Skip to main content
tapwater
England and Wales average 9.2

Tap water in RM9, Barking and DagenhamSafe to drink.Very hard.

Supplied by Essex & Suffolk Water. 6,551 samples, 21 substances, latest on 19 December 2025. Everything is inside the legal limit, and nothing comes close to it.

9.0 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 298 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 10-Cup Jug

ZeroWater 10-Cup Jug

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if RM9’s water changes

We check for supply incidents every fifteen minutes. If one affects RM9, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for RM9

What's in a glass of RM9 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrate came closest to a limit, at 58% of it. 17 of 19 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitCadmium: 0.000018 mg/L, <1% of the 0.005 mg/L limitCadmium<1%Manganese: 0.00028 mg/L, <1% of the 0.05 mg/L limitManganese<1%Nitrite: 0.0061 mg/L, 1% of the 0.5 mg/L limitNitrite1%Chromium: 0.00085 mg/L, 2% of the 0.05 mg/L limitChromium2%Lead: 0.00018 mg/L, 2% of the 0.01 mg/L limitLead2%Selenium: 0.00086 mg/L, 2% of the 0.04 mg/L limitSelenium2%Mercury: 0.000022 mg/L, 2% of the 0.001 mg/L limitMercury2%Turbidity: 0.09 NTU, 2% of the 4 NTU limitTurbidity2%Iron: 0.0052 mg/L, 3% of the 0.2 mg/L limitIron3%Aluminium: 0.012 mg/L, 6% of the 0.2 mg/L limitAluminium6%Boron: 0.063 mg/L, 6% of the 1 mg/L limitBoron6%Arsenic: 0.00074 mg/L, 7% of the 0.01 mg/L limitArsenic7%Colour: 1.5 mg/L Pt/Co, 8% of the 20 mg/L Pt/Co limitColour8%Antimony: 0.00049 mg/L, 10% of the 0.005 mg/L limitAntimony10%Fluoride: 0.17 mg/L, 11% of the 1.5 mg/L limitFluoride11%Nickel: 0.0024 mg/L, 12% of the 0.02 mg/L limitNickel12%Copper: 0.28 mg/L, 14% of the 2 mg/L limitCopper14%Bromate: 0.0039 mg/L, 39% of the 0.01 mg/L limitBromate39%Nitrate: 29 mg/L, 58% of the 50 mg/L limitNitrate58%
  1. Nitrate58%
  2. Bromate39%
  3. Copper14%
  4. Nickel12%
  5. Fluoride11%
  6. Antimony10%
  7. Colour8%
  8. Arsenic7%
  9. Boron6%
  10. Aluminium6%
  11. Iron3%
  12. Turbidity2%
  13. Mercury2%
  14. Selenium2%
  15. Lead2%
  16. Chromium2%
  17. Nitrite1%
  18. Manganese<1%
  19. Cadmium<1%
  • Conductivity 630 µS/cm
  • pH 7.8 pH
All 21 results as a table
SubstanceResultLegal limitShare of limit
Nitrate29 mg/L50 mg/L
58%
Conductivity630 µS/cmNo legal limit–
Nitrite0.0061 mg/L0.5 mg/L
1%
Turbidity0.09 NTU4 NTU
2%
pH7.8 pHNo legal limit–
Aluminium0.012 mg/L0.2 mg/L
6%
Colour1.5 mg/L Pt/Co20 mg/L Pt/Co
8%
Iron0.0052 mg/L0.2 mg/L
3%
Manganese0.00028 mg/L0.05 mg/L
<1%
Selenium0.00086 mg/L0.04 mg/L
2%
Copper0.28 mg/L2 mg/L
14%
Antimony0.00049 mg/L0.005 mg/L
10%
Chromium0.00085 mg/L0.05 mg/L
2%
Bromate0.0039 mg/L0.01 mg/L
39%
Lead0.00018 mg/L0.01 mg/L
2%
Arsenic0.00074 mg/L0.01 mg/L
7%
Nickel0.0024 mg/L0.02 mg/L
12%
Cadmium0.000018 mg/L0.005 mg/L
<1%
Boron0.063 mg/L1 mg/L
6%
Fluoride0.17 mg/L1.5 mg/L
11%
Mercury0.000022 mg/L0.001 mg/L
2%

298mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Over 200 mg/L, the building regulations guidance for England counts this as a hard water area: a new combination boiler or water heater should have limescale protection. The 200 ppm rule

Softener quotes for RM9

Leave your details and we will email you when we can match you with installers who cover RM9. No obligation.

A fitted softener typically costs £1,195 to £2,900. Prices by brand, with sources. Request a free assessment and we'll come back to you with local installer options for your area.

RM9— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Gores Brook, rated moderate

The Environment Agency rated the Gores Brook as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by insects and other small river life, ammonia and dissolved oxygen. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

RM9 in short

Tap water in RM9 (Barking and Dagenham) is supplied by Essex & Suffolk Water and scores 9.0 out of 10, against an England and Wales average of 9.2. None of the 21 tested substances came close to a limit. The latest sample is from 19 December 2025.

  • Nitrate is the reading closest to its limit, at 58% of the 50 mg/L maximumIt passed with room to spare, and everything else tested sat further below its limit. See every reading
  • Very hard water at 298 mg/LThe threshold for very hard is 250 mg/L. Expect visible limescale on taps and in kettles in RM9. How hardness is measured
  • 2nd cleanest of 4 areas tested in Barking and DagenhamOnly 1 area in Barking and Dagenham scored higher. The best is RM10 on 9.

Questions about RM9 water

Is RM9 tap water safe to drink?

Based on the latest tests, RM9 (Barking and Dagenham) water scores 9/10, which is safe. 0 of 21 tested contaminants exceeded recommended levels. Water is supplied by Essex & Suffolk Water.

What contaminants are in RM9 water?

We tested 21 contaminants in RM9 water. None exceeded recommended safe levels.

Who supplies water in RM9?

RM9 (Barking and Dagenham) is supplied by Essex & Suffolk Water. You can view their full profile and compliance data on our supplier page.

Is RM9 water hard or soft?

Water in RM9 (Barking and Dagenham) has a hardness of 298 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in RM9?

RM9 water scored 9/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in RM9 water?

No PFAS (forever chemicals) result is attached to the tap-water tests for RM9, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.

How clean is the river near RM9?

The Environment Agency rated the Gores Brook as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by insects and other small river life, ammonia and dissolved oxygen. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in RM9, which is treated before it reaches homes.

Keep reading

Boiling water taps and hard waterHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near RM9

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
pH8.38 pHNone
Temperature16.9 °CNone
Conductivity746 µS/cmNone
Ammonia0.24 mg/L0.5 mg/L
Nitrate2.2 mg/L50 mg/L
Nitrite0.35 mg/L0.5 mg/L
Phosphate0.37 mg/LNone
Dissolved Oxygen11.7 mg/LNone
Lead0.002 mg/L0.01 mg/L
Cadmium0.000029 mg/L0.005 mg/L
Copper0.0021 mg/L2 mg/L
Zinc0.016 mg/LNone
Nickel0.0045 mg/L0.02 mg/L
PFAS (total)0.014 µg/LNone

Source: Essex & Suffolk Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from