Skip to main content
tapwater
England and Wales average 9.2

Tap water in BS10, Bristol, City ofToo few tap tests to call it.Very hard.

Supplied by Bristol Water. 9 substances, latest on 2 December 2025. These are river and groundwater samples near BS10, not tests of treated tap water, so treat the score as a rough guide.

9.1 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 255 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 10-Cup Jug

ZeroWater 10-Cup Jug

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if BS10’s water changes

We check for supply incidents every fifteen minutes. If one affects BS10, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for BS10

What's in a glass of BS10 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrate came closest to a limit, at 12% of it. 3 of 3 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitNitrite: 0.021 mg/L, 4% of the 0.5 mg/L limitNitrite4%Ammonia: 0.049 mg/L, 10% of the 0.5 mg/L limitAmmonia10%Nitrate: 5.9 mg/L, 12% of the 50 mg/L limitNitrate12%
  1. Nitrate12%
  2. Ammonia10%
  3. Nitrite4%
  • pH 7.92 pH
  • Temperature 10.7 °C
  • Conductivity 613 µS/cm
  • Phosphate 0.16 mg/L
  • Dissolved Oxygen 10.6 mg/L
  • PFAS (total) 0.0076 µg/L
All 9 results as a table
SubstanceResultLegal limitShare of limit
pH7.92 pHNo legal limit–
Temperature10.7 °CNo legal limit–
Conductivity613 µS/cmNo legal limit–
Ammonia0.049 mg/L0.5 mg/L
10%
Nitrate5.9 mg/L50 mg/L
12%
Nitrite0.021 mg/L0.5 mg/L
4%
Phosphate0.16 mg/LNo legal limit–
Dissolved Oxygen10.6 mg/LNo legal limit–
PFAS (total)0.0076 µg/LNo legal limit–

255mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Over 200 mg/L, the building regulations guidance for England counts this as a hard water area: a new combination boiler or water heater should have limescale protection. The 200 ppm rule

Softener quotes for BS10

Leave your details and we will email you when we can match you with installers who cover BS10. No obligation.

A fitted softener typically costs £1,195 to £2,900. Prices by brand, with sources. Request a free assessment and we'll come back to you with local installer options for your area.

BS10— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Trym - source to conf R Avon (Brist), rated moderate

The Environment Agency rated the Trym - source to conf R Avon (Brist) as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by fish, insects and other small river life and phosphate. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

Within 10 km

86

forever-chemical detections in nearby rivers and groundwater

At 3 sites. The highest was PFOS at 0.023 µg/L, at Eastville Lake Inlet, 5.2 km away, in July 2023. These are river and borehole samples, not tests of your tap water.

Every PFAS sample around Bristol · Which filters remove PFAS · PFAS explained

BS10 in short

Tap water in BS10 (Bristol, City of) is supplied by Bristol Water. Bristol Water publishes no tap-water test results for this area, so the score of 9.1 out of 10 comes from 9 substances measured in rivers and groundwater nearby, not from the tap. Treat it as background. The hardness figure, 255 mg/L, is Bristol Water's own for this district. The latest sample is from 2 December 2025.

  • The cleanest tap water of the 13 areas tested in BristolBS10 scores 9.1 out of 10, ahead of BS14 in second place on 8.9. Every area in Bristol
  • Very hard water at 255 mg/LThe threshold for very hard is 250 mg/L. Expect visible limescale on taps and in kettles in BS10. How hardness is measured
  • Scores higher than all 10 neighbouring districtsThe nearest rival is BS7 on 8.9, against 9.1 here. Compare with BS7

Questions about BS10 water

Is BS10 tap water safe to drink?

Based on the latest tests, BS10 (Bristol, City of) water scores 9.1/10, which is safe. 0 of 9 tested contaminants exceeded recommended levels. Water is supplied by Bristol Water.

What contaminants are in BS10 water?

We tested 9 contaminants in BS10 water. None exceeded recommended safe levels. PFAS (forever chemicals) were also detected at 0.0076 µg/L in nearby environmental monitoring.

Who supplies water in BS10?

BS10 (Bristol, City of) is supplied by Bristol Water. You can view their full profile and compliance data on our supplier page.

Is BS10 water hard or soft?

Water in BS10 (Bristol, City of) has a hardness of 255 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in BS10?

BS10 water scored 9.1/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in BS10 water?

Yes, PFAS (per- and polyfluoroalkyl substances) have been detected in BS10 at 0.0076 µg/L from environmental monitoring. The UK currently has no legal limit for PFAS in drinking water. Reverse osmosis and activated carbon filters can reduce PFAS levels.

How clean is the river near BS10?

The Environment Agency rated the Trym - source to conf R Avon (Brist) as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by fish, insects and other small river life and phosphate. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in BS10, which is treated before it reaches homes.