Skip to main content
tapwater
England and Wales average 9.2

Tap water in BN3, Brighton and HoveSafe to drink.Very hard.

Supplied by Southern Water. 17,833 samples, 22 substances, latest on 30 April 2026. Everything is inside the legal limit. One result, nitrate, sits close to the line.

9.3 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 280 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

Waterdrop G3P600 Reverse Osmosis

Waterdrop G3P600 Reverse Osmosis

£550typical price

Removes nitrate, the result that stood out in BN3.

Osmio PRO-III Ultimate Whole House

£499typical price

Removes nitrate, the result that stood out in BN3.

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if BN3’s water changes

We check for supply incidents every fifteen minutes. If one affects BN3, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for BN3

What's in a glass of BN3 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrate came closest to a limit, at 78% of it. 17 of 18 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitNitrite: 0.004 mg/L, <1% of the 0.5 mg/L limitNitrite<1%Bromate: 0.00013 mg/L, 1% of the 0.01 mg/L limitBromate1%Arsenic: 0.00015 mg/L, 1% of the 0.01 mg/L limitArsenic1%Copper: 0.0318 mg/L, 2% of the 2 mg/L limitCopper2%Chromium: 0.001 mg/L, 2% of the 0.05 mg/L limitChromium2%Selenium: 0.0008 mg/L, 2% of the 0.04 mg/L limitSelenium2%Cadmium: 0.00012 mg/L, 2% of the 0.005 mg/L limitCadmium2%Turbidity: 0.13 NTU, 3% of the 4 NTU limitTurbidity3%Manganese: 0.00178 mg/L, 4% of the 0.05 mg/L limitManganese4%Antimony: 0.0002 mg/L, 4% of the 0.005 mg/L limitAntimony4%Iron: 0.00928 mg/L, 5% of the 0.2 mg/L limitIron5%Aluminium: 0.0113 mg/L, 6% of the 0.2 mg/L limitAluminium6%Nickel: 0.0014 mg/L, 7% of the 0.02 mg/L limitNickel7%Ammonia: 0.039 mg/L, 8% of the 0.5 mg/L limitAmmonia8%Lead: 0.0008 mg/L, 8% of the 0.01 mg/L limitLead8%Trihalomethanes: 0.00878 mg/L, 9% of the 0.1 mg/L limitTrihalomethanes9%Colour: 3 mg/L Pt/Co, 15% of the 20 mg/L Pt/Co limitColour15%Nitrate: 38.9 mg/L, 78% of the 50 mg/L limitNitrate78%
  1. Nitrate78%
  2. Colour15%
  3. Trihalomethanes9%
  4. Lead8%
  5. Ammonia8%
  6. Nickel7%
  7. Aluminium6%
  8. Iron5%
  9. Antimony4%
  10. Manganese4%
  11. Turbidity3%
  12. Cadmium2%
  13. Chromium2%
  14. Selenium2%
  15. Copper2%
  16. Arsenic1%
  17. Bromate1%
  18. Nitrite<1%
  • pH 7.5 pH
  • Coliform Bacteria none found
  • E. coli none found
  • Conductivity 587 µS/cm
All 22 results as a table
SubstanceResultLegal limitShare of limit
Nitrate38.9 mg/L50 mg/L
78%
Colour3 mg/L Pt/Co20 mg/L Pt/Co
15%
Turbidity0.13 NTU4 NTU
3%
pH7.5 pHNo legal limit–
Aluminium0.0113 mg/L0.2 mg/L
6%
Iron0.00928 mg/L0.2 mg/L
5%
Manganese0.00178 mg/L0.05 mg/L
4%
Coliform Bacteria0 count/100mlMust be zeroNone found
E. coli0 count/100mlMust be zeroNone found
Lead0.0008 mg/L0.01 mg/L
8%
Conductivity587 µS/cmNo legal limit–
Trihalomethanes0.00878 mg/L0.1 mg/L
9%
Bromate0.00013 mg/L0.01 mg/L
1%
Nitrite0.004 mg/L0.5 mg/L
<1%
Copper0.0318 mg/L2 mg/L
2%
Arsenic0.00015 mg/L0.01 mg/L
1%
Cadmium0.00012 mg/L0.005 mg/L
2%
Chromium0.001 mg/L0.05 mg/L
2%
Nickel0.0014 mg/L0.02 mg/L
7%
Antimony0.0002 mg/L0.005 mg/L
4%
Selenium0.0008 mg/L0.04 mg/L
2%
Ammonia0.039 mg/L0.5 mg/L
8%

280mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Over 200 mg/L, the building regulations guidance for England counts this as a hard water area: a new combination boiler or water heater should have limescale protection. The 200 ppm rule

Softener quotes for BN3

Leave your details and we will email you when we can match you with installers who cover BN3. No obligation.

