Skip to main content
tapwater
England and Wales average 9.2

Tap water in BD1, BradfordSafe to drink.Soft.

Supplied by Yorkshire Water. 962 samples, 25 substances, latest on 29 September 2026. Everything is inside the legal limit, and nothing comes close to it.

9.6 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

ZeroWater 10-Cup Jug

ZeroWater 10-Cup Jug

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

BRITA Marella XL + MAXTRA PRO

BRITA Marella XL + MAXTRA PRO

£25typical price

Basic chlorine and taste improvement on a budget

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if BD1’s water changes

We check for supply incidents every fifteen minutes. If one affects BD1, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for BD1

What's in a glass of BD1 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Trihalomethanes came closest to a limit, at 41% of it. 19 of 20 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitChromium: 0.00019 mg/L, <1% of the 0.05 mg/L limitChromium<1%Cadmium: 0.000031 mg/L, <1% of the 0.005 mg/L limitCadmium<1%Copper: 0.0164 mg/L, <1% of the 2 mg/L limitCopper<1%Lead: 0.00009 mg/L, <1% of the 0.01 mg/L limitLead<1%Boron: 0.0107 mg/L, 1% of the 1 mg/L limitBoron1%Selenium: 0.00043 mg/L, 1% of the 0.04 mg/L limitSelenium1%Arsenic: 0.00013 mg/L, 1% of the 0.01 mg/L limitArsenic1%Antimony: 0.000077 mg/L, 2% of the 0.005 mg/L limitAntimony2%Nitrite: 0.008 mg/L, 2% of the 0.5 mg/L limitNitrite2%Bromate: 0.0002 mg/L, 2% of the 0.01 mg/L limitBromate2%Manganese: 0.00101 mg/L, 2% of the 0.05 mg/L limitManganese2%Turbidity: 0.13 NTU, 3% of the 4 NTU limitTurbidity3%Fluoride: 0.05 mg/L, 3% of the 1.5 mg/L limitFluoride3%Nickel: 0.0007 mg/L, 3% of the 0.02 mg/L limitNickel3%Mercury: 0.00004 mg/L, 4% of the 0.001 mg/L limitMercury4%Iron: 0.00871 mg/L, 4% of the 0.2 mg/L limitIron4%Aluminium: 0.0111 mg/L, 6% of the 0.2 mg/L limitAluminium6%Nitrate: 3.73 mg/L, 7% of the 50 mg/L limitNitrate7%Colour: 2 mg/L Pt/Co, 10% of the 20 mg/L Pt/Co limitColour10%Trihalomethanes: 0.0415 mg/L, 41% of the 0.1 mg/L limitTrihalomethanes41%
  1. Trihalomethanes41%
  2. Colour10%
  3. Nitrate7%
  4. Aluminium6%
  5. Iron4%
  6. Mercury4%
  7. Nickel3%
  8. Fluoride3%
  9. Turbidity3%
  10. Manganese2%
  11. Bromate2%
  12. Nitrite2%
  13. Antimony2%
  14. Arsenic1%
  15. Selenium1%
  16. Boron1%
  17. Lead<1%
  18. Copper<1%
  19. Cadmium<1%
  20. Chromium<1%
  • E. coli none found
  • Coliform Bacteria none found
  • Conductivity 184 µS/cm
  • Phosphate 1.02 mg/L
All 25 results as a table
SubstanceResultLegal limitShare of limit
E. coli0 count/100mlMust be zeroNone found
Coliform Bacteria0 count/100mlMust be zeroNone found
Turbidity0.13 NTU4 NTU
3%
Iron0.00871 mg/L0.2 mg/L
4%
Manganese0.00101 mg/L0.05 mg/L
2%
Conductivity184 µS/cmNo legal limit–
Colour2 mg/L Pt/Co20 mg/L Pt/Co
10%
Aluminium0.0111 mg/L0.2 mg/L
6%
Phosphate1.02 mg/LNo legal limit–
Antimony0.000077 mg/L0.005 mg/L
2%
Arsenic0.00013 mg/L0.01 mg/L
1%
Selenium0.00043 mg/L0.04 mg/L
1%
Cadmium0.000031 mg/L0.005 mg/L
<1%
Chromium0.00019 mg/L0.05 mg/L
<1%
Nickel0.0007 mg/L0.02 mg/L
3%
Trihalomethanes0.0415 mg/L0.1 mg/L
41%
Copper0.0164 mg/L2 mg/L
<1%
Bromate0.0002 mg/L0.01 mg/L
2%
Nitrate3.73 mg/L50 mg/L
7%
Nitrite0.008 mg/L0.5 mg/L
2%
Lead0.00009 mg/L0.01 mg/L
<1%
Mercury0.00004 mg/L0.001 mg/L
4%
Fluoride0.05 mg/L1.5 mg/L
3%
Boron0.0107 mg/L1 mg/L
1%
Hardness (as CaCO3)64.9 mg/LNo legal limit–

