at 23% of the 20 mg/L Pt/Co maximum. See every reading
  • Scores higher than 3 of 6 neighbouring districtsWater here is typical for the immediate area, which usually means the same treatment works and the same supply zone.

Questions about SA3 water

Is SA3 tap water safe to drink?

Based on the latest tests, SA3 (Swansea) water scores 9.6/10, which is safe. 0 of 22 tested contaminants exceeded recommended levels. Water is supplied by Dŵr Cymru Welsh Water.

What contaminants are in SA3 water?

We tested 22 contaminants in SA3 water. None exceeded recommended safe levels.

Who supplies water in SA3?

SA3 (Swansea) is supplied by Dŵr Cymru Welsh Water. You can view their full profile and compliance data on our supplier page.

Should I use a water filter in SA3?

SA3 water scored 9.6/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in SA3 water?

No PFAS (forever chemicals) result is attached to the tap-water tests for SA3, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.

Source: Dŵr Cymru Welsh Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from