Skip to main content
tapwater
England and Wales average 9.2

Tap water in SL6, Windsor and MaidenheadTurbidity is over the limit.Very hard.

Supplied by South East Water. 15 substances, latest on 10 November 2026. Turbidity came in above the legal limit. Everything else passed.

7.8 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

BWT E1 Single Lever

BWT E1 Single Lever

£250typical price

Removes turbidity, the result that stood out in SL6.

Stop the limescale

At 334 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

Osmio PRO-III Ultimate Whole House

£499typical price

Removes turbidity, the result that stood out in SL6.

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if SL6’s water changes

We check for supply incidents every fifteen minutes. If one affects SL6, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for SL6

What's in a glass of SL6 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Turbidity is over its legal limit, at 170% of it.

0%25%50%75%limitLegal limitCopper: 0.0054 mg/L, <1% of the 2 mg/L limitCopper<1%Nitrite: 0.042 mg/L, 8% of the 0.5 mg/L limitNitrite8%Lead: 0.0013 mg/L, 13% of the 0.01 mg/L limitLead13%Nickel: 0.0029 mg/L, 14% of the 0.02 mg/L limitNickel14%Nitrate: 8.9 mg/L, 18% of the 50 mg/L limitNitrate18%Ammonia: 0.11 mg/L, 22% of the 0.5 mg/L limitAmmonia22%Manganese: 0.017 mg/L, 34% of the 0.05 mg/L limitManganese34%Iron: 0.091 mg/L, 45% of the 0.2 mg/L limitIron45%Turbidity: 6.8 NTU, 170% of the 4 NTU limitTurbidity170%
  1. Turbidity170%
  2. Iron45%
  3. Manganese34%
  4. Ammonia22%
  5. Nitrate18%
  6. Nickel14%
  7. Lead13%
  8. Nitrite8%
  9. Copper<1%
  • pH 7.87 pH
  • Temperature 10.1 °C
  • Conductivity 734 µS/cm
  • Phosphate 0.19 mg/L
  • Dissolved Oxygen 10.9 mg/L
  • Zinc 0.0094 mg/L
All 15 results as a table
SubstanceResultLegal limitShare of limit
Turbidity6.8 NTU4 NTU
170%
pH7.87 pHNo legal limit–
Temperature10.1 °CNo legal limit–
Conductivity734 µS/cmNo legal limit–
Ammonia0.11 mg/L0.5 mg/L
22%
Nitrate8.9 mg/L50 mg/L
18%
Nitrite0.042 mg/L0.5 mg/L
8%
Phosphate0.19 mg/LNo legal limit–
Dissolved Oxygen10.9 mg/LNo legal limit–
Lead0.0013 mg/L0.01 mg/L
13%
Zinc0.0094 mg/LNo legal limit–
Nickel0.0029 mg/L0.02 mg/L
14%
Copper0.0054 mg/L2 mg/L
<1%
Manganese0.017 mg/L0.05 mg/L
34%
Iron0.091 mg/L0.2 mg/L
45%

334mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Over 200 mg/L, the building regulations guidance for England counts this as a hard water area: a new combination boiler or water heater should have limescale protection. The 200 ppm rule

Softener quotes for SL6

Leave your details and we will email you when we can match you with installers who cover SL6. No obligation.

A fitted softener typically costs £1,195 to £2,900. Prices by brand, with sources. Request a free assessment and we'll come back to you with local installer options for your area.

SL6— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Maidenhead Ditch, rated moderate

The Environment Agency rated the Maidenhead Ditch as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by dissolved oxygen, phosphate and fish. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

SL6 in short

Tap water in SL6 (Windsor and Maidenhead) is supplied by South East Water (about 92% of postcodes; Thames Water supplies the rest). South East Water publishes no tap-water test results for this area, so the score of 7.8 out of 10 comes from 15 substances measured in rivers and groundwater nearby, not from the tap. Treat it as background. The hardness figure, 334 mg/L, is South East Water's own for this district. The latest sample is from 10 November 2026.

  • Turbidity was measured at 6.8 NTU, 70% over the UK limitIt is the only one of 15 tested substances to go over its limit. See the full results
  • The lowest score of the 3 areas tested in Windsor and MaidenheadSL6 scores 7.8 out of 10. The best in Windsor and Maidenhead, SL5, scores 9.
  • Among the hardest water in the country at 334 mg/LVery hard starts at 250 mg/L. At this level kettles scale up within weeks and a softener is a normal purchase in SL6. How hardness is measured

Questions about SL6 water

Is SL6 tap water safe to drink?

Based on the latest tests, SL6 (Windsor and Maidenhead) water scores 7.8/10, which is safe. 1 of 15 tested contaminants exceeded recommended levels. Water is supplied by South East Water.

What contaminants are in SL6 water?

We tested 15 contaminants in SL6 water. 1 were flagged, including Turbidity.

Who supplies water in SL6?

SL6 (Windsor and Maidenhead) is supplied by South East Water. You can view their full profile and compliance data on our supplier page.

Is SL6 water hard or soft?

Water in SL6 (Windsor and Maidenhead) has a hardness of 334 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in SL6?

With 1 contaminant above recommended levels in SL6, a water filter could help. A filter jug or under-sink filter can reduce most common contaminants. See our filter recommendations for your area.

Are there PFAS forever chemicals in SL6 water?

No PFAS (forever chemicals) result is attached to the tap-water tests for SL6, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.

How clean is the river near SL6?

The Environment Agency rated the Maidenhead Ditch as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by dissolved oxygen, phosphate and fish. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in SL6, which is treated before it reaches homes.