Skip to main content
tapwater
England and Wales average 9.2

Tap water in IG2, RedbridgeSafe to drink.Very hard.

Supplied by Essex & Suffolk Water. 3,978 samples, 21 substances, latest on 19 December 2025. Everything is inside the legal limit, and nothing comes close to it.

8.9 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 308 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 10-Cup Jug

ZeroWater 10-Cup Jug

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if IG2’s water changes

We check for supply incidents every fifteen minutes. If one affects IG2, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for IG2

What's in a glass of IG2 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrate came closest to a limit, at 72% of it. 17 of 19 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitCadmium: 0.000025 mg/L, <1% of the 0.005 mg/L limitCadmium<1%Manganese: 0.00028 mg/L, <1% of the 0.05 mg/L limitManganese<1%Nitrite: 0.0061 mg/L, 1% of the 0.5 mg/L limitNitrite1%Chromium: 0.00067 mg/L, 1% of the 0.05 mg/L limitChromium1%Copper: 0.038 mg/L, 2% of the 2 mg/L limitCopper2%Selenium: 0.00083 mg/L, 2% of the 0.04 mg/L limitSelenium2%Mercury: 0.000022 mg/L, 2% of the 0.001 mg/L limitMercury2%Iron: 0.0052 mg/L, 3% of the 0.2 mg/L limitIron3%Turbidity: 0.14 NTU, 4% of the 4 NTU limitTurbidity4%Aluminium: 0.012 mg/L, 6% of the 0.2 mg/L limitAluminium6%Colour: 1.2 mg/L Pt/Co, 6% of the 20 mg/L Pt/Co limitColour6%Lead: 0.00063 mg/L, 6% of the 0.01 mg/L limitLead6%Boron: 0.069 mg/L, 7% of the 1 mg/L limitBoron7%Antimony: 0.00053 mg/L, 11% of the 0.005 mg/L limitAntimony11%Fluoride: 0.17 mg/L, 11% of the 1.5 mg/L limitFluoride11%Nickel: 0.0023 mg/L, 12% of the 0.02 mg/L limitNickel12%Arsenic: 0.0013 mg/L, 13% of the 0.01 mg/L limitArsenic13%Bromate: 0.0027 mg/L, 27% of the 0.01 mg/L limitBromate27%Nitrate: 36 mg/L, 72% of the 50 mg/L limitNitrate72%
  1. Nitrate72%
  2. Bromate27%
  3. Arsenic13%
  4. Nickel12%
  5. Fluoride11%
  6. Antimony11%
  7. Boron7%
  8. Lead6%
  9. Aluminium6%
  10. Colour6%
  11. Turbidity4%
  12. Iron3%
  13. Mercury2%
  14. Selenium2%
  15. Copper2%
  16. Chromium1%
  17. Nitrite1%
  18. Manganese<1%
  19. Cadmium<1%
  • Conductivity 690 µS/cm
  • pH 7.9 pH
All 21 results as a table
SubstanceResultLegal limitShare of limit
Aluminium0.012 mg/L0.2 mg/L
6%
Manganese0.00028 mg/L0.05 mg/L
<1%
Conductivity690 µS/cmNo legal limit–
pH7.9 pHNo legal limit–
Nitrate36 mg/L50 mg/L
72%
Iron0.0052 mg/L0.2 mg/L
3%
Turbidity0.14 NTU4 NTU
4%
Nitrite0.0061 mg/L0.5 mg/L
1%
Colour1.2 mg/L Pt/Co20 mg/L Pt/Co
6%
Bromate0.0027 mg/L0.01 mg/L
27%
Copper0.038 mg/L2 mg/L
2%
Selenium0.00083 mg/L0.04 mg/L
2%
Lead0.00063 mg/L0.01 mg/L
6%
Chromium0.00067 mg/L0.05 mg/L
1%
Antimony0.00053 mg/L0.005 mg/L
11%
Arsenic0.0013 mg/L0.01 mg/L
13%
Nickel0.0023 mg/L0.02 mg/L
12%
Cadmium0.000025 mg/L0.005 mg/L
<1%
Fluoride0.17 mg/L1.5 mg/L
11%
Mercury0.000022 mg/L0.001 mg/L
2%
Boron0.069 mg/L1 mg/L
7%

308mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Over 200 mg/L, the building regulations guidance for England counts this as a hard water area: a new combination boiler or water heater should have limescale protection. The 200 ppm rule

Softener quotes for IG2

Leave your details and we will email you when we can match you with installers who cover IG2. No obligation.

