Skip to main content
tapwater
England and Wales average 9.2

Tap water in CH8, FlintshireSafe to drink.Moderately soft.

Supplied by Dŵr Cymru Welsh Water. 901 samples, 23 substances, latest on 22 December 2024. Everything is inside the legal limit, and nothing comes close to it.

9.4 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

ZeroWater 10-Cup Jug

ZeroWater 10-Cup Jug

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

BRITA Marella XL + MAXTRA PRO

BRITA Marella XL + MAXTRA PRO

£25typical price

Basic chlorine and taste improvement on a budget

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if CH8’s water changes

We check for supply incidents every fifteen minutes. If one affects CH8, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for CH8

What's in a glass of CH8 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Trihalomethanes came closest to a limit, at 72% of it. 19 of 20 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitBromate: 3.1e-7 mg/L, <1% of the 0.01 mg/L limitBromate<1%Chromium: 0.00012 mg/L, <1% of the 0.05 mg/L limitChromium<1%Cadmium: 0.000025 mg/L, <1% of the 0.005 mg/L limitCadmium<1%Antimony: 0.000028 mg/L, <1% of the 0.005 mg/L limitAntimony<1%Selenium: 0.00023 mg/L, <1% of the 0.04 mg/L limitSelenium<1%Manganese: 0.00068 mg/L, 1% of the 0.05 mg/L limitManganese1%Arsenic: 0.00014 mg/L, 1% of the 0.01 mg/L limitArsenic1%Lead: 0.00016 mg/L, 2% of the 0.01 mg/L limitLead2%Nitrite: 0.013 mg/L, 3% of the 0.5 mg/L limitNitrite3%Boron: 0.028 mg/L, 3% of the 1 mg/L limitBoron3%Copper: 0.058 mg/L, 3% of the 2 mg/L limitCopper3%Nickel: 0.00059 mg/L, 3% of the 0.02 mg/L limitNickel3%Aluminium: 0.0081 mg/L, 4% of the 0.2 mg/L limitAluminium4%Mercury: 0.000042 mg/L, 4% of the 0.001 mg/L limitMercury4%Nitrate: 2.61 mg/L, 5% of the 50 mg/L limitNitrate5%Iron: 0.012 mg/L, 6% of the 0.2 mg/L limitIron6%Turbidity: 0.27 NTU, 7% of the 4 NTU limitTurbidity7%Fluoride: 0.11 mg/L, 7% of the 1.5 mg/L limitFluoride7%Colour: 4.6 mg/L Pt/Co, 23% of the 20 mg/L Pt/Co limitColour23%Trihalomethanes: 0.072 mg/L, 72% of the 0.1 mg/L limitTrihalomethanes72%
  1. Trihalomethanes72%
  2. Colour23%
  3. Fluoride7%
  4. Turbidity7%
  5. Iron6%
  6. Nitrate5%
  7. Mercury4%
  8. Aluminium4%
  9. Nickel3%
  10. Copper3%
  11. Boron3%
  12. Nitrite3%
  13. Lead2%
  14. Arsenic1%
  15. Manganese1%
  16. Selenium<1%
  17. Antimony<1%
  18. Cadmium<1%
  19. Chromium<1%
  20. Bromate<1%
  • E. coli none found
  • Coliform Bacteria none found
  • Conductivity 240 µS/cm
All 23 results as a table
SubstanceResultLegal limitShare of limit
E. coli0 count/100mlMust be zeroNone found
Coliform Bacteria0 count/100mlMust be zeroNone found
Manganese0.00068 mg/L0.05 mg/L
1%
Conductivity240 µS/cmNo legal limit–
Colour4.6 mg/L Pt/Co20 mg/L Pt/Co
23%
Aluminium0.0081 mg/L0.2 mg/L
4%
Turbidity0.27 NTU4 NTU
7%
Iron0.012 mg/L0.2 mg/L
6%
Trihalomethanes0.072 mg/L0.1 mg/L
72%
Boron0.028 mg/L1 mg/L
3%
Antimony0.000028 mg/L0.005 mg/L
<1%
Nickel0.00059 mg/L0.02 mg/L
3%
Mercury0.000042 mg/L0.001 mg/L
4%
Cadmium0.000025 mg/L0.005 mg/L
<1%
Selenium0.00023 mg/L0.04 mg/L
<1%
Lead0.00016 mg/L0.01 mg/L
2%
Chromium0.00012 mg/L0.05 mg/L
<1%
Fluoride0.11 mg/L1.5 mg/L
7%
Arsenic0.00014 mg/L0.01 mg/L
1%
Copper0.058 mg/L2 mg/L
3%
Nitrite0.013 mg/L0.5 mg/L
3%
Nitrate2.61 mg/L50 mg/L
5%
Bromate3.1e-7 mg/L0.01 mg/L
<1%

