Tap water in ME19, Tonbridge and MallingToo few tap tests to call it.Very hard.
Supplied by South East Water. 8 substances, latest on 28 October 2026. These are river and groundwater samples near ME19, not tests of treated tap water, so treat the score as a rough guide.
8.7 / 10
The tank is as full as the score. The specks are the minerals that make water hard.
What to do about it
Hard water: compare softener quotes
At 253 mg/L a softener is the only thing that stops limescale. Filters do not soften water.
It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 10-Cup Jug
£40typical price
Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink
£70typical price
High-volume under-sink filtration without RO complexity
We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money
Hear about it if ME19’s water changes
We check for supply incidents every fifteen minutes. If one affects ME19, you get an email the same day. You also get five short emails about your water over the first month.
Want this as a document?
Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.
See the full report for ME19What's in a glass of ME19 water
Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.
Ammonia came closest to a limit, at 20% of it. 3 of 3 substances used under a quarter of theirs.
- Ammonia20%
- Nitrate11%
- Nitrite8%
- pH 7.6 pH
- Temperature 11.4 °C
- Conductivity 486 µS/cm
- Phosphate 0.22 mg/L
- Dissolved Oxygen 9.72 mg/L
All 8 results as a table
253mg of limescale minerals in every litre
This is the water that furs up kettles
Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.
Over 200 mg/L, the building regulations guidance for England counts this as a hard water area: a new combination boiler or water heater should have limescale protection. The 200 ppm rule
Softener quotes for ME19
Leave your details and we will email you when we can match you with installers who cover ME19. No obligation.
A fitted softener typically costs £1,195 to £2,900. Prices by brand, with sources. Request a free assessment and we'll come back to you with local installer options for your area.
100%
free, no obligation
shared only with your consent
Your river is the Leybourne Stream, rated poor
The Environment Agency rated the Leybourne Stream as poor for ecological health in its 2025 assessment, meaning the river is badly affected, with much of the expected wildlife missing. It is held back by fish and water plants and algae. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.
None of this is a test of your tap water. Environment Agency record · River health across England
ME19 in short
Tap water in ME19 (Tonbridge and Malling) is supplied by South East Water. South East Water publishes no tap-water test results for this area, so the score of 8.7 out of 10 comes from 8 substances measured in rivers and groundwater nearby, not from the tap. Treat it as background. The hardness figure, 253 mg/L, is South East Water's own for this district. The latest sample is from 28 October 2026.
- Very hard water at 253 mg/LThe threshold for very hard is 250 mg/L. Expect visible limescale on taps and in kettles in ME19. How hardness is measured
- 3rd cleanest of 7 areas tested in Tonbridge and MallingOnly 2 areas in Tonbridge and Malling scored higher. The best is ME20 on 9.4.
- 0.5 points below the national average of 9.2Below the typical tested district in the UK, which is worth knowing before you choose a filter. Compare every area
Questions about ME19 water
Is ME19 tap water safe to drink?
Based on the latest tests, ME19 (Tonbridge and Malling) water scores 8.7/10, which is safe. 0 of 8 tested contaminants exceeded recommended levels. Water is supplied by South East Water.
What contaminants are in ME19 water?
We tested 8 contaminants in ME19 water. None exceeded recommended safe levels.
Who supplies water in ME19?
ME19 (Tonbridge and Malling) is supplied by South East Water. You can view their full profile and compliance data on our supplier page.
Is ME19 water hard or soft?
Water in ME19 (Tonbridge and Malling) has a hardness of 253 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.
Should I use a water filter in ME19?
ME19 water scored 8.7/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.
Are there PFAS forever chemicals in ME19 water?
No PFAS (forever chemicals) result is attached to the tap-water tests for ME19, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.
How clean is the river near ME19?
The Environment Agency rated the Leybourne Stream as poor for ecological health in its 2025 assessment, meaning the river is badly affected, with much of the expected wildlife missing. It is held back by fish and water plants and algae. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in ME19, which is treated before it reaches homes.
Keep reading
- Best Water Softener UKHarvey, Kinetico, BWT, Monarch and Water2Buy compared, with real costs
- Do I Need a Water Softener?The hardness bands, the symptoms, and a postcode check
- UK Water Hardness MapIs your water hard or soft, and does it matter?
- Is UK Tap Water Safe?Everything you need to know about tap water safety in the UK
- Do I need a water softener?The hardness bands, the symptoms, and when the answer is no
- Best water softener UKHarvey, Kinetico, BWT, Monarch and Water2Buy compared
- Water softener costUnit, fitting and salt, and how long the payback takes
- Installation explainedWhere it goes, the bypass tap, the drain, DIY or plumber
- Harvey vs KineticoThe two premium twin-cylinder brands, side by side
- Softener salt guideTablet, block or granular, and how much you get through
- Salt-free softenersConditioners and electronic descalers, honestly assessed
- Hard water and new boilersThe 200 ppm rule in the building regulations, with a postcode check
Boiling water taps and hard waterHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map