Skip to main content
tapwater
England and Wales average 9.0

Tap water in WF2, WakefieldSafe to drink.Moderately soft.

Supplied by Yorkshire Water. 1,938 samples, 25 substances, latest on 28 September 2026. Everything is inside the legal limit, and nothing comes close to it.

See the filter we recommendSee everything that was tested

9.5 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

ZeroWater 12-Cup Ready-Pour

ZeroWater 12-Cup Ready-Pour

£40typical price

Households concerned about PFAS and heavy metals

Check price at Amazon (opens in new tab)
Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

Check price at Waterdrop (opens in new tab)
BRITA Marella XL + MAXTRA PRO

BRITA Marella XL + MAXTRA PRO

£25typical price

Basic chlorine and taste improvement on a budget

Check price at Amazon (opens in new tab)

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

What's in a glass of WF2 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Trihalomethanes came closest to a limit, at 65% of it. 19 of 20 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitChromium: 0.00019 mg/L, <1% of the 0.05 mg/L limitChromium<1%Copper: 0.00878 mg/L, <1% of the 2 mg/L limitCopper<1%Cadmium: 0.000031 mg/L, <1% of the 0.005 mg/L limitCadmium<1%Lead: 0.00009 mg/L, <1% of the 0.01 mg/L limitLead<1%Boron: 0.0091 mg/L, <1% of the 1 mg/L limitBoron<1%Selenium: 0.00043 mg/L, 1% of the 0.04 mg/L limitSelenium1%Nitrite: 0.008 mg/L, 2% of the 0.5 mg/L limitNitrite2%Antimony: 0.000098 mg/L, 2% of the 0.005 mg/L limitAntimony2%Arsenic: 0.0002 mg/L, 2% of the 0.01 mg/L limitArsenic2%Manganese: 0.00101 mg/L, 2% of the 0.05 mg/L limitManganese2%Turbidity: 0.11 NTU, 3% of the 4 NTU limitTurbidity3%Fluoride: 0.05 mg/L, 3% of the 1.5 mg/L limitFluoride3%Iron: 0.00704 mg/L, 4% of the 0.2 mg/L limitIron4%Bromate: 0.0004 mg/L, 4% of the 0.01 mg/L limitBromate4%Mercury: 0.00004 mg/L, 4% of the 0.001 mg/L limitMercury4%Aluminium: 0.0111 mg/L, 6% of the 0.2 mg/L limitAluminium6%Nitrate: 3.73 mg/L, 7% of the 50 mg/L limitNitrate7%Nickel: 0.00217 mg/L, 11% of the 0.02 mg/L limitNickel11%Colour: 3 mg/L Pt/Co, 15% of the 20 mg/L Pt/Co limitColour15%Trihalomethanes: 0.0648 mg/L, 65% of the 0.1 mg/L limitTrihalomethanes65%
  1. Trihalomethanes65%
  2. Colour15%
  3. Nickel11%
  4. Nitrate7%
  5. Aluminium6%
  6. Bromate4%
  7. Mercury4%
  8. Iron4%
  9. Fluoride3%
  10. Turbidity3%
  11. Manganese2%
  12. Arsenic2%
  13. Antimony2%
  14. Nitrite2%
  15. Selenium1%
  16. Boron<1%
  17. Lead<1%
  18. Cadmium<1%
  19. Copper<1%
  20. Chromium<1%
  • E. coli none found
  • Coliform Bacteria none found
  • Conductivity 163 µS/cm
  • Phosphate 0.931 mg/L
All 25 results as a table
SubstanceResultLegal limitShare of limit
E. coli0 count/100mlMust be zeroNone found
Coliform Bacteria0 count/100mlMust be zeroNone found
Aluminium0.0111 mg/L0.2 mg/L
6%
Turbidity0.11 NTU4 NTU
3%
Iron0.00704 mg/L0.2 mg/L
4%
Manganese0.00101 mg/L0.05 mg/L
2%
Conductivity163 µS/cmNo legal limit–
Colour3 mg/L Pt/Co20 mg/L Pt/Co
15%
Phosphate0.931 mg/LNo legal limit–
Lead0.00009 mg/L0.01 mg/L
<1%
Nitrite0.008 mg/L0.5 mg/L
2%
Nitrate3.73 mg/L50 mg/L
7%
Bromate0.0004 mg/L0.01 mg/L
4%
Cadmium0.000031 mg/L0.005 mg/L
<1%
Boron0.0091 mg/L1 mg/L
<1%
Nickel0.00217 mg/L0.02 mg/L
11%
Trihalomethanes0.0648 mg/L0.1 mg/L
65%
Copper0.00878 mg/L2 mg/L
<1%
Chromium0.00019 mg/L0.05 mg/L
<1%
Fluoride0.05 mg/L1.5 mg/L
3%
Antimony0.000098 mg/L0.005 mg/L
2%
Selenium0.00043 mg/L0.04 mg/L
1%
Arsenic0.0002 mg/L0.01 mg/L
2%
Mercury0.00004 mg/L0.001 mg/L
4%
Hardness (as CaCO3)44 mg/LNo legal limit–

118mg of limescale minerals in every litre

Soft water. Kind to kettles, boilers and skin

You will not need a softener here, and you will use less soap and detergent than most of England.