95mg of limescale minerals in every litre, typical for the CH area. CH8 has no reading of its own.

Soft water. Kind to kettles, boilers and skin

You will not need a softener here, and you will use less soap and detergent than most of England.

Soft400 mg/L
Within 10 km

5

forever-chemical detections in nearby rivers and groundwater

At 1 site. The highest was 6:2 FTSA at 0.0056 µg/L, at Caldy Golf Club Routine Groundwater Sample, 9.7 km away, in September 2026. These are river and borehole samples, not tests of your tap water.

Every PFAS sample around Liverpool · Which filters remove PFAS · PFAS explained

CH8 in short

Tap water in CH8 (Flintshire) is supplied by Dŵr Cymru Welsh Water and scores 9.4 out of 10, against an England and Wales average of 9.2. None of the 23 tested substances came close to a limit. The latest sample is from 22 December 2024.

  • The lowest score of the 5 areas tested in FlintshireCH8 scores 9.4 out of 10. The best in Flintshire, CH4, scores 9.4.
  • Trihalomethanes is the reading closest to its limit, at 72% of the 0.1 mg/L maximumIt passed with room to spare, and everything else tested sat further below its limit. See every reading
  • PFAS found at 1 monitoring site within 10 kmThose are river and groundwater samples, not tap water. The highest was 6:2 FTSA about 9.7 km away. What was measured

Questions about CH8 water

Is CH8 tap water safe to drink?

Based on the latest tests, CH8 (Flintshire) water scores 9.4/10, which is safe. 0 of 23 tested contaminants exceeded recommended levels. Water is supplied by Dŵr Cymru Welsh Water.

What contaminants are in CH8 water?

We tested 23 contaminants in CH8 water. None exceeded recommended safe levels. PFAS (forever chemicals) were also measured in rivers and groundwater within 10 km, though not in the tap-water tests themselves.

Who supplies water in CH8?

CH8 (Flintshire) is supplied by Dŵr Cymru Welsh Water. You can view their full profile and compliance data on our supplier page.

Is CH8 water hard or soft?

No hardness reading has been published for CH8 itself. Across the CH postcode area the typical value is 95 mg/L CaCO3, which is classified as moderately soft. This is a moderate hardness level.

Should I use a water filter in CH8?

CH8 water scored 9.4/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in CH8 water?

The tap-water tests we hold for CH8 do not include a PFAS result. Environment Agency monitoring found PFAS in 5 river and groundwater samples from 1 sites within 10 km of CH8, the highest being 6:2 FTSA at 0.0056 µg/L about 9.7 km away. These are environmental samples, not tests of tap water. The UK currently has no legal limit for PFAS in drinking water; the Drinking Water Inspectorate uses a 0.1 µg/L guideline for individual compounds. Reverse osmosis filters can reduce PFAS levels.

Keep reading

PFAS explainedHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near CH8

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
Iron2.7 mg/L0.2 mg/L
Lead0.00005 mg/L0.01 mg/L
Zinc0.082 mg/LNone
Nickel0.0045 mg/L0.02 mg/L
Manganese0.01 mg/L0.05 mg/L
Copper0.00064 mg/L2 mg/L
Dissolved Oxygen3.16 mg/LNone

Source: Dŵr Cymru Welsh Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from