Skip to main content
tapwater
England and Wales average 9.2

Tap water in SM3, SuttonSafe to drink.Hard.

Supplied by SES Water. 2,060 samples, 17 substances, latest on 10 December 2024. Everything is inside the legal limit. One result, nitrate, sits close to the line.

8.7 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 205 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

Waterdrop G3P600 Reverse Osmosis

Waterdrop G3P600 Reverse Osmosis

£550typical price

Removes nitrate, the result that stood out in SM3.

Osmio PRO-III Ultimate Whole House

£499typical price

Removes nitrate, the result that stood out in SM3.

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if SM3’s water changes

We check for supply incidents every fifteen minutes. If one affects SM3, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for SM3

What's in a glass of SM3 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrate came closest to a limit, at 77% of it. 15 of 17 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitCadmium: 0.00006 mg/L, 1% of the 0.005 mg/L limitCadmium1%Chromium: 0.0008 mg/L, 2% of the 0.05 mg/L limitChromium2%Trihalomethanes: 0.0017 mg/L, 2% of the 0.1 mg/L limitTrihalomethanes2%Manganese: 0.0009 mg/L, 2% of the 0.05 mg/L limitManganese2%Antimony: 0.00012 mg/L, 2% of the 0.005 mg/L limitAntimony2%Arsenic: 0.00024 mg/L, 2% of the 0.01 mg/L limitArsenic2%Aluminium: 0.005 mg/L, 3% of the 0.2 mg/L limitAluminium3%Copper: 0.057 mg/L, 3% of the 2 mg/L limitCopper3%Selenium: 0.00116 mg/L, 3% of the 0.04 mg/L limitSelenium3%Iron: 0.006 mg/L, 3% of the 0.2 mg/L limitIron3%Turbidity: 0.17 NTU, 4% of the 4 NTU limitTurbidity4%Colour: 1.1 mg/L Pt/Co, 6% of the 20 mg/L Pt/Co limitColour6%Boron: 0.057 mg/L, 6% of the 1 mg/L limitBoron6%Nickel: 0.0022 mg/L, 11% of the 0.02 mg/L limitNickel11%Nitrite: 0.058 mg/L, 12% of the 0.5 mg/L limitNitrite12%Lead: 0.0048 mg/L, 48% of the 0.01 mg/L limitLead48%Nitrate: 38.3 mg/L, 77% of the 50 mg/L limitNitrate77%
  1. Nitrate77%
  2. Lead48%
  3. Nitrite12%
  4. Nickel11%
  5. Boron6%
  6. Colour6%
  7. Turbidity4%
  8. Iron3%
  9. Selenium3%
  10. Copper3%
  11. Aluminium3%
  12. Antimony2%
  13. Arsenic2%
  14. Manganese2%
  15. Trihalomethanes2%
  16. Chromium2%
  17. Cadmium1%
All 17 results as a table
SubstanceResultLegal limitShare of limit
Nitrate38.3 mg/L50 mg/L
77%
Turbidity0.17 NTU4 NTU
4%
Colour1.1 mg/L Pt/Co20 mg/L Pt/Co
6%
Nitrite0.058 mg/L0.5 mg/L
12%
Selenium0.00116 mg/L0.04 mg/L
3%
Antimony0.00012 mg/L0.005 mg/L
2%
Lead0.0048 mg/L0.01 mg/L
48%
Nickel0.0022 mg/L0.02 mg/L
11%
Chromium0.0008 mg/L0.05 mg/L
2%
Cadmium0.00006 mg/L0.005 mg/L
1%
Arsenic0.00024 mg/L0.01 mg/L
2%
Copper0.057 mg/L2 mg/L
3%
Manganese0.0009 mg/L0.05 mg/L
2%
Iron0.006 mg/L0.2 mg/L
3%
Aluminium0.005 mg/L0.2 mg/L
3%
Boron0.057 mg/L1 mg/L
6%
Trihalomethanes0.0017 mg/L0.1 mg/L
2%

205mg of limescale minerals in every litre

This is the water that furs up kettles

Hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Over 200 mg/L, the building regulations guidance for England counts this as a hard water area: a new combination boiler or water heater should have limescale protection. The 200 ppm rule

Softener quotes for SM3

Leave your details and we will email you when we can match you with installers who cover SM3. No obligation.

