Skip to main content
tapwater
England and Wales average 9.2

Tap water in S74, BarnsleySafe to drink.Very hard.

Supplied by Yorkshire Water. 656 samples, 25 substances, latest on 28 October 2026. Everything is inside the legal limit, and nothing comes close to it.

9.3 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 253 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 10-Cup Jug

ZeroWater 10-Cup Jug

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if S74’s water changes

We check for supply incidents every fifteen minutes. If one affects S74, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for S74

What's in a glass of S74 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Iron came closest to a limit, at 36% of it. 18 of 20 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitCopper: 0.00569 mg/L, <1% of the 2 mg/L limitCopper<1%Chromium: 0.00019 mg/L, <1% of the 0.05 mg/L limitChromium<1%Cadmium: 0.000031 mg/L, <1% of the 0.005 mg/L limitCadmium<1%Boron: 0.0079 mg/L, <1% of the 1 mg/L limitBoron<1%Lead: 0.00009 mg/L, <1% of the 0.01 mg/L limitLead<1%Antimony: 0.00005 mg/L, 1% of the 0.005 mg/L limitAntimony1%Selenium: 0.00043 mg/L, 1% of the 0.04 mg/L limitSelenium1%Arsenic: 0.00011 mg/L, 1% of the 0.01 mg/L limitArsenic1%Nitrite: 0.008 mg/L, 2% of the 0.5 mg/L limitNitrite2%Manganese: 0.00149 mg/L, 3% of the 0.05 mg/L limitManganese3%Turbidity: 0.13 NTU, 3% of the 4 NTU limitTurbidity3%Fluoride: 0.06 mg/L, 4% of the 1.5 mg/L limitFluoride4%Bromate: 0.0004 mg/L, 4% of the 0.01 mg/L limitBromate4%Mercury: 0.00004 mg/L, 4% of the 0.001 mg/L limitMercury4%Nickel: 0.00101 mg/L, 5% of the 0.02 mg/L limitNickel5%Aluminium: 0.0111 mg/L, 6% of the 0.2 mg/L limitAluminium6%Nitrate: 3.73 mg/L, 7% of the 50 mg/L limitNitrate7%Colour: 2 mg/L Pt/Co, 10% of the 20 mg/L Pt/Co limitColour10%Trihalomethanes: 0.0305 mg/L, 30% of the 0.1 mg/L limitTrihalomethanes30%Iron: 0.0725 mg/L, 36% of the 0.2 mg/L limitIron36%
  1. Iron36%
  2. Trihalomethanes30%
  3. Colour10%
  4. Nitrate7%
  5. Aluminium6%
  6. Nickel5%
  7. Fluoride4%
  8. Bromate4%
  9. Mercury4%
  10. Turbidity3%
  11. Manganese3%
  12. Nitrite2%
  13. Arsenic1%
  14. Selenium1%
  15. Antimony1%
  16. Lead<1%
  17. Boron<1%
  18. Cadmium<1%
  19. Chromium<1%
  20. Copper<1%
  • Coliform Bacteria none found
  • E. coli none found
  • Conductivity 171 µS/cm
  • Phosphate 1.26 mg/L
All 25 results as a table
SubstanceResultLegal limitShare of limit
Coliform Bacteria0 count/100mlMust be zeroNone found
E. coli0 count/100mlMust be zeroNone found
Trihalomethanes0.0305 mg/L0.1 mg/L
30%
Fluoride0.06 mg/L1.5 mg/L
4%
Turbidity0.13 NTU4 NTU
3%
Conductivity171 µS/cmNo legal limit–
Colour2 mg/L Pt/Co20 mg/L Pt/Co
10%
Bromate0.0004 mg/L0.01 mg/L
4%
Nitrite0.008 mg/L0.5 mg/L
2%
Nitrate3.73 mg/L50 mg/L
7%
Aluminium0.0111 mg/L0.2 mg/L
6%
Iron0.0725 mg/L0.2 mg/L
36%
Manganese0.00149 mg/L0.05 mg/L
3%
Boron0.0079 mg/L1 mg/L
<1%
Copper0.00569 mg/L2 mg/L
<1%
Nickel0.00101 mg/L0.02 mg/L
5%
Chromium0.00019 mg/L0.05 mg/L
<1%
Cadmium0.000031 mg/L0.005 mg/L
<1%
Mercury0.00004 mg/L0.001 mg/L
4%
Lead0.00009 mg/L0.01 mg/L
<1%
Antimony0.00005 mg/L0.005 mg/L
1%
Selenium0.00043 mg/L0.04 mg/L
1%
Arsenic0.00011 mg/L0.01 mg/L
1%
Hardness (as CaCO3)315 mg/LNo legal limit–
Phosphate1.26 mg/LNo legal limit–

253mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Over 200 mg/L, the building regulations guidance for England counts this as a hard water area: a new combination boiler or water heater should have limescale protection. The 200 ppm rule

Softener quotes for S74

Leave your details and we will email you when we can match you with installers who cover S74. No obligation.

