Skip to main content
tapwater
England and Wales average 9.2

Tap water in HX1, CalderdaleSafe to drink.Soft.

Supplied by Yorkshire Water. 2,325 samples, 25 substances, latest on 21 October 2026. Everything is inside the legal limit, and nothing comes close to it.

9.6 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

ZeroWater 10-Cup Jug

ZeroWater 10-Cup Jug

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

BRITA Marella XL + MAXTRA PRO

BRITA Marella XL + MAXTRA PRO

£25typical price

Basic chlorine and taste improvement on a budget

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if HX1’s water changes

We check for supply incidents every fifteen minutes. If one affects HX1, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for HX1

What's in a glass of HX1 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Trihalomethanes came closest to a limit, at 28% of it. 19 of 20 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitCopper: 0.0033 mg/L, <1% of the 2 mg/L limitCopper<1%Chromium: 0.00019 mg/L, <1% of the 0.05 mg/L limitChromium<1%Cadmium: 0.000031 mg/L, <1% of the 0.005 mg/L limitCadmium<1%Boron: 0.0083 mg/L, <1% of the 1 mg/L limitBoron<1%Lead: 0.00009 mg/L, <1% of the 0.01 mg/L limitLead<1%Selenium: 0.00043 mg/L, 1% of the 0.04 mg/L limitSelenium1%Arsenic: 0.00014 mg/L, 1% of the 0.01 mg/L limitArsenic1%Nitrite: 0.008 mg/L, 2% of the 0.5 mg/L limitNitrite2%Antimony: 0.000083 mg/L, 2% of the 0.005 mg/L limitAntimony2%Manganese: 0.00101 mg/L, 2% of the 0.05 mg/L limitManganese2%Turbidity: 0.11 NTU, 3% of the 4 NTU limitTurbidity3%Fluoride: 0.05 mg/L, 3% of the 1.5 mg/L limitFluoride3%Iron: 0.00788 mg/L, 4% of the 0.2 mg/L limitIron4%Mercury: 0.00004 mg/L, 4% of the 0.001 mg/L limitMercury4%Nickel: 0.00081 mg/L, 4% of the 0.02 mg/L limitNickel4%Aluminium: 0.0111 mg/L, 6% of the 0.2 mg/L limitAluminium6%Nitrate: 3.73 mg/L, 7% of the 50 mg/L limitNitrate7%Colour: 2 mg/L Pt/Co, 10% of the 20 mg/L Pt/Co limitColour10%Bromate: 0.0013 mg/L, 13% of the 0.01 mg/L limitBromate13%Trihalomethanes: 0.0282 mg/L, 28% of the 0.1 mg/L limitTrihalomethanes28%
  1. Trihalomethanes28%
  2. Bromate13%
  3. Colour10%
  4. Nitrate7%
  5. Aluminium6%
  6. Nickel4%
  7. Mercury4%
  8. Iron4%
  9. Fluoride3%
  10. Turbidity3%
  11. Manganese2%
  12. Antimony2%
  13. Nitrite2%
  14. Arsenic1%
  15. Selenium1%
  16. Lead<1%
  17. Boron<1%
  18. Cadmium<1%
  19. Chromium<1%
  20. Copper<1%
  • E. coli none found
  • Coliform Bacteria none found
  • Conductivity 125 µS/cm
  • Phosphate 1.02 mg/L
All 25 results as a table
SubstanceResultLegal limitShare of limit
E. coli0 count/100mlMust be zeroNone found
Coliform Bacteria0 count/100mlMust be zeroNone found
Iron0.00788 mg/L0.2 mg/L
4%
Manganese0.00101 mg/L0.05 mg/L
2%
Turbidity0.11 NTU4 NTU
3%
Aluminium0.0111 mg/L0.2 mg/L
6%
Colour2 mg/L Pt/Co20 mg/L Pt/Co
10%
Conductivity125 µS/cmNo legal limit–
Phosphate1.02 mg/LNo legal limit–
Mercury0.00004 mg/L0.001 mg/L
4%
Lead0.00009 mg/L0.01 mg/L
<1%
Trihalomethanes0.0282 mg/L0.1 mg/L
28%
Nitrite0.008 mg/L0.5 mg/L
2%
Nitrate3.73 mg/L50 mg/L
7%
Selenium0.00043 mg/L0.04 mg/L
1%
Arsenic0.00014 mg/L0.01 mg/L
1%
Antimony0.000083 mg/L0.005 mg/L
2%
Bromate0.0013 mg/L0.01 mg/L
13%
Copper0.0033 mg/L2 mg/L
<1%
Nickel0.00081 mg/L0.02 mg/L
4%
Chromium0.00019 mg/L0.05 mg/L
<1%
Cadmium0.000031 mg/L0.005 mg/L
<1%
Boron0.0083 mg/L1 mg/L
<1%
Fluoride0.05 mg/L1.5 mg/L
3%
Hardness (as CaCO3)43.2 mg/LNo legal limit–

