Skip to main content
tapwater
England and Wales average 9.0

Tap water in RM3, HaveringNitrite is over the limit.Very hard.

Supplied by Thames Water. 76 samples, 23 substances, latest on 31 December 2025. Nitrite came in above the legal limit. Everything else passed.

8.4 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 272 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

Waterdrop G3P600 Reverse Osmosis

Waterdrop G3P600 Reverse Osmosis

£550typical price

Maximum contaminant removal including PFAS and fluoride

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

What's in a glass of RM3 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrite is over its legal limit, at 124% of it.

0%25%50%75%limitLegal limitCopper: 0.02 mg/L, 1% of the 2 mg/L limitCopper1%Manganese: 0.0006 mg/L, 1% of the 0.05 mg/L limitManganese1%Selenium: 0.0007 mg/L, 2% of the 0.04 mg/L limitSelenium2%Iron: 0.007 mg/L, 3% of the 0.2 mg/L limitIron3%Aluminium: 0.0082 mg/L, 4% of the 0.2 mg/L limitAluminium4%Chromium: 0.0025 mg/L, 5% of the 0.05 mg/L limitChromium5%Boron: 0.07 mg/L, 7% of the 1 mg/L limitBoron7%Mercury: 0.00007 mg/L, 7% of the 0.001 mg/L limitMercury7%Nickel: 0.0014 mg/L, 7% of the 0.02 mg/L limitNickel7%Antimony: 0.0004 mg/L, 8% of the 0.005 mg/L limitAntimony8%Cadmium: 0.0004 mg/L, 8% of the 0.005 mg/L limitCadmium8%Colour: 1.8 mg/L Pt/Co, 9% of the 20 mg/L Pt/Co limitColour9%Arsenic: 0.001 mg/L, 10% of the 0.01 mg/L limitArsenic10%Fluoride: 0.18 mg/L, 12% of the 1.5 mg/L limitFluoride12%Lead: 0.0015 mg/L, 15% of the 0.01 mg/L limitLead15%Trihalomethanes: 0.017 mg/L, 17% of the 0.1 mg/L limitTrihalomethanes17%Bromate: 0.0024 mg/L, 24% of the 0.01 mg/L limitBromate24%Nitrate: 31 mg/L, 62% of the 50 mg/L limitNitrate62%Nitrite: 0.62 mg/L, 124% of the 0.5 mg/L limitNitrite124%
  1. Nitrite124%
  2. Nitrate62%
  3. Bromate24%
  4. Trihalomethanes17%
  5. Lead15%
  6. Fluoride12%
  7. Arsenic10%
  8. Colour9%
  9. Antimony8%
  10. Cadmium8%
  11. Boron7%
  12. Mercury7%
  13. Nickel7%
  14. Chromium5%
  15. Aluminium4%
  16. Iron3%
  17. Selenium2%
  18. Manganese1%
  19. Copper1%
  • Coliform Bacteria none found
  • E. coli none found
  • Conductivity 643 µS/cm
All 23 results as a table
SubstanceResultLegal limitShare of limit
Nitrite0.62 mg/L0.5 mg/L
124%
Coliform Bacteria0 count/100mlMust be zeroNone found
E. coli0 count/100mlMust be zeroNone found
Colour1.8 mg/L Pt/Co20 mg/L Pt/Co
9%
Conductivity643 µS/cmNo legal limit–
Fluoride0.18 mg/L1.5 mg/L
12%
Nitrate31 mg/L50 mg/L
62%
Hardness (as CaCO3)272 mg/LNo legal limit–
Aluminium0.0082 mg/L0.2 mg/L
4%
Antimony0.0004 mg/L0.005 mg/L
8%
Arsenic0.001 mg/L0.01 mg/L
10%
Boron0.07 mg/L1 mg/L
7%
Cadmium0.0004 mg/L0.005 mg/L
8%
Chromium0.0025 mg/L0.05 mg/L
5%
Copper0.02 mg/L2 mg/L
1%
Iron0.007 mg/L0.2 mg/L
3%
Lead0.0015 mg/L0.01 mg/L
15%
Manganese0.0006 mg/L0.05 mg/L
1%
Mercury0.00007 mg/L0.001 mg/L
7%
Nickel0.0014 mg/L0.02 mg/L
7%
Selenium0.0007 mg/L0.04 mg/L
2%
Trihalomethanes0.017 mg/L0.1 mg/L
17%
Bromate0.0024 mg/L0.01 mg/L
24%

272mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Softener quotes for RM3

Leave your details and we will email you when we can match you with installers who cover RM3. No obligation.

Request a free assessment and we'll come back to you with local installer options for your area.

RM3— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Ingrebourne, rated poor

The Environment Agency rated the Ingrebourne as poor for ecological health in its 2025 assessment, meaning the river is badly affected, with much of the expected wildlife missing. It is held back by water plants and algae and phosphate. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. Its ecological rating has dropped since the previous assessment.

None of this is a test of your tap water. Environment Agency record · River health across England

RM3 in short

Tap water in RM3 (Havering) is supplied by Thames Water in the Havering Central zone and scores 8.4 out of 10, against an England and Wales average of 9.0. 1 of 23 tested substances was close to or over a limit. The latest sample is from 31 December 2025.

  • Nitrite was measured at 0.62 mg/L, 24% over the UK limitIt is the only one of 23 tested substances to go over its limit. See the full results
  • Very hard water at 272 mg/LThe threshold for very hard is 250 mg/L. Expect visible limescale on taps and in kettles in RM3. How hardness is measured
  • 6th cleanest of 9 areas tested in HaveringSquarely mid-table for Havering, between RM5 on 8.5 and RM13 on 7.7.

Questions about RM3 water

Is RM3 tap water safe to drink?

Based on the latest tests, RM3 (Havering) water scores 8.4/10, which is safe. 1 of 23 tested contaminants exceeded recommended levels. Water is supplied by Thames Water.

What contaminants are in RM3 water?

We tested 23 contaminants in RM3 water. 1 were flagged, including Nitrite.

Who supplies water in RM3?

RM3 (Havering) is supplied by Thames Water. You can view their full profile and compliance data on our supplier page.

Is RM3 water hard or soft?

Water in RM3 (Havering) has a hardness of 272 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in RM3?

With 1 contaminant above recommended levels in RM3, a water filter could help. A filter jug or under-sink filter can reduce most common contaminants. See our filter recommendations for your area.

Are there PFAS forever chemicals in RM3 water?

No PFAS (forever chemicals) result is attached to the tap-water tests for RM3, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.

How clean is the river near RM3?

The Environment Agency rated the Ingrebourne as poor for ecological health in its 2025 assessment, meaning the river is badly affected, with much of the expected wildlife missing. It is held back by water plants and algae and phosphate. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. Its ecological rating has dropped since the previous assessment. This is a rating of the river, not of tap water in RM3, which is treated before it reaches homes.

Keep reading

Nitrate levelsHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near RM3

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
pH7.18 pHNone
Temperature19.7 °CNone
Conductivity1022 µS/cmNone
Ammonia0.082 mg/L0.5 mg/L
Nitrate26 mg/L50 mg/L
Nitrite0.042 mg/L0.5 mg/L
Phosphate0.32 mg/LNone
Dissolved Oxygen8.33 mg/LNone
Lead0.0002 mg/L0.01 mg/L
Zinc0.0025 mg/LNone
Nickel0.0038 mg/L0.02 mg/L
Copper0.00009 mg/L2 mg/L
Manganese0.0086 mg/L0.05 mg/L
PFAS (total)0.0083 µg/LNone

Get alerts for your area

We'll email you when water quality data changes for RM3.

Source: Thames Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from