Skip to main content
tapwater
England and Wales average 9.0

Tap water in BA13, WiltshireSafe to drink.Very hard.

Supplied by Thames Water. 71 samples, 23 substances, latest on 31 December 2025. Everything is inside the legal limit, and nothing comes close to it.

8.8 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 264 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 12-Cup Ready-Pour

ZeroWater 12-Cup Ready-Pour

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

What's in a glass of BA13 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrite came closest to a limit, at 58% of it. 16 of 19 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitManganese: 0.0006 mg/L, 1% of the 0.05 mg/L limitManganese1%Boron: 0.02 mg/L, 2% of the 1 mg/L limitBoron2%Selenium: 0.0008 mg/L, 2% of the 0.04 mg/L limitSelenium2%Copper: 0.06 mg/L, 3% of the 2 mg/L limitCopper3%Iron: 0.007 mg/L, 3% of the 0.2 mg/L limitIron3%Trihalomethanes: 0.004 mg/L, 4% of the 0.1 mg/L limitTrihalomethanes4%Aluminium: 0.0082 mg/L, 4% of the 0.2 mg/L limitAluminium4%Chromium: 0.0025 mg/L, 5% of the 0.05 mg/L limitChromium5%Antimony: 0.0003 mg/L, 6% of the 0.005 mg/L limitAntimony6%Mercury: 0.00007 mg/L, 7% of the 0.001 mg/L limitMercury7%Arsenic: 0.0007 mg/L, 7% of the 0.01 mg/L limitArsenic7%Fluoride: 0.12 mg/L, 8% of the 1.5 mg/L limitFluoride8%Cadmium: 0.0004 mg/L, 8% of the 0.005 mg/L limitCadmium8%Colour: 1.8 mg/L Pt/Co, 9% of the 20 mg/L Pt/Co limitColour9%Bromate: 0.001 mg/L, 10% of the 0.01 mg/L limitBromate10%Lead: 0.0017 mg/L, 17% of the 0.01 mg/L limitLead17%Nitrate: 14.6 mg/L, 29% of the 50 mg/L limitNitrate29%Nickel: 0.0083 mg/L, 42% of the 0.02 mg/L limitNickel42%Nitrite: 0.29 mg/L, 58% of the 0.5 mg/L limitNitrite58%
  1. Nitrite58%
  2. Nickel42%
  3. Nitrate29%
  4. Lead17%
  5. Bromate10%
  6. Colour9%
  7. Fluoride8%
  8. Cadmium8%
  9. Mercury7%
  10. Arsenic7%
  11. Antimony6%
  12. Chromium5%
  13. Aluminium4%
  14. Trihalomethanes4%
  15. Iron3%
  16. Copper3%
  17. Boron2%
  18. Selenium2%
  19. Manganese1%
  • Coliform Bacteria none found
  • E. coli none found
  • Conductivity 462 µS/cm
All 23 results as a table
SubstanceResultLegal limitShare of limit
Coliform Bacteria0 count/100mlMust be zeroNone found
E. coli0 count/100mlMust be zeroNone found
Colour1.8 mg/L Pt/Co20 mg/L Pt/Co
9%
Conductivity462 µS/cmNo legal limit–
Fluoride0.12 mg/L1.5 mg/L
8%
Nitrate14.6 mg/L50 mg/L
29%
Nitrite0.29 mg/L0.5 mg/L
58%
Hardness (as CaCO3)264 mg/LNo legal limit–
Aluminium0.0082 mg/L0.2 mg/L
4%
Antimony0.0003 mg/L0.005 mg/L
6%
Arsenic0.0007 mg/L0.01 mg/L
7%
Boron0.02 mg/L1 mg/L
2%
Cadmium0.0004 mg/L0.005 mg/L
8%
Chromium0.0025 mg/L0.05 mg/L
5%
Copper0.06 mg/L2 mg/L
3%
Iron0.007 mg/L0.2 mg/L
3%
Lead0.0017 mg/L0.01 mg/L
17%
Manganese0.0006 mg/L0.05 mg/L
1%
Mercury0.00007 mg/L0.001 mg/L
7%
Nickel0.0083 mg/L0.02 mg/L
42%
Selenium0.0008 mg/L0.04 mg/L
2%
Trihalomethanes0.004 mg/L0.1 mg/L
4%
Bromate0.001 mg/L0.01 mg/L
10%

264mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Softener quotes for BA13

Leave your details and we will email you when we can match you with installers who cover BA13. No obligation.

