Skip to main content
tapwater
England and Wales average 9.2

Tap water in IG11, Barking and DagenhamSafe to drink.Very hard.

Supplied by Essex & Suffolk Water. 4,387 samples, 21 substances, latest on 19 December 2025. Everything is inside the legal limit. One result, nickel, sits close to the line.

8.6 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 293 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

Waterdrop G3P600 Reverse Osmosis

Waterdrop G3P600 Reverse Osmosis

£550typical price

Removes nickel, the result that stood out in IG11.

BRITA Marella XL + MAXTRA PRO

BRITA Marella XL + MAXTRA PRO

£25typical price

Basic chlorine and taste improvement on a budget

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if IG11’s water changes

We check for supply incidents every fifteen minutes. If one affects IG11, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for IG11

What's in a glass of IG11 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nickel came closest to a limit, at 100% of it. 17 of 19 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitCopper: 0.0052 mg/L, <1% of the 2 mg/L limitCopper<1%Cadmium: 0.000018 mg/L, <1% of the 0.005 mg/L limitCadmium<1%Manganese: 0.00028 mg/L, <1% of the 0.05 mg/L limitManganese<1%Chromium: 0.00067 mg/L, 1% of the 0.05 mg/L limitChromium1%Nitrite: 0.0099 mg/L, 2% of the 0.5 mg/L limitNitrite2%Selenium: 0.00083 mg/L, 2% of the 0.04 mg/L limitSelenium2%Mercury: 0.000022 mg/L, 2% of the 0.001 mg/L limitMercury2%Lead: 0.00024 mg/L, 2% of the 0.01 mg/L limitLead2%Iron: 0.0083 mg/L, 4% of the 0.2 mg/L limitIron4%Aluminium: 0.012 mg/L, 6% of the 0.2 mg/L limitAluminium6%Boron: 0.066 mg/L, 7% of the 1 mg/L limitBoron7%Colour: 1.5 mg/L Pt/Co, 8% of the 20 mg/L Pt/Co limitColour8%Turbidity: 0.34 NTU, 9% of the 4 NTU limitTurbidity9%Antimony: 0.00043 mg/L, 9% of the 0.005 mg/L limitAntimony9%Arsenic: 0.0012 mg/L, 12% of the 0.01 mg/L limitArsenic12%Fluoride: 0.2 mg/L, 13% of the 1.5 mg/L limitFluoride13%Bromate: 0.0017 mg/L, 17% of the 0.01 mg/L limitBromate17%Nitrate: 27 mg/L, 54% of the 50 mg/L limitNitrate54%Nickel: 0.02 mg/L, 100% of the 0.02 mg/L limitNickel100%
  1. Nickel100%
  2. Nitrate54%
  3. Bromate17%
  4. Fluoride13%
  5. Arsenic12%
  6. Antimony9%
  7. Turbidity9%
  8. Colour8%
  9. Boron7%
  10. Aluminium6%
  11. Iron4%
  12. Lead2%
  13. Mercury2%
  14. Selenium2%
  15. Nitrite2%
  16. Chromium1%
  17. Manganese<1%
  18. Cadmium<1%
  19. Copper<1%
  • Conductivity 690 µS/cm
  • pH 7.7 pH
All 21 results as a table
SubstanceResultLegal limitShare of limit
Nickel0.02 mg/L0.02 mg/L
100%
Nitrate27 mg/L50 mg/L
54%
Conductivity690 µS/cmNo legal limit–
Nitrite0.0099 mg/L0.5 mg/L
2%
Turbidity0.34 NTU4 NTU
9%
pH7.7 pHNo legal limit–
Aluminium0.012 mg/L0.2 mg/L
6%
Colour1.5 mg/L Pt/Co20 mg/L Pt/Co
8%
Iron0.0083 mg/L0.2 mg/L
4%
Manganese0.00028 mg/L0.05 mg/L
<1%
Selenium0.00083 mg/L0.04 mg/L
2%
Copper0.0052 mg/L2 mg/L
<1%
Antimony0.00043 mg/L0.005 mg/L
9%
Chromium0.00067 mg/L0.05 mg/L
1%
Bromate0.0017 mg/L0.01 mg/L
17%
Lead0.00024 mg/L0.01 mg/L
2%
Arsenic0.0012 mg/L0.01 mg/L
12%
Cadmium0.000018 mg/L0.005 mg/L
<1%
Boron0.066 mg/L1 mg/L
7%
Fluoride0.2 mg/L1.5 mg/L
13%
Mercury0.000022 mg/L0.001 mg/L
2%

293mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Over 200 mg/L, the building regulations guidance for England counts this as a hard water area: a new combination boiler or water heater should have limescale protection. The 200 ppm rule

Softener quotes for IG11

Leave your details and we will email you when we can match you with installers who cover IG11. No obligation.

