Skip to main content
tapwater
England and Wales average 9.0

Tap water in RH2, Reigate and BansteadSafe to drink.Very hard.

Supplied by Thames Water. 74 samples, 23 substances, latest on 31 December 2025. Everything is inside the legal limit. One result, nitrite, sits close to the line.

8.8 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 204 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

Waterdrop G3P600 Reverse Osmosis

Waterdrop G3P600 Reverse Osmosis

£550typical price

Maximum contaminant removal including PFAS and fluoride

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

What's in a glass of RH2 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrite came closest to a limit, at 90% of it. 17 of 19 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitManganese: 0.0006 mg/L, 1% of the 0.05 mg/L limitManganese1%Selenium: 0.0007 mg/L, 2% of the 0.04 mg/L limitSelenium2%Boron: 0.03 mg/L, 3% of the 1 mg/L limitBoron3%Iron: 0.008 mg/L, 4% of the 0.2 mg/L limitIron4%Aluminium: 0.0082 mg/L, 4% of the 0.2 mg/L limitAluminium4%Chromium: 0.0025 mg/L, 5% of the 0.05 mg/L limitChromium5%Nickel: 0.0011 mg/L, 6% of the 0.02 mg/L limitNickel6%Antimony: 0.0003 mg/L, 6% of the 0.005 mg/L limitAntimony6%Mercury: 0.00007 mg/L, 7% of the 0.001 mg/L limitMercury7%Arsenic: 0.0007 mg/L, 7% of the 0.01 mg/L limitArsenic7%Fluoride: 0.12 mg/L, 8% of the 1.5 mg/L limitFluoride8%Cadmium: 0.0004 mg/L, 8% of the 0.005 mg/L limitCadmium8%Colour: 1.8 mg/L Pt/Co, 9% of the 20 mg/L Pt/Co limitColour9%Copper: 0.2 mg/L, 10% of the 2 mg/L limitCopper10%Lead: 0.001 mg/L, 10% of the 0.01 mg/L limitLead10%Bromate: 0.001 mg/L, 10% of the 0.01 mg/L limitBromate10%Trihalomethanes: 0.024 mg/L, 24% of the 0.1 mg/L limitTrihalomethanes24%Nitrate: 22.5 mg/L, 45% of the 50 mg/L limitNitrate45%Nitrite: 0.45 mg/L, 90% of the 0.5 mg/L limitNitrite90%
  1. Nitrite90%
  2. Nitrate45%
  3. Trihalomethanes24%
  4. Copper10%
  5. Lead10%
  6. Bromate10%
  7. Colour9%
  8. Fluoride8%
  9. Cadmium8%
  10. Mercury7%
  11. Arsenic7%
  12. Antimony6%
  13. Nickel6%
  14. Chromium5%
  15. Aluminium4%
  16. Iron4%
  17. Boron3%
  18. Selenium2%
  19. Manganese1%
  • Coliform Bacteria none found
  • E. coli none found
  • Conductivity 434 µS/cm
All 23 results as a table
SubstanceResultLegal limitShare of limit
Nitrite0.45 mg/L0.5 mg/L
90%
Coliform Bacteria0 count/100mlMust be zeroNone found
E. coli0 count/100mlMust be zeroNone found
Colour1.8 mg/L Pt/Co20 mg/L Pt/Co
9%
Conductivity434 µS/cmNo legal limit–
Fluoride0.12 mg/L1.5 mg/L
8%
Nitrate22.5 mg/L50 mg/L
45%
Hardness (as CaCO3)204 mg/LNo legal limit–
Aluminium0.0082 mg/L0.2 mg/L
4%
Antimony0.0003 mg/L0.005 mg/L
6%
Arsenic0.0007 mg/L0.01 mg/L
7%
Boron0.03 mg/L1 mg/L
3%
Cadmium0.0004 mg/L0.005 mg/L
8%
Chromium0.0025 mg/L0.05 mg/L
5%
Copper0.2 mg/L2 mg/L
10%
Iron0.008 mg/L0.2 mg/L
4%
Lead0.001 mg/L0.01 mg/L
10%
Manganese0.0006 mg/L0.05 mg/L
1%
Mercury0.00007 mg/L0.001 mg/L
7%
Nickel0.0011 mg/L0.02 mg/L
6%
Selenium0.0007 mg/L0.04 mg/L
2%
Trihalomethanes0.024 mg/L0.1 mg/L
24%
Bromate0.001 mg/L0.01 mg/L
10%

204mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Softener quotes for RH2

Leave your details and we will email you when we can match you with installers who cover RH2. No obligation.

Request a free assessment and we'll come back to you with local installer options for your area.

RH2— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Mole - Horley to Dorking, rated bad

The Environment Agency rated the Mole - Horley to Dorking as bad for ecological health in its 2025 assessment, meaning the river is severely damaged, with most of the expected wildlife missing. It is held back by insects and other small river life, phosphate and water plants and algae. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. Its ecological rating has dropped since the previous assessment.

None of this is a test of your tap water. Environment Agency record · River health across England

RH2 in short

Tap water in RH2 (Reigate and Banstead) is supplied by Thames Water in the Reigate and Banstead Central zone and scores 8.8 out of 10, against an England and Wales average of 9.0. 1 of 23 tested substances was close to or over a limit. The latest sample is from 31 December 2025.

  • Nitrite is within its legal limit but flagged, at 90% of the 0.5 mg/L maximumAnything over three quarters of a limit is flagged here as worth watching. It has not gone over. See every reading
  • Hard water at 204 mg/LHard starts at 180 mg/L, the point where a softener begins to pay for itself. Limescale will build up in RH2. How hardness is measured
  • 3rd cleanest of 5 areas tested in Reigate and BansteadSquarely mid-table for Reigate and Banstead, between RH6 on 9.3 and SM7 on 7.8.

Questions about RH2 water

Is RH2 tap water safe to drink?

Based on the latest tests, RH2 (Reigate and Banstead) water scores 8.8/10, which is safe. 1 of 23 tested contaminants exceeded recommended levels. Water is supplied by Thames Water.

What contaminants are in RH2 water?

We tested 23 contaminants in RH2 water. 1 were flagged, including Nitrite.

Who supplies water in RH2?

RH2 (Reigate and Banstead) is supplied by Thames Water. You can view their full profile and compliance data on our supplier page.

Is RH2 water hard or soft?

Water in RH2 (Reigate and Banstead) has a hardness of 204 mg/L CaCO3, which is classified as hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in RH2?

With 1 contaminant above recommended levels in RH2, a water filter could help. A filter jug or under-sink filter can reduce most common contaminants. See our filter recommendations for your area.

Are there PFAS forever chemicals in RH2 water?

No PFAS (forever chemicals) result is attached to the tap-water tests for RH2, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.

How clean is the river near RH2?

The Environment Agency rated the Mole - Horley to Dorking as bad for ecological health in its 2025 assessment, meaning the river is severely damaged, with most of the expected wildlife missing. It is held back by insects and other small river life, phosphate and water plants and algae. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. Its ecological rating has dropped since the previous assessment. This is a rating of the river, not of tap water in RH2, which is treated before it reaches homes.

Keep reading

Nitrate levelsHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near RH2

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
Turbidity4.7 NTU4 NTU
pH7.38 pHNone
Temperature17.9 °CNone
Conductivity576 µS/cmNone
Ammonia0.036 mg/L0.5 mg/L
Nitrate11 mg/L50 mg/L
Nitrite0.034 mg/L0.5 mg/L
Phosphate0.32 mg/LNone
Dissolved Oxygen7.14 mg/LNone

Get alerts for your area

We'll email you when water quality data changes for RH2.

Source: Thames Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from