Skip to main content
tapwater
England and Wales average 9.2

Tap water in CR3, TandridgeSafe to drink.Hard.

Supplied by SES Water. 5,102 samples, 17 substances, latest on 17 December 2024. Everything is inside the legal limit, and nothing comes close to it.

9.2 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 226 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 10-Cup Jug

ZeroWater 10-Cup Jug

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if CR3’s water changes

We check for supply incidents every fifteen minutes. If one affects CR3, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for CR3

What's in a glass of CR3 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrate came closest to a limit, at 67% of it. 16 of 17 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitCadmium: 0.00006 mg/L, 1% of the 0.005 mg/L limitCadmium1%Selenium: 0.00053 mg/L, 1% of the 0.04 mg/L limitSelenium1%Trihalomethanes: 0.0015 mg/L, 2% of the 0.1 mg/L limitTrihalomethanes2%Arsenic: 0.00015 mg/L, 1% of the 0.01 mg/L limitArsenic1%Chromium: 0.0008 mg/L, 2% of the 0.05 mg/L limitChromium2%Antimony: 0.00009 mg/L, 2% of the 0.005 mg/L limitAntimony2%Iron: 0.006 mg/L, 3% of the 0.2 mg/L limitIron3%Colour: 0.6 mg/L Pt/Co, 3% of the 20 mg/L Pt/Co limitColour3%Lead: 0.0003 mg/L, 3% of the 0.01 mg/L limitLead3%Manganese: 0.0017 mg/L, 3% of the 0.05 mg/L limitManganese3%Turbidity: 0.17 NTU, 4% of the 4 NTU limitTurbidity4%Boron: 0.044 mg/L, 4% of the 1 mg/L limitBoron4%Nickel: 0.0009 mg/L, 5% of the 0.02 mg/L limitNickel5%Copper: 0.094 mg/L, 5% of the 2 mg/L limitCopper5%Aluminium: 0.017 mg/L, 9% of the 0.2 mg/L limitAluminium9%Nitrite: 0.094 mg/L, 19% of the 0.5 mg/L limitNitrite19%Nitrate: 33.4 mg/L, 67% of the 50 mg/L limitNitrate67%
  1. Nitrate67%
  2. Nitrite19%
  3. Aluminium9%
  4. Copper5%
  5. Nickel5%
  6. Boron4%
  7. Turbidity4%
  8. Manganese3%
  9. Iron3%
  10. Colour3%
  11. Lead3%
  12. Antimony2%
  13. Chromium2%
  14. Trihalomethanes2%
  15. Arsenic1%
  16. Selenium1%
  17. Cadmium1%
All 17 results as a table
SubstanceResultLegal limitShare of limit
Iron0.006 mg/L0.2 mg/L
3%
Turbidity0.17 NTU4 NTU
4%
Colour0.6 mg/L Pt/Co20 mg/L Pt/Co
3%
Aluminium0.017 mg/L0.2 mg/L
9%
Nitrite0.094 mg/L0.5 mg/L
19%
Nitrate33.4 mg/L50 mg/L
67%
Manganese0.0017 mg/L0.05 mg/L
3%
Trihalomethanes0.0015 mg/L0.1 mg/L
2%
Selenium0.00053 mg/L0.04 mg/L
1%
Antimony0.00009 mg/L0.005 mg/L
2%
Lead0.0003 mg/L0.01 mg/L
3%
Nickel0.0009 mg/L0.02 mg/L
5%
Chromium0.0008 mg/L0.05 mg/L
2%
Cadmium0.00006 mg/L0.005 mg/L
1%
Arsenic0.00015 mg/L0.01 mg/L
1%
Copper0.094 mg/L2 mg/L
5%
Boron0.044 mg/L1 mg/L
4%

226mg of limescale minerals in every litre, typical for the CR area. CR3 has no reading of its own.

This is the water that furs up kettles

Hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Over 200 mg/L, the building regulations guidance for England counts this as a hard water area: a new combination boiler or water heater should have limescale protection. The 200 ppm rule

Softener quotes for CR3

Leave your details and we will email you when we can match you with installers who cover CR3. No obligation.

A fitted softener typically costs £1,195 to £2,900. Prices by brand, with sources. Request a free assessment and we'll come back to you with local installer options for your area.

CR3— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Wandle (Croydon to Wandsworth) and the Graveney, rated moderate

The Environment Agency rated the Wandle (Croydon to Wandsworth) and the Graveney as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by phosphate and fish. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

CR3 in short

Tap water in CR3 (Tandridge) is supplied by SES Water and scores 9.2 out of 10, against an England and Wales average of 9.2. None of the 17 tested substances came close to a limit. The latest sample is from 17 December 2024.

  • Nitrate is the reading closest to its limit, at 67% of the 50 mg/L maximumIt passed with room to spare, and everything else tested sat further below its limit. See every reading
  • Hard water at 226 mg/LHard starts at 180 mg/L, the point where a softener begins to pay for itself. Limescale will build up across the CR postcode area. How hardness is measured
  • 2nd cleanest of 5 areas tested in TandridgeOnly 1 area in Tandridge scored higher. The best is CR6 on 9.3.

Questions about CR3 water

Is CR3 tap water safe to drink?

Based on the latest tests, CR3 (Tandridge) water scores 9.2/10, which is safe. 0 of 17 tested contaminants exceeded recommended levels. Water is supplied by SES Water.

What contaminants are in CR3 water?

We tested 17 contaminants in CR3 water. None exceeded recommended safe levels.

Who supplies water in CR3?

CR3 (Tandridge) is supplied by SES Water. You can view their full profile and compliance data on our supplier page.

Is CR3 water hard or soft?

No hardness reading has been published for CR3 itself. Across the CR postcode area the typical value is 226 mg/L CaCO3, which is classified as hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in CR3?

CR3 water scored 9.2/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in CR3 water?

No PFAS (forever chemicals) result is attached to the tap-water tests for CR3, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.

How clean is the river near CR3?

The Environment Agency rated the Wandle (Croydon to Wandsworth) and the Graveney as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by phosphate and fish. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in CR3, which is treated before it reaches homes.

Keep reading

Boiling water taps and hard waterHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near CR3

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
Lead0.00003 mg/L0.01 mg/L
Zinc0.00069 mg/LNone
Nickel0.0015 mg/L0.02 mg/L
Manganese0.00049 mg/L0.05 mg/L
Copper0.0001 mg/L2 mg/L
Arsenic0.0035 mg/L0.01 mg/L
Dissolved Oxygen10.3 mg/LNone
pH8.9 pHNone
Temperature11.4 °CNone
Conductivity161 µS/cmNone
Hardness (as CaCO3)37.8 mg/LNone
Iron0.074 mg/L0.2 mg/L
Chromium0.000889 mg/L0.05 mg/L

Source: SES Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from