Skip to main content
tapwater
England and Wales average 9.2

Tap water in SL5, Windsor and MaidenheadSafe to drink.Very hard.

Supplied by Affinity Water. 697 samples, 24 substances, latest on 12 December 2025. Everything is inside the legal limit, and nothing comes close to it.

9.0 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 285 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 10-Cup Jug

ZeroWater 10-Cup Jug

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if SL5’s water changes

We check for supply incidents every fifteen minutes. If one affects SL5, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for SL5

What's in a glass of SL5 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrate came closest to a limit, at 70% of it. 19 of 21 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitManganese: 0.000363 mg/L, <1% of the 0.05 mg/L limitManganese<1%Chromium: 0.000383 mg/L, <1% of the 0.05 mg/L limitChromium<1%Selenium: 0.000352 mg/L, <1% of the 0.04 mg/L limitSelenium<1%Cadmium: 0.000054 mg/L, 1% of the 0.005 mg/L limitCadmium1%Nitrite: 0.01 mg/L, 2% of the 0.5 mg/L limitNitrite2%Mercury: 0.000023 mg/L, 2% of the 0.001 mg/L limitMercury2%Turbidity: 0.13 NTU, 3% of the 4 NTU limitTurbidity3%Iron: 0.00897 mg/L, 4% of the 0.2 mg/L limitIron4%Boron: 0.046 mg/L, 5% of the 1 mg/L limitBoron5%Antimony: 0.000307 mg/L, 6% of the 0.005 mg/L limitAntimony6%Lead: 0.000695 mg/L, 7% of the 0.01 mg/L limitLead7%Aluminium: 0.0169 mg/L, 8% of the 0.2 mg/L limitAluminium8%Arsenic: 0.000871 mg/L, 9% of the 0.01 mg/L limitArsenic9%Colour: 2 mg/L Pt/Co, 10% of the 20 mg/L Pt/Co limitColour10%Fluoride: 0.15 mg/L, 10% of the 1.5 mg/L limitFluoride10%Copper: 0.234 mg/L, 12% of the 2 mg/L limitCopper12%Ammonia: 0.06 mg/L, 12% of the 0.5 mg/L limitAmmonia12%Nickel: 0.00279 mg/L, 14% of the 0.02 mg/L limitNickel14%Bromate: 0.00147 mg/L, 15% of the 0.01 mg/L limitBromate15%Trihalomethanes: 0.0285 mg/L, 29% of the 0.1 mg/L limitTrihalomethanes29%Nitrate: 34.9 mg/L, 70% of the 50 mg/L limitNitrate70%
  1. Nitrate70%
  2. Trihalomethanes29%
  3. Bromate15%
  4. Nickel14%
  5. Ammonia12%
  6. Copper12%
  7. Colour10%
  8. Fluoride10%
  9. Arsenic9%
  10. Aluminium8%
  11. Lead7%
  12. Antimony6%
  13. Boron5%
  14. Iron4%
  15. Turbidity3%
  16. Mercury2%
  17. Nitrite2%
  18. Cadmium1%
  19. Selenium<1%
  20. Chromium<1%
  21. Manganese<1%
  • Coliform Bacteria none found
  • E. coli none found
  • Conductivity 575 µS/cm
All 24 results as a table
SubstanceResultLegal limitShare of limit
Colour2 mg/L Pt/Co20 mg/L Pt/Co
10%
Coliform Bacteria0 count/100mlMust be zeroNone found
Nitrate34.9 mg/L50 mg/L
70%
E. coli0 count/100mlMust be zeroNone found
Aluminium0.0169 mg/L0.2 mg/L
8%
Boron0.046 mg/L1 mg/L
5%
Turbidity0.13 NTU4 NTU
3%
Lead0.000695 mg/L0.01 mg/L
7%
Manganese0.000363 mg/L0.05 mg/L
<1%
Mercury0.000023 mg/L0.001 mg/L
2%
Ammonia0.06 mg/L0.5 mg/L
12%
Trihalomethanes0.0285 mg/L0.1 mg/L
29%
Iron0.00897 mg/L0.2 mg/L
4%
Arsenic0.000871 mg/L0.01 mg/L
9%
Conductivity575 µS/cmNo legal limit–
Bromate0.00147 mg/L0.01 mg/L
15%
Antimony0.000307 mg/L0.005 mg/L
6%
Chromium0.000383 mg/L0.05 mg/L
<1%
Nickel0.00279 mg/L0.02 mg/L
14%
Nitrite0.01 mg/L0.5 mg/L
2%
Copper0.234 mg/L2 mg/L
12%
Fluoride0.15 mg/L1.5 mg/L
10%
Cadmium0.000054 mg/L0.005 mg/L
1%
Selenium0.000352 mg/L0.04 mg/L
<1%

285mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Over 200 mg/L, the building regulations guidance for England counts this as a hard water area: a new combination boiler or water heater should have limescale protection. The 200 ppm rule

Softener quotes for SL5

Leave your details and we will email you when we can match you with installers who cover SL5. No obligation.

A fitted softener typically costs £1,195 to £2,900. Prices by brand, with sources. Request a free assessment and we'll come back to you with local installer options for your area.

SL5— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Chertsey Bourne (Ascot to Virginia Water), rated good

The Environment Agency rated the Chertsey Bourne (Ascot to Virginia Water) as good for ecological health in its 2025 assessment, meaning the river is only slightly changed from its natural state. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. Its ecological rating has improved since the previous assessment.

None of this is a test of your tap water. Environment Agency record · River health across England

Within 10 km

50

forever-chemical detections in nearby rivers and groundwater

At 1 site. The highest was PFPeA at 0.012 µg/L, at Cut at Pitts Bridge, Binfield, 8.2 km away, in June 2023. These are river and borehole samples, not tests of your tap water.

Every PFAS sample around Reading · Which filters remove PFAS · PFAS explained

SL5 in short

Tap water in SL5 (Windsor and Maidenhead) is supplied by Affinity Water and scores 9.0 out of 10, against an England and Wales average of 9.2. None of the 24 tested substances came close to a limit. The latest sample is from 12 December 2025.

  • The cleanest tap water of the 3 areas tested in Windsor and MaidenheadSL5 scores 9 out of 10, ahead of SL4 in second place on 8.8.
  • Nitrate is the reading closest to its limit, at 70% of the 50 mg/L maximumIt passed with room to spare, and everything else tested sat further below its limit. See every reading
  • Very hard water at 285 mg/LThe threshold for very hard is 250 mg/L. Expect visible limescale on taps and in kettles in SL5. How hardness is measured

Questions about SL5 water

Is SL5 tap water safe to drink?

Based on the latest tests, SL5 (Windsor and Maidenhead) water scores 9/10, which is safe. 0 of 24 tested contaminants exceeded recommended levels. Water is supplied by Affinity Water.

What contaminants are in SL5 water?

We tested 24 contaminants in SL5 water. None exceeded recommended safe levels. PFAS (forever chemicals) were also measured in rivers and groundwater within 10 km, though not in the tap-water tests themselves.

Who supplies water in SL5?

SL5 (Windsor and Maidenhead) is supplied by Affinity Water. You can view their full profile and compliance data on our supplier page.

Is SL5 water hard or soft?

Water in SL5 (Windsor and Maidenhead) has a hardness of 285 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in SL5?

SL5 water scored 9/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in SL5 water?

The tap-water tests we hold for SL5 do not include a PFAS result. Environment Agency monitoring found PFAS in 50 river and groundwater samples from 1 sites within 10 km of SL5, the highest being PFPeA at 0.012 µg/L about 8.2 km away. These are environmental samples, not tests of tap water. The UK currently has no legal limit for PFAS in drinking water; the Drinking Water Inspectorate uses a 0.1 µg/L guideline for individual compounds. Reverse osmosis filters can reduce PFAS levels.

How clean is the river near SL5?

The Environment Agency rated the Chertsey Bourne (Ascot to Virginia Water) as good for ecological health in its 2025 assessment, meaning the river is only slightly changed from its natural state. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. Its ecological rating has improved since the previous assessment. This is a rating of the river, not of tap water in SL5, which is treated before it reaches homes.

Keep reading

PFAS explainedBoiling water taps and hard waterHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near SL5

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
pH7.1 pHNone
Temperature7.6 °CNone
Conductivity601 µS/cmNone
Ammonia0.34 mg/L0.5 mg/L
Nitrate0.41 mg/L50 mg/L
Dissolved Oxygen11.4 mg/LNone
Nitrite0.026 mg/L0.5 mg/L
Phosphate0.013 mg/LNone
PFAS (total)0.0048 µg/LNone

Source: Affinity Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from