Soft400 mg/L
Outside your tap

Your river is the Calder from River Colne to River Chald, rated moderate

The Environment Agency rated the Calder from River Colne to River Chald as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by phosphate, fish and insects and other small river life. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

Within 10 km

80

forever-chemical detections in nearby rivers and groundwater

At 5 sites. The highest was PFBS at 0.047 µg/L, at SSN1573 Ossett Dike Trib of Lupset Beck, 2.5 km away, in December 2025. These are river and borehole samples, not tests of your tap water.

Every PFAS sample around Leeds · Which filters remove PFAS · PFAS explained

WF2 in short

Tap water in WF2 (Wakefield) is supplied by Yorkshire Water in the Wakefield Central zone and scores 9.5 out of 10, against an England and Wales average of 9.0. None of the 25 tested substances came close to a limit. The latest sample is from 28 September 2026.

  • The cleanest tap water of the 11 areas tested in WakefieldWF2 scores 9.5 out of 10, ahead of WF3 in second place on 9.5.
  • Trihalomethanes is the reading closest to its limit, at 65% of the 0.1 mg/L maximumIt passed with room to spare, and everything else tested sat further below its limit. See every reading
  • PFAS found at 5 monitoring sites within 10 kmThose are river and groundwater samples, not tap water. The highest was PFBS about 2.5 km away. What was measured

Next door

WF59.2 out of 10 · 137 mg/LWF109.0 out of 10 · 293 mg/LWF49.2 out of 10 · 119 mg/LWF19.4 out of 10 · 195 mg/LWF69.1 out of 10 · 211 mg/LWF78.3 out of 10 · 282 mg/LWF88.8 out of 10 · 272 mg/LWF39.5 out of 10 · 139 mg/LWF99.1 out of 10 · 283 mg/LWF119.1 out of 10 · 286 mg/L

Questions about WF2 water

Is WF2 tap water safe to drink?

Based on the latest tests, WF2 (Wakefield) water scores 9.5/10, which is safe. 0 of 25 tested contaminants exceeded recommended levels. Water is supplied by Yorkshire Water.

What contaminants are in WF2 water?

We tested 25 contaminants in WF2 water. None exceeded recommended safe levels. PFAS (forever chemicals) were also measured in rivers and groundwater within 10 km, though not in the tap-water tests themselves.

Who supplies water in WF2?

WF2 (Wakefield) is supplied by Yorkshire Water. You can view their full profile and compliance data on our supplier page.

Is WF2 water hard or soft?

Water in WF2 (Wakefield) has a hardness of 118 mg/L CaCO3, which is classified as moderately soft. This is a moderate hardness level.

Should I use a water filter in WF2?

WF2 water scored 9.5/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in WF2 water?

The tap-water tests we hold for WF2 do not include a PFAS result. Environment Agency monitoring found PFAS in 80 river and groundwater samples from 5 sites within 10 km of WF2, the highest being PFBS at 0.047 µg/L about 2.5 km away. These are environmental samples, not tests of tap water. The UK currently has no legal limit for PFAS in drinking water; the Drinking Water Inspectorate uses a 0.1 µg/L guideline for individual compounds. Reverse osmosis filters can reduce PFAS levels.

How clean is the river near WF2?

The Environment Agency rated the Calder from River Colne to River Chald as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by phosphate, fish and insects and other small river life. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in WF2, which is treated before it reaches homes.

Keep reading

PFAS explainedHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near WF2

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
Iron3.48 mg/L0.2 mg/L
pH7.96 pHNone
Temperature15.3 °CNone
Conductivity997 µS/cmNone
Nitrate2.05 mg/L50 mg/L
Nitrite0.0272 mg/L0.5 mg/L
Phosphate0.062 mg/LNone
Dissolved Oxygen9.53 mg/LNone
Ammonia0.129 mg/L0.5 mg/L
Hardness (as CaCO3)377 mg/LNone

Get alerts for your area

We'll email you when water quality data changes for WF2.

Source: Yorkshire Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from