Skip to main content
tapwater
England and Wales average 9.2

Tap water in RM8, Barking and DagenhamSafe to drink.Very hard.

Supplied by Essex & Suffolk Water. 5,782 samples, 21 substances, latest on 18 December 2025. Everything is inside the legal limit. One result, nitrate, sits close to the line.

8.9 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 308 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

Waterdrop G3P600 Reverse Osmosis

Waterdrop G3P600 Reverse Osmosis

£550typical price

Removes nitrate, the result that stood out in RM8.

Osmio PRO-III Ultimate Whole House

£499typical price

Removes nitrate, the result that stood out in RM8.

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if RM8’s water changes

We check for supply incidents every fifteen minutes. If one affects RM8, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for RM8

What's in a glass of RM8 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrate came closest to a limit, at 78% of it. 17 of 19 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitCopper: 0.0061 mg/L, <1% of the 2 mg/L limitCopper<1%Cadmium: 0.000025 mg/L, <1% of the 0.005 mg/L limitCadmium<1%Manganese: 0.00028 mg/L, <1% of the 0.05 mg/L limitManganese<1%Nitrite: 0.0061 mg/L, 1% of the 0.5 mg/L limitNitrite1%Chromium: 0.00067 mg/L, 1% of the 0.05 mg/L limitChromium1%Lead: 0.00019 mg/L, 2% of the 0.01 mg/L limitLead2%Selenium: 0.00083 mg/L, 2% of the 0.04 mg/L limitSelenium2%Mercury: 0.000022 mg/L, 2% of the 0.001 mg/L limitMercury2%Iron: 0.0052 mg/L, 3% of the 0.2 mg/L limitIron3%Turbidity: 0.15 NTU, 4% of the 4 NTU limitTurbidity4%Colour: 1 mg/L Pt/Co, 5% of the 20 mg/L Pt/Co limitColour5%Aluminium: 0.012 mg/L, 6% of the 0.2 mg/L limitAluminium6%Boron: 0.063 mg/L, 6% of the 1 mg/L limitBoron6%Nickel: 0.0021 mg/L, 11% of the 0.02 mg/L limitNickel11%Antimony: 0.00055 mg/L, 11% of the 0.005 mg/L limitAntimony11%Fluoride: 0.19 mg/L, 13% of the 1.5 mg/L limitFluoride13%Arsenic: 0.0013 mg/L, 13% of the 0.01 mg/L limitArsenic13%Bromate: 0.0025 mg/L, 25% of the 0.01 mg/L limitBromate25%Nitrate: 39 mg/L, 78% of the 50 mg/L limitNitrate78%
  1. Nitrate78%
  2. Bromate25%
  3. Arsenic13%
  4. Fluoride13%
  5. Antimony11%
  6. Nickel11%
  7. Boron6%
  8. Aluminium6%
  9. Colour5%
  10. Turbidity4%
  11. Iron3%
  12. Mercury2%
  13. Selenium2%
  14. Lead2%
  15. Chromium1%
  16. Nitrite1%
  17. Manganese<1%
  18. Cadmium<1%
  19. Copper<1%
  • Conductivity 700 µS/cm
  • pH 7.9 pH
All 21 results as a table
SubstanceResultLegal limitShare of limit
Nitrate39 mg/L50 mg/L
78%
Turbidity0.15 NTU4 NTU
4%
Nitrite0.0061 mg/L0.5 mg/L
1%
Manganese0.00028 mg/L0.05 mg/L
<1%
Conductivity700 µS/cmNo legal limit–
pH7.9 pHNo legal limit–
Colour1 mg/L Pt/Co20 mg/L Pt/Co
5%
Iron0.0052 mg/L0.2 mg/L
3%
Aluminium0.012 mg/L0.2 mg/L
6%
Lead0.00019 mg/L0.01 mg/L
2%
Antimony0.00055 mg/L0.005 mg/L
11%
Copper0.0061 mg/L2 mg/L
<1%
Boron0.063 mg/L1 mg/L
6%
Chromium0.00067 mg/L0.05 mg/L
1%
Cadmium0.000025 mg/L0.005 mg/L
<1%
Nickel0.0021 mg/L0.02 mg/L
11%
Selenium0.00083 mg/L0.04 mg/L
2%
Bromate0.0025 mg/L0.01 mg/L
25%
Arsenic0.0013 mg/L0.01 mg/L
13%
Mercury0.000022 mg/L0.001 mg/L
2%
Fluoride0.19 mg/L1.5 mg/L
13%

308mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Over 200 mg/L, the building regulations guidance for England counts this as a hard water area: a new combination boiler or water heater should have limescale protection. The 200 ppm rule

Softener quotes for RM8

Leave your details and we will email you when we can match you with installers who cover RM8. No obligation.

A fitted softener typically costs £1,195 to £2,900. Prices by brand, with sources. Request a free assessment and we'll come back to you with local installer options for your area.

RM8— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Mayes Brook, rated moderate

The Environment Agency rated the Mayes Brook as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by fish, insects and other small river life and dissolved oxygen. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

RM8 in short

Tap water in RM8 (Barking and Dagenham) is supplied by Essex & Suffolk Water and scores 8.9 out of 10, against an England and Wales average of 9.2. 1 of 21 tested substances was close to or over a limit. The latest sample is from 18 December 2025.

  • Nitrate is within its legal limit but flagged, at 78% of the 50 mg/L maximumAnything over three quarters of a limit is flagged here as worth watching. It has not gone over. See every reading
  • Among the hardest water in the country at 308 mg/LVery hard starts at 250 mg/L. At this level kettles scale up within weeks and a softener is a normal purchase in RM8. How hardness is measured
  • 3rd cleanest of 4 areas tested in Barking and Dagenham1 area in Barking and Dagenham scored lower. The best is RM10 on 9.

Questions about RM8 water

Is RM8 tap water safe to drink?

Based on the latest tests, RM8 (Barking and Dagenham) water scores 8.9/10, which is safe. 1 of 21 tested contaminants exceeded recommended levels. Water is supplied by Essex & Suffolk Water.

What contaminants are in RM8 water?

We tested 21 contaminants in RM8 water. 1 were flagged, including Nitrate.

Who supplies water in RM8?

RM8 (Barking and Dagenham) is supplied by Essex & Suffolk Water. You can view their full profile and compliance data on our supplier page.

Is RM8 water hard or soft?

Water in RM8 (Barking and Dagenham) has a hardness of 308 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in RM8?

With 1 contaminant above recommended levels in RM8, a water filter could help. A filter jug or under-sink filter can reduce most common contaminants. See our filter recommendations for your area.

Are there PFAS forever chemicals in RM8 water?

No PFAS (forever chemicals) result is attached to the tap-water tests for RM8, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.

How clean is the river near RM8?

The Environment Agency rated the Mayes Brook as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by fish, insects and other small river life and dissolved oxygen. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in RM8, which is treated before it reaches homes.

Keep reading

Nitrate levelsBoiling water taps and hard waterHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near RM8

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
pH7.49 pHNone
Temperature9.5 °CNone
Conductivity687 µS/cmNone
Ammonia0.25 mg/L0.5 mg/L
Nitrate3.1 mg/L50 mg/L
Nitrite0.12 mg/L0.5 mg/L
Phosphate0.55 mg/LNone
Dissolved Oxygen6.35 mg/LNone
Iron0.0509 mg/L0.2 mg/L

Source: Essex & Suffolk Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from