Tap water in MK5, Milton KeynesSafe to drink.Very hard.
Supplied by Anglian Water. 935 samples, 19 substances, latest on 28 December 2024. Everything is inside the legal limit, and nothing comes close to it.
9.2 / 10
The tank is as full as the score. The specks are the minerals that make water hard.
What to do about it
Hard water: compare softener quotes
At 274 mg/L a softener is the only thing that stops limescale. Filters do not soften water.
It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.
ZeroWater 12-Cup Ready-Pour
£40typical price
Households concerned about PFAS and heavy metals
Waterdrop 10UA Under Sink
£70typical price
High-volume under-sink filtration without RO complexity
We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money
What's in a glass of MK5 water
Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.
Nitrate came closest to a limit, at 37% of it. 15 of 16 substances used under a quarter of theirs.
- Nitrate37%
- Trihalomethanes22%
- Nitrite20%
- Fluoride18%
- Nickel11%
- Iron11%
- Aluminium6%
- Manganese6%
- Turbidity5%
- Antimony5%
- Arsenic3%
- Selenium2%
- Lead2%
- Chromium2%
- Copper2%
- Cadmium<1%
- E. coli none found
- Conductivity 568 µS/cm
- Coliform Bacteria none found
All 19 results as a table
| Substance | Result | Legal limit | Share of limit |
|---|---|---|---|
| Aluminium | 0.012 mg/L | 0.2 mg/L | 6% |
| E. coli | 0 count/100ml | Must be zero | None found |
| Conductivity | 568 µS/cm | No legal limit | – |
| Turbidity | 0.21 NTU | 4 NTU | 5% |
| Nitrate | 18.5 mg/L | 50 mg/L | 37% |
| Nitrite | 0.1 mg/L | 0.5 mg/L | 20% |
| Iron | 0.021 mg/L | 0.2 mg/L | 11% |
| Manganese | 0.003 mg/L | 0.05 mg/L | 6% |
| Copper | 0.03 mg/L | 2 mg/L | 2% |
| Fluoride | 0.27 mg/L | 1.5 mg/L | 18% |
| Arsenic | 0.0003 mg/L | 0.01 mg/L | 3% |
| Cadmium | 0.00002 mg/L | 0.005 mg/L | <1% |
| Chromium | 0.00076 mg/L | 0.05 mg/L | 2% |
| Nickel | 0.0022 mg/L | 0.02 mg/L | 11% |
| Lead | 0.00016 mg/L | 0.01 mg/L | 2% |
| Antimony | 0.00026 mg/L | 0.005 mg/L | 5% |
| Selenium | 0.00072 mg/L | 0.04 mg/L | 2% |
| Coliform Bacteria | 0 count/100ml | Must be zero | None found |
| Trihalomethanes | 0.0219 mg/L | 0.1 mg/L | 22% |
274mg of limescale minerals in every litre
This is the water that furs up kettles
Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.
Softener quotes for MK5
Leave your details and we will email you when we can match you with installers who cover MK5. No obligation.
Request a free assessment and we'll come back to you with local installer options for your area.
100%
free, no obligation
shared only with your consent
Your river is the Loughton Brook, rated moderate
The Environment Agency rated the Loughton Brook as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by insects and other small river life. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.
None of this is a test of your tap water. Environment Agency record · River health across England
MK5 in short
Tap water in MK5 (Milton Keynes) is supplied by Anglian Water in the Milton Keynes Central zone and scores 9.2 out of 10, against an England and Wales average of 9.0. None of the 19 tested substances came close to a limit. The latest sample is from 28 December 2024.
- Very hard water at 274 mg/LThe threshold for very hard is 250 mg/L. Expect visible limescale on taps and in kettles in MK5. How hardness is measured
- 13th cleanest of 18 areas tested in Milton Keynes5 areas in Milton Keynes scored lower. The best is MK11 on 9.3.
- Nothing tested came within 40% of its legal limitThe highest was Nitrate at 37% of the 50 mg/L maximum. See every reading
Questions about MK5 water
Is MK5 tap water safe to drink?
Based on the latest tests, MK5 (Milton Keynes) water scores 9.2/10, which is safe. 0 of 19 tested contaminants exceeded recommended levels. Water is supplied by Anglian Water.
What contaminants are in MK5 water?
We tested 19 contaminants in MK5 water. None exceeded recommended safe levels.
Who supplies water in MK5?
MK5 (Milton Keynes) is supplied by Anglian Water. You can view their full profile and compliance data on our supplier page.
Is MK5 water hard or soft?
Water in MK5 (Milton Keynes) has a hardness of 274 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.
Should I use a water filter in MK5?
MK5 water scored 9.2/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.
Are there PFAS forever chemicals in MK5 water?
No PFAS (forever chemicals) result is attached to the tap-water tests for MK5, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.
How clean is the river near MK5?
The Environment Agency rated the Loughton Brook as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by insects and other small river life. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in MK5, which is treated before it reaches homes.
Keep reading
- Best Water Softener UKHarvey, Kinetico, BWT, Monarch and Water2Buy compared, with real costs
- Do I Need a Water Softener?The hardness bands, the symptoms, and a postcode check
- UK Water Hardness MapIs your water hard or soft, and does it matter?
- Is UK Tap Water Safe?Everything you need to know about tap water safety in the UK
- Do I need a water softener?The hardness bands, the symptoms, and when the answer is no
- Best water softener UKHarvey, Kinetico, BWT, Monarch and Water2Buy compared
- Water softener costUnit, fitting and salt, and how long the payback takes
- Installation explainedWhere it goes, the bypass tap, the drain, DIY or plumber
- Harvey vs KineticoThe two premium twin-cylinder brands, side by side
- Softener salt guideTablet, block or granular, and how much you get through
- Salt-free softenersConditioners and electronic descalers, honestly assessed
How to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map
River and groundwater readings near MK5
Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.
| Substance | Reading | Drinking water limit |
|---|---|---|
| pH | 7.95 pH | None |
| Temperature | 17.9 °C | None |
| Conductivity | 1677 µS/cm | None |
| Phosphate | 0.22 mg/L | None |
| Dissolved Oxygen | 5.71 mg/L | None |
| Ammonia | 0.076 mg/L | 0.5 mg/L |
| Nitrate | 1.3 mg/L | 50 mg/L |
| Nitrite | 0.051 mg/L | 0.5 mg/L |
| Hardness (as CaCO3) | 492 mg/L | None |
| Lead | 0.00001 mg/L | 0.01 mg/L |
| Zinc | 0.00309 mg/L | None |
| Nickel | 0.00145 mg/L | 0.02 mg/L |
| Copper | 0.00007 mg/L | 2 mg/L |
Get alerts for your area
We'll email you when water quality data changes for MK5.