Skip to main content
tapwater
England and Wales average 9.2

Tap water in HD3, KirkleesSafe to drink.Soft.

Supplied by Yorkshire Water. 1,705 samples, 25 substances, latest on 5 November 2026. Everything is inside the legal limit, and nothing comes close to it.

9.6 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

ZeroWater 10-Cup Jug

ZeroWater 10-Cup Jug

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

BRITA Marella XL + MAXTRA PRO

BRITA Marella XL + MAXTRA PRO

£25typical price

Basic chlorine and taste improvement on a budget

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if HD3’s water changes

We check for supply incidents every fifteen minutes. If one affects HD3, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for HD3

What's in a glass of HD3 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Trihalomethanes came closest to a limit, at 42% of it. 19 of 20 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitChromium: 0.00019 mg/L, <1% of the 0.05 mg/L limitChromium<1%Cadmium: 0.000031 mg/L, <1% of the 0.005 mg/L limitCadmium<1%Lead: 0.00009 mg/L, <1% of the 0.01 mg/L limitLead<1%Selenium: 0.00043 mg/L, 1% of the 0.04 mg/L limitSelenium1%Boron: 0.0119 mg/L, 1% of the 1 mg/L limitBoron1%Arsenic: 0.00013 mg/L, 1% of the 0.01 mg/L limitArsenic1%Copper: 0.0303 mg/L, 2% of the 2 mg/L limitCopper2%Nitrite: 0.008 mg/L, 2% of the 0.5 mg/L limitNitrite2%Antimony: 0.000084 mg/L, 2% of the 0.005 mg/L limitAntimony2%Manganese: 0.00101 mg/L, 2% of the 0.05 mg/L limitManganese2%Turbidity: 0.11 NTU, 3% of the 4 NTU limitTurbidity3%Bromate: 0.0003 mg/L, 3% of the 0.01 mg/L limitBromate3%Iron: 0.00629 mg/L, 3% of the 0.2 mg/L limitIron3%Fluoride: 0.05 mg/L, 3% of the 1.5 mg/L limitFluoride3%Mercury: 0.00004 mg/L, 4% of the 0.001 mg/L limitMercury4%Aluminium: 0.0111 mg/L, 6% of the 0.2 mg/L limitAluminium6%Nitrate: 3.73 mg/L, 7% of the 50 mg/L limitNitrate7%Colour: 2 mg/L Pt/Co, 10% of the 20 mg/L Pt/Co limitColour10%Nickel: 0.0025 mg/L, 13% of the 0.02 mg/L limitNickel13%Trihalomethanes: 0.0416 mg/L, 42% of the 0.1 mg/L limitTrihalomethanes42%
  1. Trihalomethanes42%
  2. Nickel13%
  3. Colour10%
  4. Nitrate7%
  5. Aluminium6%
  6. Mercury4%
  7. Fluoride3%
  8. Iron3%
  9. Bromate3%
  10. Turbidity3%
  11. Manganese2%
  12. Antimony2%
  13. Nitrite2%
  14. Copper2%
  15. Arsenic1%
  16. Boron1%
  17. Selenium1%
  18. Lead<1%
  19. Cadmium<1%
  20. Chromium<1%
  • Coliform Bacteria none found
  • E. coli none found
  • Conductivity 159 µS/cm
  • Phosphate 1.22 mg/L
All 25 results as a table
SubstanceResultLegal limitShare of limit
Coliform Bacteria0 count/100mlMust be zeroNone found
E. coli0 count/100mlMust be zeroNone found
Iron0.00629 mg/L0.2 mg/L
3%
Manganese0.00101 mg/L0.05 mg/L
2%
Colour2 mg/L Pt/Co20 mg/L Pt/Co
10%
Conductivity159 µS/cmNo legal limit–
Turbidity0.11 NTU4 NTU
3%
Aluminium0.0111 mg/L0.2 mg/L
6%
Phosphate1.22 mg/LNo legal limit–
Hardness (as CaCO3)56.7 mg/LNo legal limit–
Arsenic0.00013 mg/L0.01 mg/L
1%
Antimony0.000084 mg/L0.005 mg/L
2%
Selenium0.00043 mg/L0.04 mg/L
1%
Nickel0.0025 mg/L0.02 mg/L
13%
Chromium0.00019 mg/L0.05 mg/L
<1%
Nitrite0.008 mg/L0.5 mg/L
2%
Nitrate3.73 mg/L50 mg/L
7%
Lead0.00009 mg/L0.01 mg/L
<1%
Bromate0.0003 mg/L0.01 mg/L
3%
Fluoride0.05 mg/L1.5 mg/L
3%
Cadmium0.000031 mg/L0.005 mg/L
<1%
Boron0.0119 mg/L1 mg/L
1%
Trihalomethanes0.0416 mg/L0.1 mg/L
42%
Copper0.0303 mg/L2 mg/L
2%
Mercury0.00004 mg/L0.001 mg/L
4%

