Tap water in DN10, BassetlawSafe to drink.Very hard.
Supplied by Severn Trent. 204 samples, 20 substances, latest on 15 December 2025. Everything is inside the legal limit, and nothing comes close to it.
8.8 / 10
The tank is as full as the score. The specks are the minerals that make water hard.
What to do about it
Hard water: compare softener quotes
At 293 mg/L a softener is the only thing that stops limescale. Filters do not soften water.
It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.
ZeroWater 12-Cup Ready-Pour
£40typical price
Households concerned about PFAS and heavy metals
Waterdrop 10UA Under Sink
£70typical price
High-volume under-sink filtration without RO complexity
We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money
What's in a glass of DN10 water
Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.
Fluoride came closest to a limit, at 67% of it. 15 of 17 substances used under a quarter of theirs.
- Fluoride67%
- Nitrate53%
- Arsenic21%
- Trihalomethanes13%
- Aluminium11%
- Iron6%
- Nickel5%
- Colour4%
- Copper4%
- Turbidity3%
- Antimony1%
- Manganese1%
- Lead1%
- Chromium<1%
- Nitrite<1%
- Cadmium<1%
- Selenium<1%
- Conductivity 527 µS/cm
- pH 7.59 pH
- Phosphate 0.862 mg/L
All 20 results as a table
| Substance | Result | Legal limit | Share of limit |
|---|---|---|---|
| Conductivity | 527 µS/cm | No legal limit | – |
| Nickel | 0.001 mg/L | 0.02 mg/L | 5% |
| pH | 7.59 pH | No legal limit | – |
| Lead | 0.00014 mg/L | 0.01 mg/L | 1% |
| Antimony | 0.000074 mg/L | 0.005 mg/L | 1% |
| Nitrate | 26.5 mg/L | 50 mg/L | 53% |
| Selenium | 0.00013 mg/L | 0.04 mg/L | <1% |
| Trihalomethanes | 0.0126 mg/L | 0.1 mg/L | 13% |
| Nitrite | 0.003 mg/L | 0.5 mg/L | <1% |
| Aluminium | 0.021 mg/L | 0.2 mg/L | 11% |
| Iron | 0.012 mg/L | 0.2 mg/L | 6% |
| Manganese | 0.00073 mg/L | 0.05 mg/L | 1% |
| Copper | 0.0753 mg/L | 2 mg/L | 4% |
| Fluoride | 1.01 mg/L | 1.5 mg/L | 67% |
| Arsenic | 0.00211 mg/L | 0.01 mg/L | 21% |
| Cadmium | 0.00002 mg/L | 0.005 mg/L | <1% |
| Chromium | 0.00042 mg/L | 0.05 mg/L | <1% |
| Colour | 0.8 mg/L Pt/Co | 20 mg/L Pt/Co | 4% |
| Turbidity | 0.12 NTU | 4 NTU | 3% |
| Phosphate | 0.862 mg/L | No legal limit | – |
293mg of limescale minerals in every litre, typical for the DN area. DN10 has no reading of its own.
This is the water that furs up kettles
Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.
Softener quotes for DN10
Leave your details and we will email you when we can match you with installers who cover DN10. No obligation.
Request a free assessment and we'll come back to you with local installer options for your area.
100%
free, no obligation
shared only with your consent
Your river is the Idle from Ryton to Trent, rated poor
The Environment Agency rated the Idle from Ryton to Trent as poor for ecological health in its 2025 assessment, meaning the river is badly affected, with much of the expected wildlife missing. It is held back by fish, water plants and algae and phosphate. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. Its ecological rating has dropped since the previous assessment.
None of this is a test of your tap water. Environment Agency record · River health across England
DN10 in short
Tap water in DN10 (Bassetlaw) is supplied by Severn Trent in the Bassetlaw Central zone and scores 8.8 out of 10, against an England and Wales average of 9.0. None of the 20 tested substances came close to a limit. The latest sample is from 15 December 2025.
- The cleanest tap water of the 4 areas tested in BassetlawDN10 scores 8.8 out of 10, ahead of S80 in second place on 8.8.
- Fluoride is the reading closest to its limit, at 67% of the 1.5 mg/L maximumIt passed with room to spare, and everything else tested sat further below its limit. See every reading
- Very hard water at 293 mg/LThe threshold for very hard is 250 mg/L. Expect visible limescale on taps and in kettles across the DN postcode area. How hardness is measured
Questions about DN10 water
Is DN10 tap water safe to drink?
Based on the latest tests, DN10 (Bassetlaw) water scores 8.8/10, which is safe. 0 of 20 tested contaminants exceeded recommended levels. Water is supplied by Severn Trent.
What contaminants are in DN10 water?
We tested 20 contaminants in DN10 water. None exceeded recommended safe levels.
Who supplies water in DN10?
DN10 (Bassetlaw) is supplied by Severn Trent. You can view their full profile and compliance data on our supplier page.
Is DN10 water hard or soft?
No hardness reading has been published for DN10 itself. Across the DN postcode area the typical value is 293 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.
Should I use a water filter in DN10?
DN10 water scored 8.8/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.
Are there PFAS forever chemicals in DN10 water?
No PFAS (forever chemicals) result is attached to the tap-water tests for DN10, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.
How clean is the river near DN10?
The Environment Agency rated the Idle from Ryton to Trent as poor for ecological health in its 2025 assessment, meaning the river is badly affected, with much of the expected wildlife missing. It is held back by fish, water plants and algae and phosphate. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. Its ecological rating has dropped since the previous assessment. This is a rating of the river, not of tap water in DN10, which is treated before it reaches homes.
Keep reading
- Best Water Softener UKHarvey, Kinetico, BWT, Monarch and Water2Buy compared, with real costs
- Do I Need a Water Softener?The hardness bands, the symptoms, and a postcode check
- UK Water Hardness MapIs your water hard or soft, and does it matter?
- Is UK Tap Water Safe?Everything you need to know about tap water safety in the UK
- Do I need a water softener?The hardness bands, the symptoms, and when the answer is no
- Best water softener UKHarvey, Kinetico, BWT, Monarch and Water2Buy compared
- Water softener costUnit, fitting and salt, and how long the payback takes
- Installation explainedWhere it goes, the bypass tap, the drain, DIY or plumber
- Harvey vs KineticoThe two premium twin-cylinder brands, side by side
- Softener salt guideTablet, block or granular, and how much you get through
- Salt-free softenersConditioners and electronic descalers, honestly assessed
How to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map
River and groundwater readings near DN10
Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.
Get alerts for your area
We'll email you when water quality data changes for DN10.