Skip to main content
tapwater
England and Wales average 9.2

Tap water in PE28, HuntingdonshireSafe to drink.Very hard.

Supplied by Anglian Water. 931 samples, 19 substances, latest on 16 December 2024. Everything is inside the legal limit, and nothing comes close to it.

9.3 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 288 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 10-Cup Jug

ZeroWater 10-Cup Jug

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if PE28’s water changes

We check for supply incidents every fifteen minutes. If one affects PE28, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for PE28

What's in a glass of PE28 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrate came closest to a limit, at 35% of it. 15 of 16 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitCadmium: 0.00002 mg/L, <1% of the 0.005 mg/L limitCadmium<1%Copper: 0.03 mg/L, 2% of the 2 mg/L limitCopper2%Chromium: 0.00076 mg/L, 2% of the 0.05 mg/L limitChromium2%Lead: 0.00016 mg/L, 2% of the 0.01 mg/L limitLead2%Selenium: 0.00072 mg/L, 2% of the 0.04 mg/L limitSelenium2%Arsenic: 0.00031 mg/L, 3% of the 0.01 mg/L limitArsenic3%Turbidity: 0.21 NTU, 5% of the 4 NTU limitTurbidity5%Nitrite: 0.03 mg/L, 6% of the 0.5 mg/L limitNitrite6%Aluminium: 0.012 mg/L, 6% of the 0.2 mg/L limitAluminium6%Manganese: 0.003 mg/L, 6% of the 0.05 mg/L limitManganese6%Antimony: 0.00035 mg/L, 7% of the 0.005 mg/L limitAntimony7%Iron: 0.021 mg/L, 11% of the 0.2 mg/L limitIron11%Nickel: 0.00254 mg/L, 13% of the 0.02 mg/L limitNickel13%Fluoride: 0.25 mg/L, 17% of the 1.5 mg/L limitFluoride17%Trihalomethanes: 0.0209 mg/L, 21% of the 0.1 mg/L limitTrihalomethanes21%Nitrate: 17.4 mg/L, 35% of the 50 mg/L limitNitrate35%
  1. Nitrate35%
  2. Trihalomethanes21%
  3. Fluoride17%
  4. Nickel13%
  5. Iron11%
  6. Antimony7%
  7. Nitrite6%
  8. Aluminium6%
  9. Manganese6%
  10. Turbidity5%
  11. Arsenic3%
  12. Selenium2%
  13. Lead2%
  14. Chromium2%
  15. Copper2%
  16. Cadmium<1%
  • Coliform Bacteria none found
  • E. coli none found
  • Conductivity 556 µS/cm
All 19 results as a table
SubstanceResultLegal limitShare of limit
Turbidity0.21 NTU4 NTU
5%
Nitrate17.4 mg/L50 mg/L
35%
Nitrite0.03 mg/L0.5 mg/L
6%
Aluminium0.012 mg/L0.2 mg/L
6%
Iron0.021 mg/L0.2 mg/L
11%
Manganese0.003 mg/L0.05 mg/L
6%
Coliform Bacteria0 count/100mlMust be zeroNone found
E. coli0 count/100mlMust be zeroNone found
Conductivity556 µS/cmNo legal limit–
Copper0.03 mg/L2 mg/L
2%
Fluoride0.25 mg/L1.5 mg/L
17%
Arsenic0.00031 mg/L0.01 mg/L
3%
Cadmium0.00002 mg/L0.005 mg/L
<1%
Chromium0.00076 mg/L0.05 mg/L
2%
Nickel0.00254 mg/L0.02 mg/L
13%
Lead0.00016 mg/L0.01 mg/L
2%
Antimony0.00035 mg/L0.005 mg/L
7%
Selenium0.00072 mg/L0.04 mg/L
2%
Trihalomethanes0.0209 mg/L0.1 mg/L
21%

288mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Over 200 mg/L, the building regulations guidance for England counts this as a hard water area: a new combination boiler or water heater should have limescale protection. The 200 ppm rule

Softener quotes for PE28

Leave your details and we will email you when we can match you with installers who cover PE28. No obligation.

A fitted softener typically costs £1,195 to £2,900. Prices by brand, with sources. Request a free assessment and we'll come back to you with local installer options for your area.

PE28— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Bury Brook, rated moderate

The Environment Agency rated the Bury Brook as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by dissolved oxygen, phosphate and insects and other small river life. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

PE28 in short

Tap water in PE28 (Huntingdonshire) is supplied by Anglian Water (about 71% of postcodes; Cambridge Water supplies the rest) and scores 9.3 out of 10, against an England and Wales average of 9.2. None of the 19 tested substances came close to a limit. The latest sample is from 16 December 2024.

  • The cleanest tap water of the 6 areas tested in HuntingdonshirePE28 scores 9.3 out of 10, ahead of PE7 in second place on 9.3.
  • Very hard water at 288 mg/LThe threshold for very hard is 250 mg/L. Expect visible limescale on taps and in kettles in PE28. How hardness is measured
  • Nothing tested came within 40% of its legal limitThe highest was Nitrate at 35% of the 50 mg/L maximum. See every reading

Questions about PE28 water

Is PE28 tap water safe to drink?

Based on the latest tests, PE28 (Huntingdonshire) water scores 9.3/10, which is safe. 0 of 19 tested contaminants exceeded recommended levels. Water is supplied by Anglian Water.

What contaminants are in PE28 water?

We tested 19 contaminants in PE28 water. None exceeded recommended safe levels.

Who supplies water in PE28?

PE28 (Huntingdonshire) is supplied by Anglian Water. You can view their full profile and compliance data on our supplier page.

Is PE28 water hard or soft?

Water in PE28 (Huntingdonshire) has a hardness of 288 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in PE28?

PE28 water scored 9.3/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in PE28 water?

No PFAS (forever chemicals) result is attached to the tap-water tests for PE28, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.

How clean is the river near PE28?

The Environment Agency rated the Bury Brook as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by dissolved oxygen, phosphate and insects and other small river life. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in PE28, which is treated before it reaches homes.

Keep reading

Boiling water taps and hard waterHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near PE28

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
Ammonia0.51 mg/L0.5 mg/L
Nitrite0.39 mg/L0.5 mg/L
Iron0.26 mg/L0.2 mg/L
Turbidity3.8 NTU4 NTU
pH6.91 pHNone
Temperature8.5 °CNone
Conductivity1256 µS/cmNone
Nitrate29 mg/L50 mg/L
Phosphate0.17 mg/LNone
Dissolved Oxygen2.87 mg/LNone
Lead0.00001 mg/L0.01 mg/L
Hardness (as CaCO3)326 mg/LNone
Zinc0.0024 mg/LNone

Source: Anglian Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from