Skip to main content
tapwater
England and Wales average 9.0

Tap water in PE30, King's Lynn and West NorfolkSafe to drink.Very hard.

Supplied by Anglian Water. 1,054 samples, 18 substances, latest on 13 December 2024. Everything is inside the legal limit, and nothing comes close to it.

9.3 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 307 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 12-Cup Ready-Pour

ZeroWater 12-Cup Ready-Pour

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

What's in a glass of PE30 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrate came closest to a limit, at 62% of it. 15 of 16 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitCadmium: 0.00002 mg/L, <1% of the 0.005 mg/L limitCadmium<1%Copper: 0.03 mg/L, 2% of the 2 mg/L limitCopper2%Chromium: 0.00076 mg/L, 2% of the 0.05 mg/L limitChromium2%Lead: 0.00016 mg/L, 2% of the 0.01 mg/L limitLead2%Antimony: 0.00008 mg/L, 2% of the 0.005 mg/L limitAntimony2%Selenium: 0.00072 mg/L, 2% of the 0.04 mg/L limitSelenium2%Arsenic: 0.0003 mg/L, 3% of the 0.01 mg/L limitArsenic3%Turbidity: 0.21 NTU, 5% of the 4 NTU limitTurbidity5%Aluminium: 0.012 mg/L, 6% of the 0.2 mg/L limitAluminium6%Manganese: 0.003 mg/L, 6% of the 0.05 mg/L limitManganese6%Nitrite: 0.03 mg/L, 6% of the 0.5 mg/L limitNitrite6%Fluoride: 0.1 mg/L, 7% of the 1.5 mg/L limitFluoride7%Trihalomethanes: 0.0071 mg/L, 7% of the 0.1 mg/L limitTrihalomethanes7%Nickel: 0.00151 mg/L, 8% of the 0.02 mg/L limitNickel8%Iron: 0.021 mg/L, 11% of the 0.2 mg/L limitIron11%Nitrate: 31.2 mg/L, 62% of the 50 mg/L limitNitrate62%
  1. Nitrate62%
  2. Iron11%
  3. Nickel8%
  4. Trihalomethanes7%
  5. Fluoride7%
  6. Aluminium6%
  7. Manganese6%
  8. Nitrite6%
  9. Turbidity5%
  10. Arsenic3%
  11. Selenium2%
  12. Lead2%
  13. Antimony2%
  14. Chromium2%
  15. Copper2%
  16. Cadmium<1%
  • Coliform Bacteria none found
  • E. coli none found
All 18 results as a table
SubstanceResultLegal limitShare of limit
Coliform Bacteria0 count/100mlMust be zeroNone found
E. coli0 count/100mlMust be zeroNone found
Turbidity0.21 NTU4 NTU
5%
Aluminium0.012 mg/L0.2 mg/L
6%
Iron0.021 mg/L0.2 mg/L
11%
Manganese0.003 mg/L0.05 mg/L
6%
Trihalomethanes0.0071 mg/L0.1 mg/L
7%
Nitrate31.2 mg/L50 mg/L
62%
Nitrite0.03 mg/L0.5 mg/L
6%
Copper0.03 mg/L2 mg/L
2%
Fluoride0.1 mg/L1.5 mg/L
7%
Arsenic0.0003 mg/L0.01 mg/L
3%
Cadmium0.00002 mg/L0.005 mg/L
<1%
Chromium0.00076 mg/L0.05 mg/L
2%
Nickel0.00151 mg/L0.02 mg/L
8%
Lead0.00016 mg/L0.01 mg/L
2%
Antimony0.00008 mg/L0.005 mg/L
2%
Selenium0.00072 mg/L0.04 mg/L
2%

307mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Softener quotes for PE30

Leave your details and we will email you when we can match you with installers who cover PE30. No obligation.

Request a free assessment and we'll come back to you with local installer options for your area.

PE30— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Gaywood River, rated good

The Environment Agency rated the Gaywood River as good for ecological health in its 2025 assessment, meaning the river is only slightly changed from its natural state. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

PE30 in short

Tap water in PE30 (King's Lynn and West Norfolk) is supplied by Anglian Water in the King's Lynn and West Norfolk Central zone and scores 9.3 out of 10, against an England and Wales average of 9.0. None of the 18 tested substances came close to a limit. The latest sample is from 13 December 2024.

  • Among the hardest water in the country at 307 mg/LVery hard starts at 250 mg/L. At this level kettles scale up within weeks and a softener is a normal purchase in PE30. How hardness is measured
  • Nitrate is the reading closest to its limit, at 62% of the 50 mg/L maximumIt passed with room to spare, and everything else tested sat further below its limit. See every reading
  • 4th cleanest of 10 areas tested in King's Lynn and West NorfolkOnly 3 areas in King's Lynn and West Norfolk scored higher. The best is PE35 on 9.4.

Questions about PE30 water

Is PE30 tap water safe to drink?

Based on the latest tests, PE30 (King's Lynn and West Norfolk) water scores 9.3/10, which is safe. 0 of 18 tested contaminants exceeded recommended levels. Water is supplied by Anglian Water.

What contaminants are in PE30 water?

We tested 18 contaminants in PE30 water. None exceeded recommended safe levels.

Who supplies water in PE30?

PE30 (King's Lynn and West Norfolk) is supplied by Anglian Water. You can view their full profile and compliance data on our supplier page.

Is PE30 water hard or soft?

Water in PE30 (King's Lynn and West Norfolk) has a hardness of 307 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in PE30?

PE30 water scored 9.3/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in PE30 water?

No PFAS (forever chemicals) result is attached to the tap-water tests for PE30, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.

How clean is the river near PE30?

The Environment Agency rated the Gaywood River as good for ecological health in its 2025 assessment, meaning the river is only slightly changed from its natural state. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in PE30, which is treated before it reaches homes.

Keep reading

How to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near PE30

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
Iron1 mg/L0.2 mg/L
Aluminium0.2 mg/L0.2 mg/L
Nickel0.022 mg/L0.02 mg/L
pH8.33 pHNone
Temperature15.9 °CNone
Conductivity470 µS/cmNone
Ammonia0.14 mg/L0.5 mg/L
Nitrate1 mg/L50 mg/L
Nitrite0.006 mg/L0.5 mg/L
Phosphate0.081 mg/LNone
Dissolved Oxygen9.24 mg/LNone
Chromium0.00094 mg/L0.05 mg/L
Zinc0.014 mg/LNone

Get alerts for your area

We'll email you when water quality data changes for PE30.

Source: Anglian Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from