Skip to main content
tapwater
England and Wales average 9.2

Tap water in LS11, LeedsSafe to drink.Slightly hard.

Supplied by Yorkshire Water. 1,716 samples, 25 substances, latest on 6 November 2026. Everything is inside the legal limit, and nothing comes close to it.

9.5 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

ZeroWater 10-Cup Jug

ZeroWater 10-Cup Jug

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

BRITA Marella XL + MAXTRA PRO

BRITA Marella XL + MAXTRA PRO

£25typical price

Basic chlorine and taste improvement on a budget

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if LS11’s water changes

We check for supply incidents every fifteen minutes. If one affects LS11, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for LS11

What's in a glass of LS11 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Trihalomethanes came closest to a limit, at 33% of it. 19 of 20 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitChromium: 0.00019 mg/L, <1% of the 0.05 mg/L limitChromium<1%Cadmium: 0.000031 mg/L, <1% of the 0.005 mg/L limitCadmium<1%Selenium: 0.00043 mg/L, 1% of the 0.04 mg/L limitSelenium1%Nitrite: 0.008 mg/L, 2% of the 0.5 mg/L limitNitrite2%Boron: 0.0199 mg/L, 2% of the 1 mg/L limitBoron2%Arsenic: 0.0002 mg/L, 2% of the 0.01 mg/L limitArsenic2%Manganese: 0.00101 mg/L, 2% of the 0.05 mg/L limitManganese2%Turbidity: 0.11 NTU, 3% of the 4 NTU limitTurbidity3%Antimony: 0.000168 mg/L, 3% of the 0.005 mg/L limitAntimony3%Mercury: 0.00004 mg/L, 4% of the 0.001 mg/L limitMercury4%Copper: 0.103 mg/L, 5% of the 2 mg/L limitCopper5%Lead: 0.00052 mg/L, 5% of the 0.01 mg/L limitLead5%Aluminium: 0.0111 mg/L, 6% of the 0.2 mg/L limitAluminium6%Fluoride: 0.09 mg/L, 6% of the 1.5 mg/L limitFluoride6%Nickel: 0.0013 mg/L, 7% of the 0.02 mg/L limitNickel7%Iron: 0.0135 mg/L, 7% of the 0.2 mg/L limitIron7%Bromate: 0.0007 mg/L, 7% of the 0.01 mg/L limitBromate7%Nitrate: 4.63 mg/L, 9% of the 50 mg/L limitNitrate9%Colour: 2 mg/L Pt/Co, 10% of the 20 mg/L Pt/Co limitColour10%Trihalomethanes: 0.0331 mg/L, 33% of the 0.1 mg/L limitTrihalomethanes33%
  1. Trihalomethanes33%
  2. Colour10%
  3. Nitrate9%
  4. Bromate7%
  5. Iron7%
  6. Nickel7%
  7. Fluoride6%
  8. Aluminium6%
  9. Lead5%
  10. Copper5%
  11. Mercury4%
  12. Antimony3%
  13. Turbidity3%
  14. Manganese2%
  15. Arsenic2%
  16. Boron2%
  17. Nitrite2%
  18. Selenium1%
  19. Cadmium<1%
  20. Chromium<1%
  • E. coli none found
  • Conductivity 383 µS/cm
  • Coliform Bacteria none found
  • Phosphate 1.09 mg/L
All 25 results as a table
SubstanceResultLegal limitShare of limit
Nitrite0.008 mg/L0.5 mg/L
2%
Nitrate4.63 mg/L50 mg/L
9%
Mercury0.00004 mg/L0.001 mg/L
4%
Antimony0.000168 mg/L0.005 mg/L
3%
Selenium0.00043 mg/L0.04 mg/L
1%
Arsenic0.0002 mg/L0.01 mg/L
2%
Fluoride0.09 mg/L1.5 mg/L
6%
Copper0.103 mg/L2 mg/L
5%
E. coli0 count/100mlMust be zeroNone found
Trihalomethanes0.0331 mg/L0.1 mg/L
33%
Lead0.00052 mg/L0.01 mg/L
5%
Turbidity0.11 NTU4 NTU
3%
Conductivity383 µS/cmNo legal limit–
Colour2 mg/L Pt/Co20 mg/L Pt/Co
10%
Bromate0.0007 mg/L0.01 mg/L
7%
Aluminium0.0111 mg/L0.2 mg/L
6%
Iron0.0135 mg/L0.2 mg/L
7%
Boron0.0199 mg/L1 mg/L
2%
Nickel0.0013 mg/L0.02 mg/L
7%
Chromium0.00019 mg/L0.05 mg/L
<1%
Cadmium0.000031 mg/L0.005 mg/L
<1%
Manganese0.00101 mg/L0.05 mg/L
2%
Coliform Bacteria0 count/100mlMust be zeroNone found
Phosphate1.09 mg/LNo legal limit–
Hardness (as CaCO3)154 mg/LNo legal limit–

