Tap water in CT10, ThanetSafe to drink.
Supplied by Southern Water. 13,973 samples, 22 substances, latest on 30 April 2026. Everything is inside the legal limit, and nothing comes close to it.
9.3 / 10
The tank is as full as the score.
What to do about it

ZeroWater 12-Cup Ready-Pour
£40typical price
Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink
£70typical price
High-volume under-sink filtration without RO complexity

BRITA Marella XL + MAXTRA PRO
£25typical price
Basic chlorine and taste improvement on a budget
We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money
What's in a glass of CT10 water
Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.
Nitrate came closest to a limit, at 67% of it. 16 of 17 substances used under a quarter of theirs.
- Nitrate67%
- Colour15%
- Nickel13%
- Arsenic10%
- Ammonia8%
- Trihalomethanes6%
- Aluminium6%
- Iron5%
- Antimony4%
- Manganese4%
- Turbidity3%
- Cadmium2%
- Selenium2%
- Chromium2%
- Lead<1%
- Nitrite<1%
- Copper<1%
- pH 7.1 pH
- Coliform Bacteria none found
- E. coli none found
- Conductivity 682 µS/cm
- PFAS (total) 0.0256 µg/L
All 22 results as a table
| Substance | Result | Legal limit | Share of limit |
|---|---|---|---|
| Colour | 3 mg/L Pt/Co | 20 mg/L Pt/Co | 15% |
| Turbidity | 0.13 NTU | 4 NTU | 3% |
| pH | 7.1 pH | No legal limit | – |
| Nitrate | 33.4 mg/L | 50 mg/L | 67% |
| Nitrite | 0.004 mg/L | 0.5 mg/L | <1% |
| Ammonia | 0.039 mg/L | 0.5 mg/L | 8% |
| Aluminium | 0.0113 mg/L | 0.2 mg/L | 6% |
| Iron | 0.00928 mg/L | 0.2 mg/L | 5% |
| Manganese | 0.00178 mg/L | 0.05 mg/L | 4% |
| Copper | 0.0094 mg/L | 2 mg/L | <1% |
| Arsenic | 0.001 mg/L | 0.01 mg/L | 10% |
| Cadmium | 0.00012 mg/L | 0.005 mg/L | 2% |
| Chromium | 0.001 mg/L | 0.05 mg/L | 2% |
| Nickel | 0.0025 mg/L | 0.02 mg/L | 13% |
| Lead | 0.00009 mg/L | 0.01 mg/L | <1% |
| Antimony | 0.0002 mg/L | 0.005 mg/L | 4% |
| Selenium | 0.0009 mg/L | 0.04 mg/L | 2% |
| Coliform Bacteria | 0 count/100ml | Must be zero | None found |
| E. coli | 0 count/100ml | Must be zero | None found |
| Trihalomethanes | 0.00643 mg/L | 0.1 mg/L | 6% |
| Conductivity | 682 µS/cm | No legal limit | – |
| PFAS (total) | 0.0256 µg/L | No legal limit | – |
Your coastal water is the Kent North, rated moderate
The Environment Agency rated the Kent North as moderate for ecological health in its 2025 assessment, meaning the coastal water is noticeably changed by pollution or engineering. It is held back by nitrogen. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.
None of this is a test of your tap water. Environment Agency record · River health across England
CT10 in short
Tap water in CT10 (Thanet) is supplied by Southern Water in the Thanet Central zone and scores 9.3 out of 10, against an England and Wales average of 9.0. None of the 22 tested substances came close to a limit. The latest sample is from 30 April 2026.
- Nitrate is the reading closest to its limit, at 67% of the 50 mg/L maximumIt passed with room to spare, and everything else tested sat further below its limit. See every reading
- 4th cleanest of 6 areas tested in ThanetSquarely mid-table for Thanet, between CT11 on 9.4 and CT9 on 9.3.
- Scores higher than 0 of 5 neighbouring districtsWater here is typical for the immediate area, which usually means the same treatment works and the same supply zone.
Questions about CT10 water
Is CT10 tap water safe to drink?
Based on the latest tests, CT10 (Thanet) water scores 9.3/10, which is safe. 0 of 22 tested contaminants exceeded recommended levels. Water is supplied by Southern Water.
What contaminants are in CT10 water?
We tested 22 contaminants in CT10 water. None exceeded recommended safe levels. PFAS (forever chemicals) were also detected at 0.02563 µg/L in local drinking water tests.
Who supplies water in CT10?
CT10 (Thanet) is supplied by Southern Water. You can view their full profile and compliance data on our supplier page.
Should I use a water filter in CT10?
CT10 water scored 9.3/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.
Are there PFAS forever chemicals in CT10 water?
Yes, PFAS (per- and polyfluoroalkyl substances) have been detected in CT10 at 0.02563 µg/L from drinking monitoring. The UK currently has no legal limit for PFAS in drinking water. Reverse osmosis and activated carbon filters can reduce PFAS levels.
How clean is the coastal water near CT10?
The Environment Agency rated the Kent North as moderate for ecological health in its 2025 assessment, meaning the coastal water is noticeably changed by pollution or engineering. It is held back by nitrogen. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the coastal water, not of tap water in CT10, which is treated before it reaches homes.
Keep reading
- Best Filter for PFAS RemovalThe filters with independent certification to remove forever chemicals
- PFAS Forever ChemicalsWhat PFAS are and how to reduce your exposure at home
- Is UK Tap Water Safe?Everything you need to know about tap water safety in the UK
- Best Water Filters UKEvery filter type compared on what it actually removes
PFAS explainedHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map
River and groundwater readings near CT10
Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.
| Substance | Reading | Drinking water limit |
|---|---|---|
| pH | 6.9 pH | None |
| Temperature | 13.8 °C | None |
| Conductivity | 1013 µS/cm | None |
| Dissolved Oxygen | 7.94 mg/L | None |
| Nitrate | 11 mg/L | 50 mg/L |
| Phosphate | 0.012 mg/L | None |
| Boron | 0.16 mg/L | 1 mg/L |
| Copper | 0.0016 mg/L | 2 mg/L |
| Lead | 0.00005 mg/L | 0.01 mg/L |
| Zinc | 0.04 mg/L | None |
| Nickel | 0.0025 mg/L | 0.02 mg/L |
| Manganese | 0.00072 mg/L | 0.05 mg/L |
Get alerts for your area
We'll email you when water quality data changes for CT10.