A fitted softener typically costs £1,195 to £2,900. Prices by brand, with sources. Request a free assessment and we'll come back to you with local installer options for your area.

IG2— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Lower Roding (Loughton to Thames), rated moderate

The Environment Agency rated the Lower Roding (Loughton to Thames) as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by phosphate and insects and other small river life. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

Within 10 km

562

forever-chemical detections in nearby rivers and groundwater

At 7 sites. The highest was 6:2 FtSAB at 0.016 µg/L, at Lee at Carpenters Rd, 7.7 km away, in January 2026. These are river and borehole samples, not tests of your tap water.

Every PFAS sample around London · Which filters remove PFAS · PFAS explained

IG2 in short

Tap water in IG2 (Redbridge) is supplied by Essex & Suffolk Water (about 78% of postcodes; Thames Water supplies the rest) and scores 8.9 out of 10, against an England and Wales average of 9.2. None of the 21 tested substances came close to a limit. The latest sample is from 19 December 2025.

  • Among the hardest water in the country at 308 mg/LVery hard starts at 250 mg/L. At this level kettles scale up within weeks and a softener is a normal purchase in IG2. How hardness is measured
  • Nitrate is the reading closest to its limit, at 72% of the 50 mg/L maximumIt passed with room to spare, and everything else tested sat further below its limit. See every reading
  • 3rd cleanest of 10 areas tested in RedbridgeOnly 2 areas in Redbridge scored higher. The best is IG1 on 9.

Questions about IG2 water

Is IG2 tap water safe to drink?

Based on the latest tests, IG2 (Redbridge) water scores 8.9/10, which is safe. 0 of 21 tested contaminants exceeded recommended levels. Water is supplied by Essex & Suffolk Water.

What contaminants are in IG2 water?

We tested 21 contaminants in IG2 water. None exceeded recommended safe levels. PFAS (forever chemicals) were also measured in rivers and groundwater within 10 km, though not in the tap-water tests themselves.

Who supplies water in IG2?

IG2 (Redbridge) is supplied by Essex & Suffolk Water. You can view their full profile and compliance data on our supplier page.

Is IG2 water hard or soft?

Water in IG2 (Redbridge) has a hardness of 308 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in IG2?

IG2 water scored 8.9/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in IG2 water?

The tap-water tests we hold for IG2 do not include a PFAS result. Environment Agency monitoring found PFAS in 562 river and groundwater samples from 7 sites within 10 km of IG2, the highest being 6:2 FtSAB at 0.016 µg/L about 7.7 km away. These are environmental samples, not tests of tap water. The UK currently has no legal limit for PFAS in drinking water; the Drinking Water Inspectorate uses a 0.1 µg/L guideline for individual compounds. Reverse osmosis filters can reduce PFAS levels.

How clean is the river near IG2?

The Environment Agency rated the Lower Roding (Loughton to Thames) as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by phosphate and insects and other small river life. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in IG2, which is treated before it reaches homes.

Keep reading

PFAS explainedBoiling water taps and hard waterHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near IG2

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
pH8.38 pHNone
Temperature16.9 °CNone
Conductivity746 µS/cmNone
Ammonia0.24 mg/L0.5 mg/L
Nitrate2.2 mg/L50 mg/L
Nitrite0.35 mg/L0.5 mg/L
Phosphate0.37 mg/LNone
Dissolved Oxygen11.7 mg/LNone
Iron0.0509 mg/L0.2 mg/L
Zinc0.000833 mg/LNone
Copper0.000305 mg/L2 mg/L

Source: Essex & Suffolk Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from