142mg of limescale minerals in every litre

Middling hardness. Some scale, slowly

Below the point where a softener pays for itself. Descaling the kettle now and then is all most homes need.

Soft400 mg/L
Outside your tap

Your river is the Aire from Gill Beck (Baildon) to Wyke Beck, rated moderate

The Environment Agency rated the Aire from Gill Beck (Baildon) to Wyke Beck as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by phosphate, insects and other small river life and specific pollutants. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

Within 10 km

47

forever-chemical detections in nearby rivers and groundwater

At 4 sites. The highest was PFOA at 0.043 µg/L, at Adel Beck at Adel Mill Bridge, 9.7 km away, in May 2024. These are river and borehole samples, not tests of your tap water.

Every PFAS sample around Leeds · Which filters remove PFAS · PFAS explained

LS11 in short

Tap water in LS11 (Leeds) is supplied by Yorkshire Water and scores 9.5 out of 10, against an England and Wales average of 9.2. None of the 25 tested substances came close to a limit. The latest sample is from 6 November 2026.

  • 12th cleanest of 28 areas tested in LeedsSquarely mid-table for Leeds, between LS19 on 9.7 and LS25 on 9.1. Every area in Leeds
  • PFAS found at 4 monitoring sites within 10 kmThose are river and groundwater samples, not tap water. The highest was PFOA about 9.7 km away. What was measured
  • Nothing tested came within 40% of its legal limitThe highest was Trihalomethanes at 33% of the 0.1 mg/L maximum. See every reading

Questions about LS11 water

Is LS11 tap water safe to drink?

Based on the latest tests, LS11 (Leeds) water scores 9.5/10, which is safe. 0 of 25 tested contaminants exceeded recommended levels. Water is supplied by Yorkshire Water.

What contaminants are in LS11 water?

We tested 25 contaminants in LS11 water. None exceeded recommended safe levels. PFAS (forever chemicals) were also measured in rivers and groundwater within 10 km, though not in the tap-water tests themselves.

Who supplies water in LS11?

LS11 (Leeds) is supplied by Yorkshire Water. You can view their full profile and compliance data on our supplier page.

Is LS11 water hard or soft?

Water in LS11 (Leeds) has a hardness of 142 mg/L CaCO3, which is classified as moderately hard. This is a moderate hardness level.

Should I use a water filter in LS11?

LS11 water scored 9.5/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in LS11 water?

The tap-water tests we hold for LS11 do not include a PFAS result. Environment Agency monitoring found PFAS in 47 river and groundwater samples from 4 sites within 10 km of LS11, the highest being PFOA at 0.043 µg/L about 9.7 km away. These are environmental samples, not tests of tap water. The UK currently has no legal limit for PFAS in drinking water; the Drinking Water Inspectorate uses a 0.1 µg/L guideline for individual compounds. Reverse osmosis filters can reduce PFAS levels.

How clean is the river near LS11?

The Environment Agency rated the Aire from Gill Beck (Baildon) to Wyke Beck as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by phosphate, insects and other small river life and specific pollutants. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in LS11, which is treated before it reaches homes.

Keep reading

PFAS explainedHow to test your waterBest water filtersFilter shower headsWater testing kitsAll of LeedsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near LS11

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
Turbidity12 NTU4 NTU
Manganese0.287 mg/L0.05 mg/L
Iron0.908 mg/L0.2 mg/L
Ammonia0.25 mg/L0.5 mg/L
Nitrate0.77 mg/L50 mg/L
Phosphate0.017 mg/LNone
pH8.26 pHNone
Temperature5.3 °CNone
Conductivity903 µS/cmNone
Nitrite0.022 mg/L0.5 mg/L
Dissolved Oxygen12.1 mg/LNone
Hardness (as CaCO3)126 mg/LNone
Copper0.00255 mg/L2 mg/L
Zinc0.0235 mg/LNone

Source: Yorkshire Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from