Skip to main content
tapwater
England and Wales average 9.2

Tap water in S75, BarnsleySafe to drink.Moderately soft.

Supplied by Yorkshire Water. 1,433 samples, 25 substances, latest on 11 November 2026. Everything is inside the legal limit, and nothing comes close to it.

9.6 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

ZeroWater 10-Cup Jug

ZeroWater 10-Cup Jug

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

BRITA Marella XL + MAXTRA PRO

BRITA Marella XL + MAXTRA PRO

£25typical price

Basic chlorine and taste improvement on a budget

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if S75’s water changes

We check for supply incidents every fifteen minutes. If one affects S75, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for S75

What's in a glass of S75 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Trihalomethanes came closest to a limit, at 37% of it. 19 of 20 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitCopper: 0.00116 mg/L, <1% of the 2 mg/L limitCopper<1%Chromium: 0.00019 mg/L, <1% of the 0.05 mg/L limitChromium<1%Cadmium: 0.000031 mg/L, <1% of the 0.005 mg/L limitCadmium<1%Lead: 0.00009 mg/L, <1% of the 0.01 mg/L limitLead<1%Antimony: 0.000052 mg/L, 1% of the 0.005 mg/L limitAntimony1%Selenium: 0.00043 mg/L, 1% of the 0.04 mg/L limitSelenium1%Boron: 0.0113 mg/L, 1% of the 1 mg/L limitBoron1%Nitrite: 0.008 mg/L, 2% of the 0.5 mg/L limitNitrite2%Manganese: 0.00101 mg/L, 2% of the 0.05 mg/L limitManganese2%Arsenic: 0.00023 mg/L, 2% of the 0.01 mg/L limitArsenic2%Nickel: 0.00051 mg/L, 3% of the 0.02 mg/L limitNickel3%Bromate: 0.0003 mg/L, 3% of the 0.01 mg/L limitBromate3%Turbidity: 0.16 NTU, 4% of the 4 NTU limitTurbidity4%Mercury: 0.00004 mg/L, 4% of the 0.001 mg/L limitMercury4%Iron: 0.00896 mg/L, 4% of the 0.2 mg/L limitIron4%Fluoride: 0.07 mg/L, 5% of the 1.5 mg/L limitFluoride5%Aluminium: 0.0111 mg/L, 6% of the 0.2 mg/L limitAluminium6%Nitrate: 3.73 mg/L, 7% of the 50 mg/L limitNitrate7%Colour: 2 mg/L Pt/Co, 10% of the 20 mg/L Pt/Co limitColour10%Trihalomethanes: 0.0374 mg/L, 37% of the 0.1 mg/L limitTrihalomethanes37%
  1. Trihalomethanes37%
  2. Colour10%
  3. Nitrate7%
  4. Aluminium6%
  5. Fluoride5%
  6. Iron4%
  7. Turbidity4%
  8. Mercury4%
  9. Bromate3%
  10. Nickel3%
  11. Arsenic2%
  12. Manganese2%
  13. Nitrite2%
  14. Boron1%
  15. Selenium1%
  16. Antimony1%
  17. Lead<1%
  18. Cadmium<1%
  19. Chromium<1%
  20. Copper<1%
  • Conductivity 505 µS/cm
  • E. coli none found
  • Phosphate 0 mg/L
  • Coliform Bacteria none found
All 25 results as a table
SubstanceResultLegal limitShare of limit
Trihalomethanes0.0374 mg/L0.1 mg/L
37%
Manganese0.00101 mg/L0.05 mg/L
2%
Conductivity505 µS/cmNo legal limit–
E. coli0 count/100mlMust be zeroNone found
Turbidity0.16 NTU4 NTU
4%
Aluminium0.0111 mg/L0.2 mg/L
6%
Copper0.00116 mg/L2 mg/L
<1%
Phosphate0 mg/LNo legal limit–
Iron0.00896 mg/L0.2 mg/L
4%
Colour2 mg/L Pt/Co20 mg/L Pt/Co
10%
Mercury0.00004 mg/L0.001 mg/L
4%
Coliform Bacteria0 count/100mlMust be zeroNone found
Nitrate3.73 mg/L50 mg/L
7%
Nickel0.00051 mg/L0.02 mg/L
3%
Hardness (as CaCO3)64.4 mg/LNo legal limit–
Fluoride0.07 mg/L1.5 mg/L
5%
Cadmium0.000031 mg/L0.005 mg/L
<1%
Selenium0.00043 mg/L0.04 mg/L
1%
Nitrite0.008 mg/L0.5 mg/L
2%
Lead0.00009 mg/L0.01 mg/L
<1%
Antimony0.000052 mg/L0.005 mg/L
1%
Boron0.0113 mg/L1 mg/L
1%
Chromium0.00019 mg/L0.05 mg/L
<1%
Bromate0.0003 mg/L0.01 mg/L
3%
Arsenic0.00023 mg/L0.01 mg/L
2%

