Skip to main content
tapwater
England and Wales average 9.0

Tap water in S63, BarnsleySafe to drink.Very hard.

Supplied by Yorkshire Water. 479 samples, 22 substances, latest on 30 September 2026. Everything is inside the legal limit, and nothing comes close to it.

9.4 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 235 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 12-Cup Ready-Pour

ZeroWater 12-Cup Ready-Pour

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

What's in a glass of S63 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrate came closest to a limit, at 39% of it. 16 of 17 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitCopper: 0.00099 mg/L, <1% of the 2 mg/L limitCopper<1%Chromium: 0.00019 mg/L, <1% of the 0.05 mg/L limitChromium<1%Cadmium: 0.000031 mg/L, <1% of the 0.005 mg/L limitCadmium<1%Selenium: 0.00043 mg/L, 1% of the 0.04 mg/L limitSelenium1%Nitrite: 0.008 mg/L, 2% of the 0.5 mg/L limitNitrite2%Arsenic: 0.00019 mg/L, 2% of the 0.01 mg/L limitArsenic2%Antimony: 0.000121 mg/L, 2% of the 0.005 mg/L limitAntimony2%Lead: 0.00027 mg/L, 3% of the 0.01 mg/L limitLead3%Turbidity: 0.11 NTU, 3% of the 4 NTU limitTurbidity3%Manganese: 0.00178 mg/L, 4% of the 0.05 mg/L limitManganese4%Iron: 0.00928 mg/L, 5% of the 0.2 mg/L limitIron5%Nickel: 0.00108 mg/L, 5% of the 0.02 mg/L limitNickel5%Aluminium: 0.0113 mg/L, 6% of the 0.2 mg/L limitAluminium6%Bromate: 0.0007 mg/L, 7% of the 0.01 mg/L limitBromate7%Colour: 3 mg/L Pt/Co, 15% of the 20 mg/L Pt/Co limitColour15%Trihalomethanes: 0.0224 mg/L, 22% of the 0.1 mg/L limitTrihalomethanes22%Nitrate: 19.7 mg/L, 39% of the 50 mg/L limitNitrate39%
  1. Nitrate39%
  2. Trihalomethanes22%
  3. Colour15%
  4. Bromate7%
  5. Aluminium6%
  6. Nickel5%
  7. Iron5%
  8. Manganese4%
  9. Turbidity3%
  10. Lead3%
  11. Antimony2%
  12. Arsenic2%
  13. Nitrite2%
  14. Selenium1%
  15. Cadmium<1%
  16. Chromium<1%
  17. Copper<1%
  • Coliform Bacteria none found
  • E. coli none found
  • Conductivity 601 µS/cm
  • Phosphate 0 mg/L
All 22 results as a table
SubstanceResultLegal limitShare of limit
Coliform Bacteria0 count/100mlMust be zeroNone found
E. coli0 count/100mlMust be zeroNone found
Bromate0.0007 mg/L0.01 mg/L
7%
Cadmium0.000031 mg/L0.005 mg/L
<1%
Manganese0.00178 mg/L0.05 mg/L
4%
Copper0.00099 mg/L2 mg/L
<1%
Turbidity0.11 NTU4 NTU
3%
Colour3 mg/L Pt/Co20 mg/L Pt/Co
15%
Conductivity601 µS/cmNo legal limit–
Chromium0.00019 mg/L0.05 mg/L
<1%
Nickel0.00108 mg/L0.02 mg/L
5%
Trihalomethanes0.0224 mg/L0.1 mg/L
22%
Antimony0.000121 mg/L0.005 mg/L
2%
Arsenic0.00019 mg/L0.01 mg/L
2%
Selenium0.00043 mg/L0.04 mg/L
1%
Iron0.00928 mg/L0.2 mg/L
5%
Aluminium0.0113 mg/L0.2 mg/L
6%
Lead0.00027 mg/L0.01 mg/L
3%
Nitrite0.008 mg/L0.5 mg/L
2%
Nitrate19.7 mg/L50 mg/L
39%
Phosphate0 mg/LNo legal limit–
Hardness (as CaCO3)231 mg/LNo legal limit–

235mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Softener quotes for S63

Leave your details and we will email you when we can match you with installers who cover S63. No obligation.

Request a free assessment and we'll come back to you with local installer options for your area.

S63— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Dearne Darfield STW to River Don, rated moderate

The Environment Agency rated the Dearne Darfield STW to River Don as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by fish, phosphate and insects and other small river life. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

Within 10 km

12

forever-chemical detections in nearby rivers and groundwater

At 1 site. The highest was PFBS at 0.0093 µg/L, at RSN1844 River Don at Eastwood Lock, 8.4 km away, in June 2024. These are river and borehole samples, not tests of your tap water.

Every PFAS sample around Sheffield · Which filters remove PFAS · PFAS explained

S63 in short

Tap water in S63 (Barnsley) is supplied by Yorkshire Water in the Barnsley Central zone and scores 9.4 out of 10, against an England and Wales average of 9.0. None of the 22 tested substances came close to a limit. The latest sample is from 30 September 2026.

  • Hard water at 235 mg/LHard starts at 180 mg/L, the point where a softener begins to pay for itself. Limescale will build up in S63. How hardness is measured
  • 4th cleanest of 8 areas tested in BarnsleySquarely mid-table for Barnsley, between S36 on 9.7 and S73 on 9.
  • PFAS found at 1 monitoring site within 10 kmThose are river and groundwater samples, not tap water. The highest was PFBS about 8.4 km away. What was measured

Questions about S63 water

Is S63 tap water safe to drink?

Based on the latest tests, S63 (Barnsley) water scores 9.4/10, which is safe. 0 of 22 tested contaminants exceeded recommended levels. Water is supplied by Yorkshire Water.

What contaminants are in S63 water?

We tested 22 contaminants in S63 water. None exceeded recommended safe levels. PFAS (forever chemicals) were also measured in rivers and groundwater within 10 km, though not in the tap-water tests themselves.

Who supplies water in S63?

S63 (Barnsley) is supplied by Yorkshire Water. You can view their full profile and compliance data on our supplier page.

Is S63 water hard or soft?

Water in S63 (Barnsley) has a hardness of 235 mg/L CaCO3, which is classified as hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in S63?

S63 water scored 9.4/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in S63 water?

The tap-water tests we hold for S63 do not include a PFAS result. Environment Agency monitoring found PFAS in 12 river and groundwater samples from 1 sites within 10 km of S63, the highest being PFBS at 0.0093 µg/L about 8.4 km away. These are environmental samples, not tests of tap water. The UK currently has no legal limit for PFAS in drinking water; the Drinking Water Inspectorate uses a 0.1 µg/L guideline for individual compounds. Reverse osmosis filters can reduce PFAS levels.

How clean is the river near S63?

The Environment Agency rated the Dearne Darfield STW to River Don as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by fish, phosphate and insects and other small river life. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in S63, which is treated before it reaches homes.

Keep reading

PFAS explainedHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near S63

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
pH7.54 pHNone
Nickel0.003 mg/L0.02 mg/L
Temperature7.8 °CNone
Conductivity952 µS/cmNone
Ammonia0.31 mg/L0.5 mg/L
Nitrate7.1 mg/L50 mg/L
Nitrite0.085 mg/L0.5 mg/L
Phosphate0.52 mg/LNone
Dissolved Oxygen10.9 mg/LNone
Copper0.0069 mg/L2 mg/L
Zinc0.0549 mg/LNone
Hardness (as CaCO3)346 mg/LNone

Get alerts for your area

We'll email you when water quality data changes for S63.

Source: Yorkshire Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from