Skip to main content
tapwater
England and Wales average 9.0

Tap water in CO1, ColchesterSafe to drink.Very hard.

Supplied by Anglian Water. 755 samples, 19 substances, latest on 27 December 2024. Everything is inside the legal limit, and nothing comes close to it.

9.2 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 304 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 12-Cup Ready-Pour

ZeroWater 12-Cup Ready-Pour

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

What's in a glass of CO1 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Trihalomethanes came closest to a limit, at 32% of it. 14 of 16 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitCadmium: 0.00002 mg/L, <1% of the 0.005 mg/L limitCadmium<1%Copper: 0.03 mg/L, 2% of the 2 mg/L limitCopper2%Chromium: 0.00076 mg/L, 2% of the 0.05 mg/L limitChromium2%Arsenic: 0.00018 mg/L, 2% of the 0.01 mg/L limitArsenic2%Selenium: 0.00107 mg/L, 3% of the 0.04 mg/L limitSelenium3%Lead: 0.00049 mg/L, 5% of the 0.01 mg/L limitLead5%Turbidity: 0.21 NTU, 5% of the 4 NTU limitTurbidity5%Aluminium: 0.012 mg/L, 6% of the 0.2 mg/L limitAluminium6%Manganese: 0.003 mg/L, 6% of the 0.05 mg/L limitManganese6%Nitrite: 0.03 mg/L, 6% of the 0.5 mg/L limitNitrite6%Antimony: 0.00032 mg/L, 6% of the 0.005 mg/L limitAntimony6%Iron: 0.021 mg/L, 11% of the 0.2 mg/L limitIron11%Nitrate: 7.52 mg/L, 15% of the 50 mg/L limitNitrate15%Nickel: 0.00389 mg/L, 19% of the 0.02 mg/L limitNickel19%Fluoride: 0.46 mg/L, 31% of the 1.5 mg/L limitFluoride31%Trihalomethanes: 0.0323 mg/L, 32% of the 0.1 mg/L limitTrihalomethanes32%
  1. Trihalomethanes32%
  2. Fluoride31%
  3. Nickel19%
  4. Nitrate15%
  5. Iron11%
  6. Antimony6%
  7. Aluminium6%
  8. Manganese6%
  9. Nitrite6%
  10. Turbidity5%
  11. Lead5%
  12. Selenium3%
  13. Arsenic2%
  14. Chromium2%
  15. Copper2%
  16. Cadmium<1%
  • Coliform Bacteria none found
  • E. coli none found
  • Conductivity 463 µS/cm
All 19 results as a table
SubstanceResultLegal limitShare of limit
Turbidity0.21 NTU4 NTU
5%
Aluminium0.012 mg/L0.2 mg/L
6%
Iron0.021 mg/L0.2 mg/L
11%
Manganese0.003 mg/L0.05 mg/L
6%
Coliform Bacteria0 count/100mlMust be zeroNone found
E. coli0 count/100mlMust be zeroNone found
Trihalomethanes0.0323 mg/L0.1 mg/L
32%
Fluoride0.46 mg/L1.5 mg/L
31%
Arsenic0.00018 mg/L0.01 mg/L
2%
Cadmium0.00002 mg/L0.005 mg/L
<1%
Chromium0.00076 mg/L0.05 mg/L
2%
Nickel0.00389 mg/L0.02 mg/L
19%
Antimony0.00032 mg/L0.005 mg/L
6%
Selenium0.00107 mg/L0.04 mg/L
3%
Nitrate7.52 mg/L50 mg/L
15%
Nitrite0.03 mg/L0.5 mg/L
6%
Conductivity463 µS/cmNo legal limit–
Copper0.03 mg/L2 mg/L
2%
Lead0.00049 mg/L0.01 mg/L
5%

304mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Softener quotes for CO1

Leave your details and we will email you when we can match you with installers who cover CO1. No obligation.

Request a free assessment and we'll come back to you with local installer options for your area.

CO1— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Colne (d/s Doe's Corner), rated moderate

The Environment Agency rated the Colne (d/s Doe's Corner) as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by phosphate and water plants and algae. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

CO1 in short

Tap water in CO1 (Colchester) is supplied by Anglian Water in the Colchester Central zone and scores 9.2 out of 10, against an England and Wales average of 9.0. None of the 19 tested substances came close to a limit. The latest sample is from 27 December 2024.

  • Among the hardest water in the country at 304 mg/LVery hard starts at 250 mg/L. At this level kettles scale up within weeks and a softener is a normal purchase in CO1. How hardness is measured
  • 3rd cleanest of 6 areas tested in ColchesterSquarely mid-table for Colchester, between CO5 on 9.3 and CO3 on 9.
  • Nothing tested came within 40% of its legal limitThe highest was Trihalomethanes at 32% of the 0.1 mg/L maximum. See every reading

Questions about CO1 water

Is CO1 tap water safe to drink?

Based on the latest tests, CO1 (Colchester) water scores 9.2/10, which is safe. 0 of 19 tested contaminants exceeded recommended levels. Water is supplied by Anglian Water.

What contaminants are in CO1 water?

We tested 19 contaminants in CO1 water. None exceeded recommended safe levels.

Who supplies water in CO1?

CO1 (Colchester) is supplied by Anglian Water. You can view their full profile and compliance data on our supplier page.

Is CO1 water hard or soft?

Water in CO1 (Colchester) has a hardness of 304 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in CO1?

CO1 water scored 9.2/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in CO1 water?

No PFAS (forever chemicals) result is attached to the tap-water tests for CO1, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.

How clean is the river near CO1?

The Environment Agency rated the Colne (d/s Doe's Corner) as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by phosphate and water plants and algae. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in CO1, which is treated before it reaches homes.

Keep reading

How to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near CO1

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
Turbidity4.8 NTU4 NTU
pH7.93 pHNone
Temperature16 °CNone
Conductivity998 µS/cmNone
Nitrate6.4 mg/L50 mg/L
Nitrite0.011 mg/L0.5 mg/L
Phosphate0.16 mg/LNone
Dissolved Oxygen5.78 mg/LNone
Ammonia0.033 mg/L0.5 mg/L

Get alerts for your area

We'll email you when water quality data changes for CO1.

Source: Anglian Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from