A fitted softener typically costs £1,195 to £2,900. Prices by brand, with sources. Request a free assessment and we'll come back to you with local installer options for your area.

IG11— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Mayes Brook, rated moderate

The Environment Agency rated the Mayes Brook as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by fish, insects and other small river life and dissolved oxygen. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

Within 10 km

500

forever-chemical detections in nearby rivers and groundwater

At 3 sites. The highest was 6:2 FtSAB at 0.016 µg/L, at Lee at Carpenters Rd, 7.6 km away, in January 2026. These are river and borehole samples, not tests of your tap water.

Every PFAS sample around London · Which filters remove PFAS · PFAS explained

IG11 in short

Tap water in IG11 (Barking and Dagenham) is supplied by Essex & Suffolk Water and scores 8.6 out of 10, against an England and Wales average of 9.2. 1 of 21 tested substances was close to or over a limit. The latest sample is from 19 December 2025.

  • Nickel is within its legal limit but flagged, at 100% of the 0.02 mg/L maximumAnything over three quarters of a limit is flagged here as worth watching. It has not gone over. See every reading
  • The lowest score of the 4 areas tested in Barking and DagenhamIG11 scores 8.6 out of 10. The best in Barking and Dagenham, RM10, scores 9.
  • Very hard water at 293 mg/LThe threshold for very hard is 250 mg/L. Expect visible limescale on taps and in kettles in IG11. How hardness is measured

Questions about IG11 water

Is IG11 tap water safe to drink?

Based on the latest tests, IG11 (Barking and Dagenham) water scores 8.6/10, which is safe. 1 of 21 tested contaminants exceeded recommended levels. Water is supplied by Essex & Suffolk Water.

What contaminants are in IG11 water?

We tested 21 contaminants in IG11 water. 1 were flagged, including Nickel. PFAS (forever chemicals) were also measured in rivers and groundwater within 10 km, though not in the tap-water tests themselves.

Who supplies water in IG11?

IG11 (Barking and Dagenham) is supplied by Essex & Suffolk Water. You can view their full profile and compliance data on our supplier page.

Is IG11 water hard or soft?

Water in IG11 (Barking and Dagenham) has a hardness of 293 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in IG11?

With 1 contaminant above recommended levels in IG11, a water filter could help. A reverse osmosis or activated carbon filter is recommended for PFAS removal. See our filter recommendations for your area.

Are there PFAS forever chemicals in IG11 water?

The tap-water tests we hold for IG11 do not include a PFAS result. Environment Agency monitoring found PFAS in 500 river and groundwater samples from 3 sites within 10 km of IG11, the highest being 6:2 FtSAB at 0.016 µg/L about 7.6 km away. These are environmental samples, not tests of tap water. The UK currently has no legal limit for PFAS in drinking water; the Drinking Water Inspectorate uses a 0.1 µg/L guideline for individual compounds. Reverse osmosis filters can reduce PFAS levels.

How clean is the river near IG11?

The Environment Agency rated the Mayes Brook as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by fish, insects and other small river life and dissolved oxygen. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in IG11, which is treated before it reaches homes.

Keep reading

PFAS explainedBoiling water taps and hard waterHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near IG11

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
pH7.86 pHNone
Temperature10.1 °CNone
Conductivity723 µS/cmNone
Ammonia0.19 mg/L0.5 mg/L
Nitrate0.52 mg/L50 mg/L
Nitrite0.035 mg/L0.5 mg/L
Phosphate0.28 mg/LNone
Dissolved Oxygen7.81 mg/LNone
Iron0.0509 mg/L0.2 mg/L
Zinc0.000833 mg/LNone
Copper0.000305 mg/L2 mg/L

Source: Essex & Suffolk Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from