57mg of limescale minerals in every litre

Soft water. Kind to kettles, boilers and skin

You will not need a softener here, and you will use less soap and detergent than most of England.

Soft400 mg/L
Outside your tap

Your river is the Bradford Beck (Clayton Bk to R Aire), rated moderate

The Environment Agency rated the Bradford Beck (Clayton Bk to R Aire) as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by fish and insects and other small river life. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

Within 10 km

143

forever-chemical detections in nearby rivers and groundwater

At 5 sites. The highest was PFPeA at 0.24 µg/L, at Bradford Rd, Bailiff Bridge 2/27/12/098, 8.8 km away, in June 2025. These are river and borehole samples, not tests of your tap water.

Every PFAS sample around Bradford · Which filters remove PFAS · PFAS explained

BD1 in short

Tap water in BD1 (Bradford) is supplied by Yorkshire Water and scores 9.6 out of 10, against an England and Wales average of 9.2. None of the 25 tested substances came close to a limit. The latest sample is from 29 September 2026.

  • 3rd cleanest of 21 areas tested in BradfordOnly 2 areas in Bradford scored higher. The best is BD20 on 9.7. Every area in Bradford
  • Trihalomethanes is the reading closest to its limit, at 41% of the 0.1 mg/L maximumIt passed with room to spare, and everything else tested sat further below its limit. See every reading
  • Soft water at 57 mg/LLimescale is not a problem in BD1, so skip softeners and scale filters entirely. How hardness is measured

Questions about BD1 water

Is BD1 tap water safe to drink?

Based on the latest tests, BD1 (Bradford) water scores 9.6/10, which is safe. 0 of 25 tested contaminants exceeded recommended levels. Water is supplied by Yorkshire Water.

What contaminants are in BD1 water?

We tested 25 contaminants in BD1 water. None exceeded recommended safe levels. PFAS (forever chemicals) were also measured in rivers and groundwater within 10 km, though not in the tap-water tests themselves.

Who supplies water in BD1?

BD1 (Bradford) is supplied by Yorkshire Water. You can view their full profile and compliance data on our supplier page.

Is BD1 water hard or soft?

Water in BD1 (Bradford) has a hardness of 57 mg/L CaCO3, which is classified as soft. Soft water is gentle on appliances and skin.

Should I use a water filter in BD1?

BD1 water scored 9.6/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in BD1 water?

The tap-water tests we hold for BD1 do not include a PFAS result. Environment Agency monitoring found PFAS in 143 river and groundwater samples from 5 sites within 10 km of BD1, the highest being PFPeA at 0.24 µg/L about 8.8 km away. These are environmental samples, not tests of tap water. The UK currently has no legal limit for PFAS in drinking water; the Drinking Water Inspectorate uses a 0.1 µg/L guideline for individual compounds. Reverse osmosis filters can reduce PFAS levels.

How clean is the river near BD1?

The Environment Agency rated the Bradford Beck (Clayton Bk to R Aire) as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by fish and insects and other small river life. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in BD1, which is treated before it reaches homes.

Keep reading

PFAS explainedHow to test your waterBest water filtersFilter shower headsWater testing kitsAll of BradfordUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near BD1

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
pH7.84 pHNone
Nickel0.0017 mg/L0.02 mg/L
Lead0.00013 mg/L0.01 mg/L
Temperature8.9 °CNone
Conductivity394 µS/cmNone
Ammonia0.084 mg/L0.5 mg/L
Nitrate0.8 mg/L50 mg/L
Hardness (as CaCO3)35 mg/LNone
Fluoride0.098 mg/L1.5 mg/L
Zinc0.006 mg/LNone
Manganese0.0015 mg/L0.05 mg/L
Copper0.0012 mg/L2 mg/L
Dissolved Oxygen7.65 mg/LNone

Source: Yorkshire Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from