Request a free assessment and we'll come back to you with local installer options for your area.

BA13— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Bitham Bk - source to conf Biss Bk, rated moderate

The Environment Agency rated the Bitham Bk - source to conf Biss Bk as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by organic pollution (bod), fish and insects and other small river life. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

Within 10 km

28

forever-chemical detections in nearby rivers and groundwater

At 3 sites. The highest was PFOA at 0.019 µg/L, at RSN0957 Lambrok Stream Downstream Road Bridge Brook Lane, 6.8 km away, in September 2023. These are river and borehole samples, not tests of your tap water.

Every PFAS sample around Bath · Which filters remove PFAS · PFAS explained

BA13 in short

Tap water in BA13 (Wiltshire) is supplied by Thames Water in the Wiltshire Central zone and scores 8.8 out of 10, against an England and Wales average of 9.0. None of the 23 tested substances came close to a limit. The latest sample is from 31 December 2025.

  • 2nd cleanest of 19 areas tested in WiltshireOnly 1 area in Wiltshire scored higher. The best is SN9 on 9.3.
  • Nitrite is the reading closest to its limit, at 58% of the 0.5 mg/L maximumIt passed with room to spare, and everything else tested sat further below its limit. See every reading
  • Very hard water at 264 mg/LThe threshold for very hard is 250 mg/L. Expect visible limescale on taps and in kettles in BA13. How hardness is measured

Questions about BA13 water

Is BA13 tap water safe to drink?

Based on the latest tests, BA13 (Wiltshire) water scores 8.8/10, which is safe. 0 of 23 tested contaminants exceeded recommended levels. Water is supplied by Thames Water.

What contaminants are in BA13 water?

We tested 23 contaminants in BA13 water. None exceeded recommended safe levels. PFAS (forever chemicals) were also measured in rivers and groundwater within 10 km, though not in the tap-water tests themselves.

Who supplies water in BA13?

BA13 (Wiltshire) is supplied by Thames Water. You can view their full profile and compliance data on our supplier page.

Is BA13 water hard or soft?

Water in BA13 (Wiltshire) has a hardness of 264 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in BA13?

BA13 water scored 8.8/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in BA13 water?

The tap-water tests we hold for BA13 do not include a PFAS result. Environment Agency monitoring found PFAS in 28 river and groundwater samples from 3 sites within 10 km of BA13, the highest being PFOA at 0.019 µg/L about 6.8 km away. These are environmental samples, not tests of tap water. The UK currently has no legal limit for PFAS in drinking water; the Drinking Water Inspectorate uses a 0.1 µg/L guideline for individual compounds. Reverse osmosis filters can reduce PFAS levels.

How clean is the river near BA13?

The Environment Agency rated the Bitham Bk - source to conf Biss Bk as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by organic pollution (bod), fish and insects and other small river life. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in BA13, which is treated before it reaches homes.

Keep reading

PFAS explainedHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near BA13

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
pH8.17 pHNone
Temperature11.9 °CNone
Conductivity600 µS/cmNone
Nitrate2.8 mg/L50 mg/L
Nitrite0.0072 mg/L0.5 mg/L
Phosphate0.083 mg/LNone
Dissolved Oxygen10.6 mg/LNone
Ammonia0.084 mg/L0.5 mg/L
Copper0.00179 mg/L2 mg/L
Zinc0.0153 mg/LNone

Get alerts for your area

We'll email you when water quality data changes for BA13.

Source: Thames Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from