Skip to main content
tapwater
England and Wales average 9.2

Tap water in NR30, Great YarmouthSafe to drink.Very hard.

Supplied by Essex & Suffolk Water. 2,795 samples, 21 substances, latest on 18 December 2025. Everything is inside the legal limit, and nothing comes close to it.

9.0 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 328 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 10-Cup Jug

ZeroWater 10-Cup Jug

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if NR30’s water changes

We check for supply incidents every fifteen minutes. If one affects NR30, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for NR30

What's in a glass of NR30 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrate came closest to a limit, at 58% of it. 18 of 19 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitCopper: 0.0069 mg/L, <1% of the 2 mg/L limitCopper<1%Cadmium: 0.000018 mg/L, <1% of the 0.005 mg/L limitCadmium<1%Manganese: 0.00028 mg/L, <1% of the 0.05 mg/L limitManganese<1%Chromium: 0.0007 mg/L, 1% of the 0.05 mg/L limitChromium1%Selenium: 0.00083 mg/L, 2% of the 0.04 mg/L limitSelenium2%Mercury: 0.000022 mg/L, 2% of the 0.001 mg/L limitMercury2%Iron: 0.0052 mg/L, 3% of the 0.2 mg/L limitIron3%Boron: 0.028 mg/L, 3% of the 1 mg/L limitBoron3%Antimony: 0.00016 mg/L, 3% of the 0.005 mg/L limitAntimony3%Arsenic: 0.00037 mg/L, 4% of the 0.01 mg/L limitArsenic4%Bromate: 0.0005 mg/L, 5% of the 0.01 mg/L limitBromate5%Aluminium: 0.012 mg/L, 6% of the 0.2 mg/L limitAluminium6%Turbidity: 0.29 NTU, 7% of the 4 NTU limitTurbidity7%Nickel: 0.0017 mg/L, 9% of the 0.02 mg/L limitNickel9%Fluoride: 0.14 mg/L, 9% of the 1.5 mg/L limitFluoride9%Nitrite: 0.087 mg/L, 17% of the 0.5 mg/L limitNitrite17%Colour: 3.9 mg/L Pt/Co, 20% of the 20 mg/L Pt/Co limitColour20%Lead: 0.0024 mg/L, 24% of the 0.01 mg/L limitLead24%Nitrate: 29 mg/L, 58% of the 50 mg/L limitNitrate58%
  1. Nitrate58%
  2. Lead24%
  3. Colour20%
  4. Nitrite17%
  5. Fluoride9%
  6. Nickel9%
  7. Turbidity7%
  8. Aluminium6%
  9. Bromate5%
  10. Arsenic4%
  11. Antimony3%
  12. Boron3%
  13. Iron3%
  14. Mercury2%
  15. Selenium2%
  16. Chromium1%
  17. Manganese<1%
  18. Cadmium<1%
  19. Copper<1%
  • Conductivity 740 µS/cm
  • pH 7.6 pH
All 21 results as a table
SubstanceResultLegal limitShare of limit
Nitrite0.087 mg/L0.5 mg/L
17%
Iron0.0052 mg/L0.2 mg/L
3%
Conductivity740 µS/cmNo legal limit–
Nitrate29 mg/L50 mg/L
58%
Aluminium0.012 mg/L0.2 mg/L
6%
Turbidity0.29 NTU4 NTU
7%
pH7.6 pHNo legal limit–
Manganese0.00028 mg/L0.05 mg/L
<1%
Colour3.9 mg/L Pt/Co20 mg/L Pt/Co
20%
Arsenic0.00037 mg/L0.01 mg/L
4%
Cadmium0.000018 mg/L0.005 mg/L
<1%
Copper0.0069 mg/L2 mg/L
<1%
Chromium0.0007 mg/L0.05 mg/L
1%
Bromate0.0005 mg/L0.01 mg/L
5%
Fluoride0.14 mg/L1.5 mg/L
9%
Antimony0.00016 mg/L0.005 mg/L
3%
Boron0.028 mg/L1 mg/L
3%
Mercury0.000022 mg/L0.001 mg/L
2%
Lead0.0024 mg/L0.01 mg/L
24%
Selenium0.00083 mg/L0.04 mg/L
2%
Nickel0.0017 mg/L0.02 mg/L
9%

328mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Over 200 mg/L, the building regulations guidance for England counts this as a hard water area: a new combination boiler or water heater should have limescale protection. The 200 ppm rule

Softener quotes for NR30

Leave your details and we will email you when we can match you with installers who cover NR30. No obligation.

A fitted softener typically costs £1,195 to £2,900. Prices by brand, with sources. Request a free assessment and we'll come back to you with local installer options for your area.

NR30— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your estuary is the Bure & Waveney & Yare & Lothing, rated moderate

The Environment Agency rated the Bure & Waveney & Yare & Lothing as moderate for ecological health in its 2025 assessment, meaning the estuary is noticeably changed by pollution or engineering. It is held back by seagrass and saltmarsh, insects and other small river life and nitrogen. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

NR30 in short

Tap water in NR30 (Great Yarmouth) is supplied by Essex & Suffolk Water and scores 9.0 out of 10, against an England and Wales average of 9.2. None of the 21 tested substances came close to a limit. The latest sample is from 18 December 2025.

  • Among the hardest water in the country at 328 mg/LVery hard starts at 250 mg/L. At this level kettles scale up within weeks and a softener is a normal purchase in NR30. How hardness is measured
  • Nitrate is the reading closest to its limit, at 58% of the 50 mg/L maximumIt passed with room to spare, and everything else tested sat further below its limit. See every reading
  • 2nd cleanest of 3 areas tested in Great YarmouthSquarely mid-table for Great Yarmouth, between NR31 on 9.2 and NR29 on 8.3.

Questions about NR30 water

Is NR30 tap water safe to drink?

Based on the latest tests, NR30 (Great Yarmouth) water scores 9/10, which is safe. 0 of 21 tested contaminants exceeded recommended levels. Water is supplied by Essex & Suffolk Water.

What contaminants are in NR30 water?

We tested 21 contaminants in NR30 water. None exceeded recommended safe levels.

Who supplies water in NR30?

NR30 (Great Yarmouth) is supplied by Essex & Suffolk Water. You can view their full profile and compliance data on our supplier page.

Is NR30 water hard or soft?

Water in NR30 (Great Yarmouth) has a hardness of 328 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in NR30?

NR30 water scored 9/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in NR30 water?

No PFAS (forever chemicals) result is attached to the tap-water tests for NR30, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.

How clean is the estuary near NR30?

The Environment Agency rated the Bure & Waveney & Yare & Lothing as moderate for ecological health in its 2025 assessment, meaning the estuary is noticeably changed by pollution or engineering. It is held back by seagrass and saltmarsh, insects and other small river life and nitrogen. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the estuary, not of tap water in NR30, which is treated before it reaches homes.

Keep reading

Boiling water taps and hard waterHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near NR30

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
Ammonia0.45 mg/L0.5 mg/L
pH7.48 pHNone
Temperature8.8 °CNone
Conductivity711 µS/cmNone
Phosphate0.19 mg/LNone
Nitrite0.029 mg/L0.5 mg/L
Dissolved Oxygen3.91 mg/LNone
Nitrate0.29 mg/L50 mg/L
Lead0.000055 mg/L0.01 mg/L
Nickel0.000959 mg/L0.02 mg/L

Source: Essex & Suffolk Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from