A fitted softener typically costs £1,195 to £2,900. Prices by brand, with sources. Request a free assessment and we'll come back to you with local installer options for your area.

S74— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Knoll Beck from Source to River Dearne, rated moderate

The Environment Agency rated the Knoll Beck from Source to River Dearne as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by insects and other small river life and phosphate. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

Within 10 km

40

forever-chemical detections in nearby rivers and groundwater

At 2 sites. The highest was PFOS (linear) at 0.012 µg/L, at Don at Halfpenny Bridge Templeborough, 9.6 km away, in December 2023. These are river and borehole samples, not tests of your tap water.

Every PFAS sample around Sheffield · Which filters remove PFAS · PFAS explained

S74 in short

Tap water in S74 (Barnsley) is supplied by Yorkshire Water and scores 9.3 out of 10, against an England and Wales average of 9.2. None of the 25 tested substances came close to a limit. The latest sample is from 28 October 2026.

  • Very hard water at 253 mg/LThe threshold for very hard is 250 mg/L. Expect visible limescale on taps and in kettles in S74. How hardness is measured
  • 5th cleanest of 8 areas tested in BarnsleySquarely mid-table for Barnsley, between S75 on 9.6 and S72 on 9.1.
  • PFAS found at 2 monitoring sites within 10 kmThose are river and groundwater samples, not tap water. The highest was PFOS (linear) about 9.6 km away. What was measured

Questions about S74 water

Is S74 tap water safe to drink?

Based on the latest tests, S74 (Barnsley) water scores 9.3/10, which is safe. 0 of 25 tested contaminants exceeded recommended levels. Water is supplied by Yorkshire Water.

What contaminants are in S74 water?

We tested 25 contaminants in S74 water. None exceeded recommended safe levels. PFAS (forever chemicals) were also measured in rivers and groundwater within 10 km, though not in the tap-water tests themselves.

Who supplies water in S74?

S74 (Barnsley) is supplied by Yorkshire Water. You can view their full profile and compliance data on our supplier page.

Is S74 water hard or soft?

Water in S74 (Barnsley) has a hardness of 253 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in S74?

S74 water scored 9.3/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in S74 water?

The tap-water tests we hold for S74 do not include a PFAS result. Environment Agency monitoring found PFAS in 40 river and groundwater samples from 2 sites within 10 km of S74, the highest being PFOS (linear) at 0.012 µg/L about 9.6 km away. These are environmental samples, not tests of tap water. The UK currently has no legal limit for PFAS in drinking water; the Drinking Water Inspectorate uses a 0.1 µg/L guideline for individual compounds. Reverse osmosis filters can reduce PFAS levels.

How clean is the river near S74?

The Environment Agency rated the Knoll Beck from Source to River Dearne as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by insects and other small river life and phosphate. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in S74, which is treated before it reaches homes.

Keep reading

PFAS explainedBoiling water taps and hard waterHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near S74

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
Ammonia0.378 mg/L0.5 mg/L
pH7.72 pHNone
Cadmium0.000021 mg/L0.005 mg/L
Temperature6.6 °CNone
Conductivity649 µS/cmNone
Dissolved Oxygen11.7 mg/LNone
Iron0.036 mg/L0.2 mg/L
Phosphate0.205 mg/LNone
Lead0.002 mg/L0.01 mg/L
Nitrate1.81 mg/L50 mg/L
Nitrite0.0313 mg/L0.5 mg/L
Chromium0.001 mg/L0.05 mg/L
Zinc0.0197 mg/LNone
Arsenic0.001 mg/L0.01 mg/L
Copper0.0036 mg/L2 mg/L
Nickel0.0053 mg/L0.02 mg/L
Boron0.113 mg/L1 mg/L

Source: Yorkshire Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from