Tap water in SR6, SunderlandSafe to drink.Very hard.
Supplied by Northumbrian Water. 4,407 samples, 20 substances, latest on 17 December 2025. Everything is inside the legal limit, and nothing comes close to it.
9.7 / 10
The tank is as full as the score. The specks are the minerals that make water hard.
What to do about it
Hard water: compare softener quotes
At 413 mg/L a softener is the only thing that stops limescale. Filters do not soften water.
It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.
ZeroWater 12-Cup Ready-Pour
£40typical price
Households concerned about PFAS and heavy metals
Waterdrop 10UA Under Sink
£70typical price
High-volume under-sink filtration without RO complexity
We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money
What's in a glass of SR6 water
Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.
Fluoride came closest to a limit, at 16% of it. 18 of 18 substances used under a quarter of theirs.
- Fluoride16%
- Iron7%
- Aluminium6%
- Colour6%
- Turbidity5%
- Bromate5%
- Nickel4%
- Nitrate4%
- Antimony3%
- Selenium2%
- Chromium1%
- Nitrite1%
- Arsenic1%
- Manganese1%
- Boron1%
- Lead<1%
- Copper<1%
- Cadmium<1%
- pH 7.8 pH
- Conductivity 560 µS/cm
All 20 results as a table
| Substance | Result | Legal limit | Share of limit |
|---|---|---|---|
| pH | 7.8 pH | No legal limit | – |
| Manganese | 0.00056 mg/L | 0.05 mg/L | 1% |
| Conductivity | 560 µS/cm | No legal limit | – |
| Colour | 1.1 mg/L Pt/Co | 20 mg/L Pt/Co | 6% |
| Aluminium | 0.012 mg/L | 0.2 mg/L | 6% |
| Turbidity | 0.2 NTU | 4 NTU | 5% |
| Iron | 0.013 mg/L | 0.2 mg/L | 7% |
| Copper | 0.011 mg/L | 2 mg/L | <1% |
| Arsenic | 0.00012 mg/L | 0.01 mg/L | 1% |
| Boron | 0.011 mg/L | 1 mg/L | 1% |
| Selenium | 0.00083 mg/L | 0.04 mg/L | 2% |
| Nitrate | 1.8 mg/L | 50 mg/L | 4% |
| Antimony | 0.00017 mg/L | 0.005 mg/L | 3% |
| Bromate | 0.0005 mg/L | 0.01 mg/L | 5% |
| Cadmium | 0.000018 mg/L | 0.005 mg/L | <1% |
| Lead | 0.000065 mg/L | 0.01 mg/L | <1% |
| Nitrite | 0.0061 mg/L | 0.5 mg/L | 1% |
| Chromium | 0.00067 mg/L | 0.05 mg/L | 1% |
| Nickel | 0.00085 mg/L | 0.02 mg/L | 4% |
| Fluoride | 0.24 mg/L | 1.5 mg/L | 16% |
413mg of limescale minerals in every litre
This is the water that furs up kettles
Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.
Softener quotes for SR6
Leave your details and we will email you when we can match you with installers who cover SR6. No obligation.
Request a free assessment and we'll come back to you with local installer options for your area.
100%
free, no obligation
shared only with your consent
Your coastal water is the Tyne and Wear, rated good
The Environment Agency rated the Tyne and Wear as good for ecological health in its 2025 assessment, meaning the coastal water is only slightly changed from its natural state. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.
None of this is a test of your tap water. Environment Agency record · River health across England
25
forever-chemical detections in nearby rivers and groundwater
At 2 sites. The highest was 6:2 FTSA at 0.029 µg/L, at Don at Jarrow Cemetery, 8.0 km away, in January 2026. These are river and borehole samples, not tests of your tap water.
Every PFAS sample around Sunderland · Which filters remove PFAS · PFAS explained
SR6 in short
Tap water in SR6 (Sunderland) is supplied by Northumbrian Water in the Sunderland Central zone and scores 9.7 out of 10, against an England and Wales average of 9.0. None of the 20 tested substances came close to a limit. The latest sample is from 17 December 2025.
- Among the hardest water in the country at 413 mg/LVery hard starts at 250 mg/L. At this level kettles scale up within weeks and a softener is a normal purchase in SR6. How hardness is measured
- 2nd cleanest of 10 areas tested in SunderlandOnly 1 area in Sunderland scored higher. The best is SR5 on 9.7. Every area in Sunderland
- 0.7 points above the national average of 9Cleaner than the typical tested district in the UK. Compare every area
Questions about SR6 water
Is SR6 tap water safe to drink?
Based on the latest tests, SR6 (Sunderland) water scores 9.7/10, which is safe. 0 of 20 tested contaminants exceeded recommended levels. Water is supplied by Northumbrian Water.
What contaminants are in SR6 water?
We tested 20 contaminants in SR6 water. None exceeded recommended safe levels. PFAS (forever chemicals) were also measured in rivers and groundwater within 10 km, though not in the tap-water tests themselves.
Who supplies water in SR6?
SR6 (Sunderland) is supplied by Northumbrian Water. You can view their full profile and compliance data on our supplier page.
Is SR6 water hard or soft?
Water in SR6 (Sunderland) has a hardness of 413 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.
Should I use a water filter in SR6?
SR6 water scored 9.7/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.
Are there PFAS forever chemicals in SR6 water?
The tap-water tests we hold for SR6 do not include a PFAS result. Environment Agency monitoring found PFAS in 25 river and groundwater samples from 2 sites within 10 km of SR6, the highest being 6:2 FTSA at 0.029 µg/L about 8 km away. These are environmental samples, not tests of tap water. The UK currently has no legal limit for PFAS in drinking water; the Drinking Water Inspectorate uses a 0.1 µg/L guideline for individual compounds. Reverse osmosis filters can reduce PFAS levels.
How clean is the coastal water near SR6?
The Environment Agency rated the Tyne and Wear as good for ecological health in its 2025 assessment, meaning the coastal water is only slightly changed from its natural state. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the coastal water, not of tap water in SR6, which is treated before it reaches homes.
Keep reading
- Best Filter for PFAS RemovalThe filters with independent certification to remove forever chemicals
- PFAS Forever ChemicalsWhat PFAS are and how to reduce your exposure at home
- Best Water Softener UKHarvey, Kinetico, BWT, Monarch and Water2Buy compared, with real costs
- Do I Need a Water Softener?The hardness bands, the symptoms, and a postcode check
- UK Water Hardness MapIs your water hard or soft, and does it matter?
- Do I need a water softener?The hardness bands, the symptoms, and when the answer is no
- Best water softener UKHarvey, Kinetico, BWT, Monarch and Water2Buy compared
- Water softener costUnit, fitting and salt, and how long the payback takes
- Installation explainedWhere it goes, the bypass tap, the drain, DIY or plumber
- Harvey vs KineticoThe two premium twin-cylinder brands, side by side
- Softener salt guideTablet, block or granular, and how much you get through
- Salt-free softenersConditioners and electronic descalers, honestly assessed
PFAS explainedHow to test your waterBest water filtersFilter shower headsWater testing kitsAll of SunderlandUK water rankingsWater hardness checkerWater hardness map
River and groundwater readings near SR6
Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.
Get alerts for your area
We'll email you when water quality data changes for SR6.