A fitted softener typically costs £1,195 to £2,900. Prices by brand, with sources. Request a free assessment and we'll come back to you with local installer options for your area.

SM3— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Beverley Brook (Motspur Park to Thames) and Pyl Brook at West Barnes, rated moderate

The Environment Agency rated the Beverley Brook (Motspur Park to Thames) and Pyl Brook at West Barnes as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by fish, phosphate and insects and other small river life. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

Within 10 km

321

forever-chemical detections in nearby rivers and groundwater

At 1 site. The highest was PFPeA at 0.018 µg/L, at Wandle at the Causeway, Wandsworth, 9.9 km away, in September 2024. These are river and borehole samples, not tests of your tap water.

Every PFAS sample around London · Which filters remove PFAS · PFAS explained

SM3 in short

Tap water in SM3 (Sutton) is supplied by SES Water and scores 8.7 out of 10, against an England and Wales average of 9.2. 1 of 17 tested substances was close to or over a limit. The latest sample is from 10 December 2024.

  • Nitrate is within its legal limit but flagged, at 77% of the 50 mg/L maximumAnything over three quarters of a limit is flagged here as worth watching. It has not gone over. See every reading
  • 5th cleanest of 6 areas tested in Sutton1 area in Sutton scored lower. The best is SM1 on 9.3.
  • Hard water at 205 mg/LHard starts at 180 mg/L, the point where a softener begins to pay for itself. Limescale will build up in SM3. How hardness is measured

Questions about SM3 water

Is SM3 tap water safe to drink?

Based on the latest tests, SM3 (Sutton) water scores 8.7/10, which is safe. 1 of 17 tested contaminants exceeded recommended levels. Water is supplied by SES Water.

What contaminants are in SM3 water?

We tested 17 contaminants in SM3 water. 1 were flagged, including Nitrate. PFAS (forever chemicals) were also measured in rivers and groundwater within 10 km, though not in the tap-water tests themselves.

Who supplies water in SM3?

SM3 (Sutton) is supplied by SES Water. You can view their full profile and compliance data on our supplier page.

Is SM3 water hard or soft?

Water in SM3 (Sutton) has a hardness of 205 mg/L CaCO3, which is classified as hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in SM3?

With 1 contaminant above recommended levels in SM3, a water filter could help. A reverse osmosis or activated carbon filter is recommended for PFAS removal. See our filter recommendations for your area.

Are there PFAS forever chemicals in SM3 water?

The tap-water tests we hold for SM3 do not include a PFAS result. Environment Agency monitoring found PFAS in 321 river and groundwater samples from 1 sites within 10 km of SM3, the highest being PFPeA at 0.018 µg/L about 9.9 km away. These are environmental samples, not tests of tap water. The UK currently has no legal limit for PFAS in drinking water; the Drinking Water Inspectorate uses a 0.1 µg/L guideline for individual compounds. Reverse osmosis filters can reduce PFAS levels.

How clean is the river near SM3?

The Environment Agency rated the Beverley Brook (Motspur Park to Thames) and Pyl Brook at West Barnes as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by fish, phosphate and insects and other small river life. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in SM3, which is treated before it reaches homes.

Keep reading

PFAS explainedNitrate levelsBoiling water taps and hard waterHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near SM3

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
pH8.38 pHNone
Temperature15.3 °CNone
Conductivity665 µS/cmNone
Nitrate5.1 mg/L50 mg/L
Nitrite0.015 mg/L0.5 mg/L
Phosphate0.08 mg/LNone
Dissolved Oxygen9.8 mg/LNone
Ammonia0.045 mg/L0.5 mg/L
Lead0.00031 mg/L0.01 mg/L
Nickel0.0023 mg/L0.02 mg/L
Cadmium0.000012 mg/L0.005 mg/L
Hardness (as CaCO3)503 mg/LNone
Zinc0.018 mg/LNone
Copper0.00006 mg/L2 mg/L
Chromium0.00016 mg/L0.05 mg/L

Source: SES Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from