272mg of limescale minerals in every litre, the median across IG districts
Is Ilford a hard water area?
Yes. Tap water across the IG postcode area is very hard, the top band on the scale water companies use, with a median of 272 mg/L calcium carbonate. It ranges from 261 mg/L in IG2 to 285 mg/L in IG3, from 7 districts with their own water company reading and 4 estimated from the area.
- Soft
- 0 to 60 mg/L
- Moderately soft
- 60 to 120 mg/L
- Slightly hard
- 120 to 180 mg/L
- Hard
- 180 to 200 mg/L
- Very hard
- 200 to 400 mg/L
Hardness by IG district
Hardest first. Hard starts at 180 mg/L, very hard at 250. Districts marked with an asterisk take the area's median rather than a reading of their own.
| District | Area | mg/L | Hardness |
|---|---|---|---|
| IG3 | Redbridge | 285 | very hard |
| IG1 | Redbridge | 285 | very hard |
| IG11 | Barking and Dagenham | 278 | very hard |
| IG7* | Redbridge | 272 | very hard |
| IG8* | Redbridge | 272 | very hard |
| IG4 | Redbridge | 272 | very hard |
| IG10* | Epping Forest | 272 | very hard |
| IG9* | Epping Forest | 272 | very hard |
| IG6 | Redbridge | 270 | very hard |
| IG5 | Redbridge | 268 | very hard |
| IG2 | Redbridge | 261 | very hard |
What to do about it
Hard water: compare softener quotes
At 272 mg/L most IG homes get their money back on a softener within a few years. A filter will not touch limescale; only a softener does.
- Free quotes
- Local installers
- No obligation
Check your own district first
The area figure is a median. Your district can sit anywhere between 261 and 285 mg/L.
Softener quotes for Ilford
At 272 mg/L most IG homes get their money back on a softener within a few years. Free quotes from installers covering your postcode.
Request a free assessment and we'll come back to you with local installer options for your area.
100%
free, no obligation
shared only with your consent
Before you buy
- Do I need a water softener?The hardness bands, the symptoms, and when the answer is no
- Best water softener UKHarvey, Kinetico, BWT, Monarch and Water2Buy compared
- Water softener costUnit, fitting and salt, and how long the payback takes
- Installation explainedWhere it goes, the bypass tap, the drain, DIY or plumber
- Harvey vs KineticoThe two premium twin-cylinder brands, side by side
- Softener salt guideTablet, block or granular, and how much you get through
- Salt-free softenersConditioners and electronic descalers, honestly assessed
Questions about Ilford water
Is Ilford a hard water area?
Yes. The median hardness across IG postcode districts is 272 mg/L calcium carbonate, which is very hard. 100% of the 11 districts we hold readings for are hard or very hard (180 mg/L and above).
What is the water hardness in Ilford?
Between 261 and 285 mg/L depending on the district, with a median of 272. The hardest measured district is IG3 at 285 mg/L and the softest is IG2 at 261. Figures come from water company drinking-water tests, with postcode-area estimates for districts that have no reading of their own.
Do I need a water softener in Ilford?
In most IG homes a softener pays for itself: at 272 mg/L kettles, boilers and showers scale up quickly. Check your own district first, because hardness varies from 261 to 285 within the area.
Hardness as mg/L calcium carbonate from water company drinking-water tests and postcode checkers. See the UK hardness map for every area.