Skip to main content
tapwater
England and Wales average 9.2

Tap water in ME10, SwaleSafe to drink.Very hard.

Supplied by Southern Water. 23,613 samples, 22 substances, latest on 29 April 2026. Everything is inside the legal limit, and nothing comes close to it.

9.5 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 306 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 10-Cup Jug

ZeroWater 10-Cup Jug

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if ME10’s water changes

We check for supply incidents every fifteen minutes. If one affects ME10, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for ME10

What's in a glass of ME10 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrate came closest to a limit, at 52% of it. 17 of 18 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitCopper: 0.0052 mg/L, <1% of the 2 mg/L limitCopper<1%Antimony: 0.000029 mg/L, <1% of the 0.005 mg/L limitAntimony<1%Cadmium: 0.000031 mg/L, <1% of the 0.005 mg/L limitCadmium<1%Chromium: 0.00035 mg/L, <1% of the 0.05 mg/L limitChromium<1%Nickel: 0.00025 mg/L, 1% of the 0.02 mg/L limitNickel1%Bromate: 0.00013 mg/L, 1% of the 0.01 mg/L limitBromate1%Lead: 0.00014 mg/L, 1% of the 0.01 mg/L limitLead1%Arsenic: 0.00015 mg/L, 1% of the 0.01 mg/L limitArsenic1%Selenium: 0.0007 mg/L, 2% of the 0.04 mg/L limitSelenium2%Nitrite: 0.009 mg/L, 2% of the 0.5 mg/L limitNitrite2%Trihalomethanes: 0.00319 mg/L, 3% of the 0.1 mg/L limitTrihalomethanes3%Turbidity: 0.13 NTU, 3% of the 4 NTU limitTurbidity3%Manganese: 0.00178 mg/L, 4% of the 0.05 mg/L limitManganese4%Iron: 0.00928 mg/L, 5% of the 0.2 mg/L limitIron5%Aluminium: 0.0113 mg/L, 6% of the 0.2 mg/L limitAluminium6%Ammonia: 0.039 mg/L, 8% of the 0.5 mg/L limitAmmonia8%Colour: 3 mg/L Pt/Co, 15% of the 20 mg/L Pt/Co limitColour15%Nitrate: 26.1 mg/L, 52% of the 50 mg/L limitNitrate52%
  1. Nitrate52%
  2. Colour15%
  3. Ammonia8%
  4. Aluminium6%
  5. Iron5%
  6. Manganese4%
  7. Turbidity3%
  8. Trihalomethanes3%
  9. Nitrite2%
  10. Selenium2%
  11. Arsenic1%
  12. Lead1%
  13. Bromate1%
  14. Nickel1%
  15. Chromium<1%
  16. Cadmium<1%
  17. Antimony<1%
  18. Copper<1%
  • Coliform Bacteria none found
  • E. coli none found
  • Conductivity 560 µS/cm
  • pH 7.9 pH
All 22 results as a table
SubstanceResultLegal limitShare of limit
Nitrate26.1 mg/L50 mg/L
52%
Aluminium0.0113 mg/L0.2 mg/L
6%
Iron0.00928 mg/L0.2 mg/L
5%
Manganese0.00178 mg/L0.05 mg/L
4%
Lead0.00014 mg/L0.01 mg/L
1%
Coliform Bacteria0 count/100mlMust be zeroNone found
E. coli0 count/100mlMust be zeroNone found
Conductivity560 µS/cmNo legal limit–
Trihalomethanes0.00319 mg/L0.1 mg/L
3%
pH7.9 pHNo legal limit–
Colour3 mg/L Pt/Co20 mg/L Pt/Co
15%
Turbidity0.13 NTU4 NTU
3%
Bromate0.00013 mg/L0.01 mg/L
1%
Nitrite0.009 mg/L0.5 mg/L
2%
Ammonia0.039 mg/L0.5 mg/L
8%
Copper0.0052 mg/L2 mg/L
<1%
Arsenic0.00015 mg/L0.01 mg/L
1%
Cadmium0.000031 mg/L0.005 mg/L
<1%
Chromium0.00035 mg/L0.05 mg/L
<1%
Nickel0.00025 mg/L0.02 mg/L
1%
Antimony0.000029 mg/L0.005 mg/L
<1%
Selenium0.0007 mg/L0.04 mg/L
2%

306mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Over 200 mg/L, the building regulations guidance for England counts this as a hard water area: a new combination boiler or water heater should have limescale protection. The 200 ppm rule

Softener quotes for ME10

Leave your details and we will email you when we can match you with installers who cover ME10. No obligation.

A fitted softener typically costs £1,195 to £2,900. Prices by brand, with sources. Request a free assessment and we'll come back to you with local installer options for your area.

ME10— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your estuary is the Swale, rated moderate

The Environment Agency rated the Swale as moderate for ecological health in its 2025 assessment, meaning the estuary is noticeably changed by pollution or engineering. It is held back by nitrogen and seagrass and saltmarsh. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

ME10 in short

Tap water in ME10 (Swale) is supplied by Southern Water and scores 9.5 out of 10, against an England and Wales average of 9.2. None of the 22 tested substances came close to a limit. The latest sample is from 29 April 2026.

  • The cleanest tap water of the 5 areas tested in SwaleME10 scores 9.5 out of 10, ahead of ME12 in second place on 9.5.
  • Among the hardest water in the country at 306 mg/LVery hard starts at 250 mg/L. At this level kettles scale up within weeks and a softener is a normal purchase in ME10. How hardness is measured
  • Nitrate is the reading closest to its limit, at 52% of the 50 mg/L maximumIt passed with room to spare, and everything else tested sat further below its limit. See every reading

Questions about ME10 water

Is ME10 tap water safe to drink?

Based on the latest tests, ME10 (Swale) water scores 9.5/10, which is safe. 0 of 22 tested contaminants exceeded recommended levels. Water is supplied by Southern Water.

What contaminants are in ME10 water?

We tested 22 contaminants in ME10 water. None exceeded recommended safe levels.

Who supplies water in ME10?

ME10 (Swale) is supplied by Southern Water. You can view their full profile and compliance data on our supplier page.

Is ME10 water hard or soft?

Water in ME10 (Swale) has a hardness of 306 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in ME10?

ME10 water scored 9.5/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in ME10 water?

No PFAS (forever chemicals) result is attached to the tap-water tests for ME10, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.

How clean is the estuary near ME10?

The Environment Agency rated the Swale as moderate for ecological health in its 2025 assessment, meaning the estuary is noticeably changed by pollution or engineering. It is held back by nitrogen and seagrass and saltmarsh. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the estuary, not of tap water in ME10, which is treated before it reaches homes.

Keep reading

Boiling water taps and hard waterHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near ME10

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
Ammonia2.8 mg/L0.5 mg/L
Aluminium0.18 mg/L0.2 mg/L
Turbidity12 NTU4 NTU
Lead0.0067 mg/L0.01 mg/L
pH7.51 pHNone
Temperature10.8 °CNone
Conductivity19237 µS/cmNone
Cadmium0.0001 mg/L0.005 mg/L
Nitrate0.21 mg/L50 mg/L
Hardness (as CaCO3)2250 mg/LNone
Phosphate0.21 mg/LNone
Chromium0.0013 mg/L0.05 mg/L
Zinc0.011 mg/LNone
Nickel0.0028 mg/L0.02 mg/L
Copper0.0025 mg/L2 mg/L

Source: Southern Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from