Skip to main content
tapwater
England and Wales average 9.0

Tap water in SP2, WiltshireSafe to drink.Very hard.

Supplied by Thames Water. 71 samples, 23 substances, latest on 31 December 2025. Everything is inside the legal limit, and nothing comes close to it.

8.8 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 302 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 12-Cup Ready-Pour

ZeroWater 12-Cup Ready-Pour

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

What's in a glass of SP2 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrite came closest to a limit, at 52% of it. 16 of 19 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitManganese: 0.0006 mg/L, 1% of the 0.05 mg/L limitManganese1%Copper: 0.05 mg/L, 3% of the 2 mg/L limitCopper3%Boron: 0.03 mg/L, 3% of the 1 mg/L limitBoron3%Selenium: 0.0012 mg/L, 3% of the 0.04 mg/L limitSelenium3%Iron: 0.007 mg/L, 3% of the 0.2 mg/L limitIron3%Aluminium: 0.0082 mg/L, 4% of the 0.2 mg/L limitAluminium4%Chromium: 0.0025 mg/L, 5% of the 0.05 mg/L limitChromium5%Antimony: 0.0003 mg/L, 6% of the 0.005 mg/L limitAntimony6%Mercury: 0.00007 mg/L, 7% of the 0.001 mg/L limitMercury7%Arsenic: 0.0007 mg/L, 7% of the 0.01 mg/L limitArsenic7%Cadmium: 0.0004 mg/L, 8% of the 0.005 mg/L limitCadmium8%Colour: 1.8 mg/L Pt/Co, 9% of the 20 mg/L Pt/Co limitColour9%Bromate: 0.001 mg/L, 10% of the 0.01 mg/L limitBromate10%Fluoride: 0.16 mg/L, 11% of the 1.5 mg/L limitFluoride11%Trihalomethanes: 0.011 mg/L, 11% of the 0.1 mg/L limitTrihalomethanes11%Lead: 0.0012 mg/L, 12% of the 0.01 mg/L limitLead12%Nickel: 0.0051 mg/L, 25% of the 0.02 mg/L limitNickel25%Nitrate: 12.9 mg/L, 26% of the 50 mg/L limitNitrate26%Nitrite: 0.26 mg/L, 52% of the 0.5 mg/L limitNitrite52%
  1. Nitrite52%
  2. Nitrate26%
  3. Nickel25%
  4. Lead12%
  5. Trihalomethanes11%
  6. Fluoride11%
  7. Bromate10%
  8. Colour9%
  9. Cadmium8%
  10. Mercury7%
  11. Arsenic7%
  12. Antimony6%
  13. Chromium5%
  14. Aluminium4%
  15. Iron3%
  16. Boron3%
  17. Selenium3%
  18. Copper3%
  19. Manganese1%
  • Coliform Bacteria none found
  • E. coli none found
  • Conductivity 550 µS/cm
All 23 results as a table
SubstanceResultLegal limitShare of limit
Coliform Bacteria0 count/100mlMust be zeroNone found
E. coli0 count/100mlMust be zeroNone found
Colour1.8 mg/L Pt/Co20 mg/L Pt/Co
9%
Conductivity550 µS/cmNo legal limit–
Fluoride0.16 mg/L1.5 mg/L
11%
Nitrate12.9 mg/L50 mg/L
26%
Nitrite0.26 mg/L0.5 mg/L
52%
Hardness (as CaCO3)302 mg/LNo legal limit–
Aluminium0.0082 mg/L0.2 mg/L
4%
Antimony0.0003 mg/L0.005 mg/L
6%
Arsenic0.0007 mg/L0.01 mg/L
7%
Boron0.03 mg/L1 mg/L
3%
Cadmium0.0004 mg/L0.005 mg/L
8%
Chromium0.0025 mg/L0.05 mg/L
5%
Copper0.05 mg/L2 mg/L
3%
Iron0.007 mg/L0.2 mg/L
3%
Lead0.0012 mg/L0.01 mg/L
12%
Manganese0.0006 mg/L0.05 mg/L
1%
Mercury0.00007 mg/L0.001 mg/L
7%
Nickel0.0051 mg/L0.02 mg/L
25%
Selenium0.0012 mg/L0.04 mg/L
3%
Trihalomethanes0.011 mg/L0.1 mg/L
11%
Bromate0.001 mg/L0.01 mg/L
10%

302mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Softener quotes for SP2

Leave your details and we will email you when we can match you with installers who cover SP2. No obligation.

Request a free assessment and we'll come back to you with local installer options for your area.

SP2— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Nadder (Lower), rated good

The Environment Agency rated the Nadder (Lower) as good for ecological health in its 2025 assessment, meaning the river is only slightly changed from its natural state. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

SP2 in short

Tap water in SP2 (Wiltshire) is supplied by Thames Water in the Wiltshire Central zone and scores 8.8 out of 10, against an England and Wales average of 9.0. None of the 23 tested substances came close to a limit. The latest sample is from 31 December 2025.

  • Among the hardest water in the country at 302 mg/LVery hard starts at 250 mg/L. At this level kettles scale up within weeks and a softener is a normal purchase in SP2. How hardness is measured
  • 3rd cleanest of 19 areas tested in WiltshireOnly 2 areas in Wiltshire scored higher. The best is SN9 on 9.3.
  • Nitrite is the reading closest to its limit, at 52% of the 0.5 mg/L maximumIt passed with room to spare, and everything else tested sat further below its limit. See every reading

Questions about SP2 water

Is SP2 tap water safe to drink?

Based on the latest tests, SP2 (Wiltshire) water scores 8.8/10, which is safe. 0 of 23 tested contaminants exceeded recommended levels. Water is supplied by Thames Water.

What contaminants are in SP2 water?

We tested 23 contaminants in SP2 water. None exceeded recommended safe levels.

Who supplies water in SP2?

SP2 (Wiltshire) is supplied by Thames Water. You can view their full profile and compliance data on our supplier page.

Is SP2 water hard or soft?

Water in SP2 (Wiltshire) has a hardness of 302 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in SP2?

SP2 water scored 8.8/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in SP2 water?

No PFAS (forever chemicals) result is attached to the tap-water tests for SP2, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.

How clean is the river near SP2?

The Environment Agency rated the Nadder (Lower) as good for ecological health in its 2025 assessment, meaning the river is only slightly changed from its natural state. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in SP2, which is treated before it reaches homes.

Keep reading

How to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near SP2

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
pH7.98 pHNone
Temperature16.3 °CNone
Conductivity595 µS/cmNone
Nitrate6.7 mg/L50 mg/L
Nitrite0.015 mg/L0.5 mg/L
Phosphate0.071 mg/LNone
Dissolved Oxygen9.26 mg/LNone
Turbidity1.2 NTU4 NTU

Get alerts for your area

We'll email you when water quality data changes for SP2.

Source: Thames Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from