Tap water in ME6, Tonbridge and MallingIron is over the limit.Hard.
Supplied by South East Water. 14 substances, latest on 10 March 2025. Iron came in above the legal limit. Everything else passed.
8.0 / 10
The tank is as full as the score. The specks are the minerals that make water hard.
What to do about it
Hard water: compare softener quotes
At 233 mg/L a softener is the only thing that stops limescale. Filters do not soften water.
It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

Waterdrop G3P600 Reverse Osmosis
£550typical price
Maximum contaminant removal including PFAS and fluoride

Waterdrop 10UA Under Sink
£70typical price
High-volume under-sink filtration without RO complexity
We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money
Hear about it if ME6’s water changes
We check for supply incidents every fifteen minutes. If one affects ME6, you get an email the same day. You also get five short emails about your water over the first month.
Want this as a document?
Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.
See the full report for ME6What's in a glass of ME6 water
Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.
Iron is over its legal limit, at 204% of it.
- Iron204%
- Aluminium61%
- Manganese32%
- Nitrate16%
- Nickel9%
- Ammonia7%
- Nitrite1%
- Copper<1%
- pH 7.97 pH
- Temperature 10.2 °C
- Conductivity 734 µS/cm
- Phosphate 0.018 mg/L
- Dissolved Oxygen 11.1 mg/L
- Zinc 0.00732 mg/L
All 14 results as a table
| Substance | Result | Legal limit | Share of limit |
|---|---|---|---|
| Iron | 0.408 mg/L | 0.2 mg/L | 204% |
| pH | 7.97 pH | No legal limit | – |
| Temperature | 10.2 °C | No legal limit | – |
| Conductivity | 734 µS/cm | No legal limit | – |
| Nitrate | 7.8 mg/L | 50 mg/L | 16% |
| Nitrite | 0.0064 mg/L | 0.5 mg/L | 1% |
| Phosphate | 0.018 mg/L | No legal limit | – |
| Dissolved Oxygen | 11.1 mg/L | No legal limit | – |
| Ammonia | 0.033 mg/L | 0.5 mg/L | 7% |
| Copper | 0.00166 mg/L | 2 mg/L | <1% |
| Zinc | 0.00732 mg/L | No legal limit | – |
| Nickel | 0.0018 mg/L | 0.02 mg/L | 9% |
| Manganese | 0.016 mg/L | 0.05 mg/L | 32% |
| Aluminium | 0.121 mg/L | 0.2 mg/L | 61% |
233mg of limescale minerals in every litre
This is the water that furs up kettles
Hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.
Over 200 mg/L, the building regulations guidance for England counts this as a hard water area: a new combination boiler or water heater should have limescale protection. The 200 ppm rule
Softener quotes for ME6
Leave your details and we will email you when we can match you with installers who cover ME6. No obligation.
A fitted softener typically costs £1,195 to £2,900. Prices by brand, with sources. Request a free assessment and we'll come back to you with local installer options for your area.
100%
free, no obligation
shared only with your consent
Your river is the Leybourne Stream, rated poor
The Environment Agency rated the Leybourne Stream as poor for ecological health in its 2025 assessment, meaning the river is badly affected, with much of the expected wildlife missing. It is held back by fish and water plants and algae. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.
None of this is a test of your tap water. Environment Agency record · River health across England
ME6 in short
Tap water in ME6 (Tonbridge and Malling) is supplied by South East Water. South East Water publishes no tap-water test results for this area, so the score of 8.0 out of 10 comes from 14 substances measured in rivers and groundwater nearby, not from the tap. Treat it as background. The hardness figure, 233 mg/L, is South East Water's own for this district. The latest sample is from 10 March 2025.
- Iron was measured at 0.41 mg/L, 2 times the UK limitIt is the only one of 14 tested substances to go over its limit. See the full results
- Hard water at 233 mg/LHard starts at 180 mg/L, the point where a softener begins to pay for itself. Limescale will build up in ME6. How hardness is measured
- 4th cleanest of 7 areas tested in Tonbridge and MallingSquarely mid-table for Tonbridge and Malling, between ME20 on 9.4 and TN9 on 6.9.
Questions about ME6 water
Is ME6 tap water safe to drink?
Based on the latest tests, ME6 (Tonbridge and Malling) water scores 8/10, which is safe. 1 of 14 tested contaminants exceeded recommended levels. Water is supplied by South East Water.
What contaminants are in ME6 water?
We tested 14 contaminants in ME6 water. 1 were flagged, including Iron.
Who supplies water in ME6?
ME6 (Tonbridge and Malling) is supplied by South East Water. You can view their full profile and compliance data on our supplier page.
Is ME6 water hard or soft?
Water in ME6 (Tonbridge and Malling) has a hardness of 233 mg/L CaCO3, which is classified as hard. Hard water can cause limescale buildup. A water softener or filter jug may help.
Should I use a water filter in ME6?
With 1 contaminant above recommended levels in ME6, a water filter could help. A filter jug or under-sink filter can reduce most common contaminants. See our filter recommendations for your area.
Are there PFAS forever chemicals in ME6 water?
No PFAS (forever chemicals) result is attached to the tap-water tests for ME6, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.
How clean is the river near ME6?
The Environment Agency rated the Leybourne Stream as poor for ecological health in its 2025 assessment, meaning the river is badly affected, with much of the expected wildlife missing. It is held back by fish and water plants and algae. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in ME6, which is treated before it reaches homes.
Keep reading
- Best Water Softener UKHarvey, Kinetico, BWT, Monarch and Water2Buy compared, with real costs
- Do I Need a Water Softener?The hardness bands, the symptoms, and a postcode check
- UK Water Hardness MapIs your water hard or soft, and does it matter?
- Best Water Filters UKEvery filter type compared on what it actually removes
- Do I need a water softener?The hardness bands, the symptoms, and when the answer is no
- Best water softener UKHarvey, Kinetico, BWT, Monarch and Water2Buy compared
- Water softener costUnit, fitting and salt, and how long the payback takes
- Installation explainedWhere it goes, the bypass tap, the drain, DIY or plumber
- Harvey vs KineticoThe two premium twin-cylinder brands, side by side
- Softener salt guideTablet, block or granular, and how much you get through
- Salt-free softenersConditioners and electronic descalers, honestly assessed
- Hard water and new boilersThe 200 ppm rule in the building regulations, with a postcode check
Boiling water taps and hard waterHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map