Skip to main content
tapwater
England and Wales average 9.2

Tap water in BD2, BradfordSafe to drink.Moderately soft.

Supplied by Yorkshire Water. 1,146 samples, 25 substances, latest on 10 November 2026. Everything is inside the legal limit, and nothing comes close to it.

9.6 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

ZeroWater 10-Cup Jug

ZeroWater 10-Cup Jug

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

BRITA Marella XL + MAXTRA PRO

BRITA Marella XL + MAXTRA PRO

£25typical price

Basic chlorine and taste improvement on a budget

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if BD2’s water changes

We check for supply incidents every fifteen minutes. If one affects BD2, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for BD2

What's in a glass of BD2 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Trihalomethanes came closest to a limit, at 44% of it. 19 of 20 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitCopper: 0.00355 mg/L, <1% of the 2 mg/L limitCopper<1%Chromium: 0.00019 mg/L, <1% of the 0.05 mg/L limitChromium<1%Cadmium: 0.000032 mg/L, <1% of the 0.005 mg/L limitCadmium<1%Boron: 0.0077 mg/L, <1% of the 1 mg/L limitBoron<1%Lead: 0.00009 mg/L, <1% of the 0.01 mg/L limitLead<1%Selenium: 0.00043 mg/L, 1% of the 0.04 mg/L limitSelenium1%Nitrite: 0.008 mg/L, 2% of the 0.5 mg/L limitNitrite2%Arsenic: 0.00016 mg/L, 2% of the 0.01 mg/L limitArsenic2%Manganese: 0.00101 mg/L, 2% of the 0.05 mg/L limitManganese2%Nickel: 0.00048 mg/L, 2% of the 0.02 mg/L limitNickel2%Fluoride: 0.04 mg/L, 3% of the 1.5 mg/L limitFluoride3%Antimony: 0.000134 mg/L, 3% of the 0.005 mg/L limitAntimony3%Turbidity: 0.11 NTU, 3% of the 4 NTU limitTurbidity3%Iron: 0.00629 mg/L, 3% of the 0.2 mg/L limitIron3%Bromate: 0.0004 mg/L, 4% of the 0.01 mg/L limitBromate4%Mercury: 0.00004 mg/L, 4% of the 0.001 mg/L limitMercury4%Nitrate: 3.73 mg/L, 7% of the 50 mg/L limitNitrate7%Aluminium: 0.02 mg/L, 10% of the 0.2 mg/L limitAluminium10%Colour: 3 mg/L Pt/Co, 15% of the 20 mg/L Pt/Co limitColour15%Trihalomethanes: 0.0445 mg/L, 44% of the 0.1 mg/L limitTrihalomethanes44%
  1. Trihalomethanes44%
  2. Colour15%
  3. Aluminium10%
  4. Nitrate7%
  5. Bromate4%
  6. Mercury4%
  7. Iron3%
  8. Turbidity3%
  9. Antimony3%
  10. Fluoride3%
  11. Nickel2%
  12. Manganese2%
  13. Nitrite2%
  14. Arsenic2%
  15. Selenium1%
  16. Lead<1%
  17. Boron<1%
  18. Cadmium<1%
  19. Chromium<1%
  20. Copper<1%
  • E. coli none found
  • Coliform Bacteria none found
  • Conductivity 202 µS/cm
  • Phosphate 0 mg/L
All 25 results as a table
SubstanceResultLegal limitShare of limit
Iron0.00629 mg/L0.2 mg/L
3%
Manganese0.00101 mg/L0.05 mg/L
2%
E. coli0 count/100mlMust be zeroNone found
Colour3 mg/L Pt/Co20 mg/L Pt/Co
15%
Aluminium0.02 mg/L0.2 mg/L
10%
Coliform Bacteria0 count/100mlMust be zeroNone found
Conductivity202 µS/cmNo legal limit–
Turbidity0.11 NTU4 NTU
3%
Phosphate0 mg/LNo legal limit–
Antimony0.000134 mg/L0.005 mg/L
3%
Nitrate3.73 mg/L50 mg/L
7%
Nitrite0.008 mg/L0.5 mg/L
2%
Cadmium0.000032 mg/L0.005 mg/L
<1%
Chromium0.00019 mg/L0.05 mg/L
<1%
Nickel0.00048 mg/L0.02 mg/L
2%
Copper0.00355 mg/L2 mg/L
<1%
Trihalomethanes0.0445 mg/L0.1 mg/L
44%
Bromate0.0004 mg/L0.01 mg/L
4%
Lead0.00009 mg/L0.01 mg/L
<1%
Arsenic0.00016 mg/L0.01 mg/L
2%
Selenium0.00043 mg/L0.04 mg/L
1%
Hardness (as CaCO3)108 mg/LNo legal limit–
Fluoride0.04 mg/L1.5 mg/L
3%
Boron0.0077 mg/L1 mg/L
<1%
Mercury0.00004 mg/L0.001 mg/L
4%