A fitted softener typically costs £1,195 to £2,900. Prices by brand, with sources. Request a free assessment and we'll come back to you with local installer options for your area.

BN3— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your coastal water is the Sussex, rated moderate

The Environment Agency rated the Sussex as moderate for ecological health in its 2025 assessment, meaning the coastal water is noticeably changed by pollution or engineering. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

Within 10 km

7

forever-chemical detections in nearby rivers and groundwater

At 1 site. The highest was PFBA at 0.0037 µg/L, at Brighton College, Ground Source Heat Pump, 4.2 km away, in October 2025. These are river and borehole samples, not tests of your tap water.

Every PFAS sample around Brighton · Which filters remove PFAS · PFAS explained

BN3 in short

Tap water in BN3 (Brighton and Hove) is supplied by Southern Water and scores 9.3 out of 10, against an England and Wales average of 9.2. 1 of 22 tested substances was close to or over a limit. The latest sample is from 30 April 2026.

  • Nitrate is within its legal limit but flagged, at 78% of the 50 mg/L maximumAnything over three quarters of a limit is flagged here as worth watching. It has not gone over. See every reading
  • Very hard water at 280 mg/LThe threshold for very hard is 250 mg/L. Expect visible limescale on taps and in kettles in BN3. How hardness is measured
  • 3rd cleanest of 4 areas tested in Brighton1 area in Brighton scored lower. The best is BN1 on 9.3. Every area in Brighton

Questions about BN3 water

Is BN3 tap water safe to drink?

Based on the latest tests, BN3 (Brighton and Hove) water scores 9.3/10, which is safe. 1 of 22 tested contaminants exceeded recommended levels. Water is supplied by Southern Water.

What contaminants are in BN3 water?

We tested 22 contaminants in BN3 water. 1 were flagged, including Nitrate. PFAS (forever chemicals) were also measured in rivers and groundwater within 10 km, though not in the tap-water tests themselves.

Who supplies water in BN3?

BN3 (Brighton and Hove) is supplied by Southern Water. You can view their full profile and compliance data on our supplier page.

Is BN3 water hard or soft?

Water in BN3 (Brighton and Hove) has a hardness of 280 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in BN3?

With 1 contaminant above recommended levels in BN3, a water filter could help. A reverse osmosis or activated carbon filter is recommended for PFAS removal. See our filter recommendations for your area.

Are there PFAS forever chemicals in BN3 water?

The tap-water tests we hold for BN3 do not include a PFAS result. Environment Agency monitoring found PFAS in 7 river and groundwater samples from 1 sites within 10 km of BN3, the highest being PFBA at 0.0037 µg/L about 4.2 km away. These are environmental samples, not tests of tap water. The UK currently has no legal limit for PFAS in drinking water; the Drinking Water Inspectorate uses a 0.1 µg/L guideline for individual compounds. Reverse osmosis filters can reduce PFAS levels.

How clean is the coastal water near BN3?

The Environment Agency rated the Sussex as moderate for ecological health in its 2025 assessment, meaning the coastal water is noticeably changed by pollution or engineering. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the coastal water, not of tap water in BN3, which is treated before it reaches homes.

Keep reading

PFAS explainedNitrate levelsBoiling water taps and hard waterHow to test your waterBest water filtersFilter shower headsWater testing kitsAll of BrightonUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near BN3

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
Ammonia0.056 mg/L0.5 mg/L
Nitrate15 mg/L50 mg/L
Nitrite0.15 mg/L0.5 mg/L
Phosphate0.015 mg/LNone
pH0.21 pHNone
Dissolved Oxygen5.95 mg/LNone
Manganese0.0104 mg/L0.05 mg/L
Iron0.0512 mg/L0.2 mg/L
Copper0.000808 mg/L2 mg/L
Zinc0.113 mg/LNone
Nickel0.00365 mg/L0.02 mg/L

Source: Southern Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from