51mg of limescale minerals in every litre

Soft water. Kind to kettles, boilers and skin

You will not need a softener here, and you will use less soap and detergent than most of England.

Soft400 mg/L
Outside your tap

Your river is the Colne from Wessenden Brook to R Holme, rated moderate

The Environment Agency rated the Colne from Wessenden Brook to R Holme as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by insects and other small river life. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

Within 10 km

36

forever-chemical detections in nearby rivers and groundwater

At 4 sites. The highest was PFPeA at 0.24 µg/L, at Bradford Rd, Bailiff Bridge 2/27/12/098, 8.1 km away, in June 2025. These are river and borehole samples, not tests of your tap water.

Every PFAS sample around Huddersfield · Which filters remove PFAS · PFAS explained

HD3 in short

Tap water in HD3 (Kirklees) is supplied by Yorkshire Water and scores 9.6 out of 10, against an England and Wales average of 9.2. None of the 25 tested substances came close to a limit. The latest sample is from 5 November 2026.

  • 3rd cleanest of 15 areas tested in HuddersfieldOnly 2 areas in Huddersfield scored higher. The best is HD8 on 9.7. Every area in Huddersfield
  • Trihalomethanes is the reading closest to its limit, at 42% of the 0.1 mg/L maximumIt passed with room to spare, and everything else tested sat further below its limit. See every reading
  • Soft water at 51 mg/LLimescale is not a problem in HD3, so skip softeners and scale filters entirely. How hardness is measured

Questions about HD3 water

Is HD3 tap water safe to drink?

Based on the latest tests, HD3 (Kirklees) water scores 9.6/10, which is safe. 0 of 25 tested contaminants exceeded recommended levels. Water is supplied by Yorkshire Water.

What contaminants are in HD3 water?

We tested 25 contaminants in HD3 water. None exceeded recommended safe levels. PFAS (forever chemicals) were also measured in rivers and groundwater within 10 km, though not in the tap-water tests themselves.

Who supplies water in HD3?

HD3 (Kirklees) is supplied by Yorkshire Water. You can view their full profile and compliance data on our supplier page.

Is HD3 water hard or soft?

Water in HD3 (Kirklees) has a hardness of 51 mg/L CaCO3, which is classified as soft. Soft water is gentle on appliances and skin.

Should I use a water filter in HD3?

HD3 water scored 9.6/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in HD3 water?

The tap-water tests we hold for HD3 do not include a PFAS result. Environment Agency monitoring found PFAS in 36 river and groundwater samples from 4 sites within 10 km of HD3, the highest being PFPeA at 0.24 µg/L about 8.1 km away. These are environmental samples, not tests of tap water. The UK currently has no legal limit for PFAS in drinking water; the Drinking Water Inspectorate uses a 0.1 µg/L guideline for individual compounds. Reverse osmosis filters can reduce PFAS levels.

How clean is the river near HD3?

The Environment Agency rated the Colne from Wessenden Brook to R Holme as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by insects and other small river life. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in HD3, which is treated before it reaches homes.

Keep reading

PFAS explainedHow to test your waterBest water filtersFilter shower headsWater testing kitsAll of HuddersfieldUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near HD3

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
pH8.18 pHNone
Temperature9.1 °CNone
Conductivity358 µS/cmNone
Nitrate1.4 mg/L50 mg/L
Nitrite0.0067 mg/L0.5 mg/L
Dissolved Oxygen12.1 mg/LNone
Ammonia0.32 mg/L0.5 mg/L
Phosphate0.42 mg/LNone
Hardness (as CaCO3)75 mg/LNone
Copper0.00853 mg/L2 mg/L
Zinc0.0219 mg/LNone

Source: Yorkshire Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from