94mg of limescale minerals in every litre

Soft water. Kind to kettles, boilers and skin

You will not need a softener here, and you will use less soap and detergent than most of England.

Soft400 mg/L
Outside your tap

Your river is the Bradford Beck (Clayton Bk to R Aire), rated moderate

The Environment Agency rated the Bradford Beck (Clayton Bk to R Aire) as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by fish and insects and other small river life. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

Within 10 km

129

forever-chemical detections in nearby rivers and groundwater

At 4 sites. The highest was 6:2 FTSA at 0.11 µg/L, at RSN0008 Royds Hall Beck at Low Wood, 9.1 km away, in August 2026. These are river and borehole samples, not tests of your tap water.

Every PFAS sample around Bradford · Which filters remove PFAS · PFAS explained

BD2 in short

Tap water in BD2 (Bradford) is supplied by Yorkshire Water and scores 9.6 out of 10, against an England and Wales average of 9.2. None of the 25 tested substances came close to a limit. The latest sample is from 10 November 2026.

  • Trihalomethanes is the reading closest to its limit, at 44% of the 0.1 mg/L maximumIt passed with room to spare, and everything else tested sat further below its limit. See every reading
  • 7th cleanest of 21 areas tested in BradfordOnly 6 areas in Bradford scored higher. The best is BD20 on 9.7. Every area in Bradford
  • PFAS found at 4 monitoring sites within 10 kmThose are river and groundwater samples, not tap water. The highest was 6:2 FTSA about 9.1 km away. What was measured

Questions about BD2 water

Is BD2 tap water safe to drink?

Based on the latest tests, BD2 (Bradford) water scores 9.6/10, which is safe. 0 of 25 tested contaminants exceeded recommended levels. Water is supplied by Yorkshire Water.

What contaminants are in BD2 water?

We tested 25 contaminants in BD2 water. None exceeded recommended safe levels. PFAS (forever chemicals) were also measured in rivers and groundwater within 10 km, though not in the tap-water tests themselves.

Who supplies water in BD2?

BD2 (Bradford) is supplied by Yorkshire Water. You can view their full profile and compliance data on our supplier page.

Is BD2 water hard or soft?

Water in BD2 (Bradford) has a hardness of 94 mg/L CaCO3, which is classified as moderately soft. This is a moderate hardness level.

Should I use a water filter in BD2?

BD2 water scored 9.6/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in BD2 water?

The tap-water tests we hold for BD2 do not include a PFAS result. Environment Agency monitoring found PFAS in 129 river and groundwater samples from 4 sites within 10 km of BD2, the highest being 6:2 FTSA at 0.11 µg/L about 9.1 km away. These are environmental samples, not tests of tap water. The UK currently has no legal limit for PFAS in drinking water; the Drinking Water Inspectorate uses a 0.1 µg/L guideline for individual compounds. Reverse osmosis filters can reduce PFAS levels.

How clean is the river near BD2?

The Environment Agency rated the Bradford Beck (Clayton Bk to R Aire) as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by fish and insects and other small river life. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in BD2, which is treated before it reaches homes.

Keep reading

PFAS explainedHow to test your waterBest water filtersFilter shower headsWater testing kitsAll of BradfordUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near BD2

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
Lead0.00013 mg/L0.01 mg/L
pH7.4 pHNone
Temperature8.9 °CNone
Conductivity394 µS/cmNone
Ammonia0.084 mg/L0.5 mg/L
Nitrate0.8 mg/L50 mg/L
Hardness (as CaCO3)35 mg/LNone
Fluoride0.098 mg/L1.5 mg/L
Zinc0.006 mg/LNone
Nickel0.00024 mg/L0.02 mg/L
Manganese0.0015 mg/L0.05 mg/L
Copper0.0012 mg/L2 mg/L
Dissolved Oxygen7.65 mg/LNone

Source: Yorkshire Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from