50mg of limescale minerals in every litre

Soft water. Kind to kettles, boilers and skin

You will not need a softener here, and you will use less soap and detergent than most of England.

Soft400 mg/L
Outside your tap

Your river is the Hebble Brook from Source to River Calder, rated moderate

The Environment Agency rated the Hebble Brook from Source to River Calder as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by fish, insects and other small river life and dissolved oxygen. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

Within 10 km

127

forever-chemical detections in nearby rivers and groundwater

At 5 sites. The highest was PFPeA at 0.24 µg/L, at Bradford Rd, Bailiff Bridge 2/27/12/098, 6.2 km away, in June 2025. These are river and borehole samples, not tests of your tap water.

Every PFAS sample around Huddersfield · Which filters remove PFAS · PFAS explained

HX1 in short

Tap water in HX1 (Calderdale) is supplied by Yorkshire Water and scores 9.6 out of 10, against an England and Wales average of 9.2. None of the 25 tested substances came close to a limit. The latest sample is from 21 October 2026.

  • 2nd cleanest of 9 areas tested in CalderdaleOnly 1 area in Calderdale scored higher. The best is HD6 on 9.6.
  • Soft water at 50 mg/LLimescale is not a problem in HX1, so skip softeners and scale filters entirely. How hardness is measured
  • PFAS found at 5 monitoring sites within 10 kmThose are river and groundwater samples, not tap water. The highest was PFPeA about 6.2 km away. What was measured

Questions about HX1 water

Is HX1 tap water safe to drink?

Based on the latest tests, HX1 (Calderdale) water scores 9.6/10, which is safe. 0 of 25 tested contaminants exceeded recommended levels. Water is supplied by Yorkshire Water.

What contaminants are in HX1 water?

We tested 25 contaminants in HX1 water. None exceeded recommended safe levels. PFAS (forever chemicals) were also measured in rivers and groundwater within 10 km, though not in the tap-water tests themselves.

Who supplies water in HX1?

HX1 (Calderdale) is supplied by Yorkshire Water. You can view their full profile and compliance data on our supplier page.

Is HX1 water hard or soft?

Water in HX1 (Calderdale) has a hardness of 50 mg/L CaCO3, which is classified as soft. Soft water is gentle on appliances and skin.

Should I use a water filter in HX1?

HX1 water scored 9.6/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in HX1 water?

The tap-water tests we hold for HX1 do not include a PFAS result. Environment Agency monitoring found PFAS in 127 river and groundwater samples from 5 sites within 10 km of HX1, the highest being PFPeA at 0.24 µg/L about 6.2 km away. These are environmental samples, not tests of tap water. The UK currently has no legal limit for PFAS in drinking water; the Drinking Water Inspectorate uses a 0.1 µg/L guideline for individual compounds. Reverse osmosis filters can reduce PFAS levels.

How clean is the river near HX1?

The Environment Agency rated the Hebble Brook from Source to River Calder as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by fish, insects and other small river life and dissolved oxygen. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in HX1, which is treated before it reaches homes.

Keep reading

PFAS explainedHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near HX1

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
pH8.18 pHNone
Temperature9.1 °CNone
Conductivity358 µS/cmNone
Nitrate1.4 mg/L50 mg/L
Nitrite0.0067 mg/L0.5 mg/L
Dissolved Oxygen12.1 mg/LNone
Ammonia0.32 mg/L0.5 mg/L
Phosphate0.42 mg/LNone

Source: Yorkshire Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from