Tap water in ME20, Tonbridge and MallingToo few tap tests to call it.Very hard.
Supplied by South East Water. 10 substances, latest on 16 September 2026. These are river and groundwater samples near ME20, not tests of treated tap water, so treat the score as a rough guide.
9.4 / 10
The tank is as full as the score. The specks are the minerals that make water hard.
What to do about it
Hard water: compare softener quotes
At 328 mg/L a softener is the only thing that stops limescale. Filters do not soften water.
It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 10-Cup Jug
£40typical price
Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink
£70typical price
High-volume under-sink filtration without RO complexity
We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money
Hear about it if ME20’s water changes
We check for supply incidents every fifteen minutes. If one affects ME20, you get an email the same day. You also get five short emails about your water over the first month.
Want this as a document?
Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.
See the full report for ME20What's in a glass of ME20 water
Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.
Nitrate came closest to a limit, at 16% of it. 4 of 4 substances used under a quarter of theirs.
- Nitrate16%
- Ammonia7%
- Nitrite1%
- Copper<1%
- pH 0.3 pH
- Dissolved Oxygen 7.54 mg/L
- Temperature 10.2 °C
- Conductivity 734 µS/cm
- Phosphate 0.018 mg/L
- Zinc 0.00732 mg/L
All 10 results as a table
| Substance | Result | Legal limit | Share of limit |
|---|---|---|---|
| pH | 0.3 pH | No legal limit | – |
| Dissolved Oxygen | 7.54 mg/L | No legal limit | – |
| Temperature | 10.2 °C | No legal limit | – |
| Conductivity | 734 µS/cm | No legal limit | – |
| Nitrate | 7.8 mg/L | 50 mg/L | 16% |
| Nitrite | 0.0064 mg/L | 0.5 mg/L | 1% |
| Phosphate | 0.018 mg/L | No legal limit | – |
| Ammonia | 0.033 mg/L | 0.5 mg/L | 7% |
| Copper | 0.00166 mg/L | 2 mg/L | <1% |
| Zinc | 0.00732 mg/L | No legal limit | – |
328mg of limescale minerals in every litre
This is the water that furs up kettles
Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.
Over 200 mg/L, the building regulations guidance for England counts this as a hard water area: a new combination boiler or water heater should have limescale protection. The 200 ppm rule
Softener quotes for ME20
Leave your details and we will email you when we can match you with installers who cover ME20. No obligation.
A fitted softener typically costs £1,195 to £2,900. Prices by brand, with sources. Request a free assessment and we'll come back to you with local installer options for your area.
100%
free, no obligation
shared only with your consent
Your river is the Ditton Stream, rated moderate
The Environment Agency rated the Ditton Stream as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.
None of this is a test of your tap water. Environment Agency record · River health across England
ME20 in short
Tap water in ME20 (Tonbridge and Malling) is supplied by South East Water. South East Water publishes no tap-water test results for this area, so the score of 9.4 out of 10 comes from 10 substances measured in rivers and groundwater nearby, not from the tap. Treat it as background. The hardness figure, 328 mg/L, is South East Water's own for this district. The latest sample is from 16 September 2026.
- The cleanest tap water of the 7 areas tested in Tonbridge and MallingME20 scores 9.4 out of 10, ahead of TN15 in second place on 9.4.
- Among the hardest water in the country at 328 mg/LVery hard starts at 250 mg/L. At this level kettles scale up within weeks and a softener is a normal purchase in ME20. How hardness is measured
- Nothing tested came within 40% of its legal limitThe highest was Nitrate at 16% of the 50 mg/L maximum. See every reading
Questions about ME20 water
Is ME20 tap water safe to drink?
Based on the latest tests, ME20 (Tonbridge and Malling) water scores 9.4/10, which is safe. 0 of 10 tested contaminants exceeded recommended levels. Water is supplied by South East Water.
What contaminants are in ME20 water?
We tested 10 contaminants in ME20 water. None exceeded recommended safe levels.
Who supplies water in ME20?
ME20 (Tonbridge and Malling) is supplied by South East Water. You can view their full profile and compliance data on our supplier page.
Is ME20 water hard or soft?
Water in ME20 (Tonbridge and Malling) has a hardness of 328 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.
Should I use a water filter in ME20?
ME20 water scored 9.4/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.
Are there PFAS forever chemicals in ME20 water?
No PFAS (forever chemicals) result is attached to the tap-water tests for ME20, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.
How clean is the river near ME20?
The Environment Agency rated the Ditton Stream as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in ME20, which is treated before it reaches homes.
Keep reading
- Best Water Softener UKHarvey, Kinetico, BWT, Monarch and Water2Buy compared, with real costs
- Do I Need a Water Softener?The hardness bands, the symptoms, and a postcode check
- UK Water Hardness MapIs your water hard or soft, and does it matter?
- Is UK Tap Water Safe?Everything you need to know about tap water safety in the UK
- Do I need a water softener?The hardness bands, the symptoms, and when the answer is no
- Best water softener UKHarvey, Kinetico, BWT, Monarch and Water2Buy compared
- Water softener costUnit, fitting and salt, and how long the payback takes
- Installation explainedWhere it goes, the bypass tap, the drain, DIY or plumber
- Harvey vs KineticoThe two premium twin-cylinder brands, side by side
- Softener salt guideTablet, block or granular, and how much you get through
- Salt-free softenersConditioners and electronic descalers, honestly assessed
- Hard water and new boilersThe 200 ppm rule in the building regulations, with a postcode check
Boiling water taps and hard waterHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map