115mg of limescale minerals in every litre

Soft water. Kind to kettles, boilers and skin

You will not need a softener here, and you will use less soap and detergent than most of England.

Soft400 mg/L
Outside your tap

Your river is the Dearne from Cawthorne Dyke to Lundwood STW, rated moderate

The Environment Agency rated the Dearne from Cawthorne Dyke to Lundwood STW as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by phosphate, insects and other small river life and water plants and algae. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

Within 10 km

19

forever-chemical detections in nearby rivers and groundwater

At 1 site. The highest was PFOS (total) at 0.01 µg/L, at SSN0261 Clough Dike Trib of Dakin Brook, 8.4 km away, in December 2025. These are river and borehole samples, not tests of your tap water.

Every PFAS sample around Huddersfield · Which filters remove PFAS · PFAS explained

S75 in short

Tap water in S75 (Barnsley) is supplied by Yorkshire Water and scores 9.6 out of 10, against an England and Wales average of 9.2. None of the 25 tested substances came close to a limit. The latest sample is from 11 November 2026.

  • The cleanest tap water of the 8 areas tested in BarnsleyS75 scores 9.6 out of 10, ahead of S36 in second place on 9.5.
  • Scores higher than all 7 neighbouring districtsThe nearest rival is S36 on 9.5, against 9.6 here. Compare with S36
  • PFAS found at 1 monitoring site within 10 kmThose are river and groundwater samples, not tap water. The highest was PFOS (total) about 8.4 km away. What was measured

Questions about S75 water

Is S75 tap water safe to drink?

Based on the latest tests, S75 (Barnsley) water scores 9.6/10, which is safe. 0 of 25 tested contaminants exceeded recommended levels. Water is supplied by Yorkshire Water.

What contaminants are in S75 water?

We tested 25 contaminants in S75 water. None exceeded recommended safe levels. PFAS (forever chemicals) were also measured in rivers and groundwater within 10 km, though not in the tap-water tests themselves.

Who supplies water in S75?

S75 (Barnsley) is supplied by Yorkshire Water. You can view their full profile and compliance data on our supplier page.

Is S75 water hard or soft?

Water in S75 (Barnsley) has a hardness of 115 mg/L CaCO3, which is classified as moderately soft. This is a moderate hardness level.

Should I use a water filter in S75?

S75 water scored 9.6/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in S75 water?

The tap-water tests we hold for S75 do not include a PFAS result. Environment Agency monitoring found PFAS in 19 river and groundwater samples from 1 sites within 10 km of S75, the highest being PFOS (total) at 0.01 µg/L about 8.4 km away. These are environmental samples, not tests of tap water. The UK currently has no legal limit for PFAS in drinking water; the Drinking Water Inspectorate uses a 0.1 µg/L guideline for individual compounds. Reverse osmosis filters can reduce PFAS levels.

How clean is the river near S75?

The Environment Agency rated the Dearne from Cawthorne Dyke to Lundwood STW as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by phosphate, insects and other small river life and water plants and algae. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in S75, which is treated before it reaches homes.

Keep reading

PFAS explainedHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near S75

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
pH7.97 pHNone
Temperature11.5 °CNone
Conductivity770 µS/cmNone
Ammonia0.052 mg/L0.5 mg/L
Nitrate11 mg/L50 mg/L
Nitrite0.014 mg/L0.5 mg/L
Phosphate0.08 mg/LNone
Dissolved Oxygen10.3 mg/LNone
Copper0.0036 mg/L2 mg/L
Zinc0.0372 mg/LNone

Source: Yorkshire Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from