Tap water in SM6, SuttonNickel is over the limit.Hard.
Supplied by SES Water. 2,822 samples, 17 substances, latest on 18 December 2024. Nickel came in above the legal limit. Everything else passed.
8.6 / 10
The tank is as full as the score. The specks are the minerals that make water hard.
What to do about it

Waterdrop G3P600 Reverse Osmosis
£550typical price
Removes nickel, the result that stood out in SM6.
Stop the limescale
At 207 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

BRITA Marella XL + MAXTRA PRO
£25typical price
Basic chlorine and taste improvement on a budget
We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money
Hear about it if SM6’s water changes
We check for supply incidents every fifteen minutes. If one affects SM6, you get an email the same day. You also get five short emails about your water over the first month.
Want this as a document?
Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.
See the full report for SM6What's in a glass of SM6 water
Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.
Nickel is over its legal limit, at 139% of it.
- Nickel139%
- Nitrate60%
- Copper19%
- Turbidity9%
- Iron6%
- Nitrite5%
- Boron4%
- Lead3%
- Aluminium3%
- Selenium2%
- Colour2%
- Manganese2%
- Antimony2%
- Chromium2%
- Arsenic1%
- Cadmium1%
- Trihalomethanes1%
All 17 results as a table
| Substance | Result | Legal limit | Share of limit |
|---|---|---|---|
| Nickel | 0.0279 mg/L | 0.02 mg/L | 139% |
| Turbidity | 0.35 NTU | 4 NTU | 9% |
| Colour | 0.4 mg/L Pt/Co | 20 mg/L Pt/Co | 2% |
| Nitrite | 0.023 mg/L | 0.5 mg/L | 5% |
| Selenium | 0.00082 mg/L | 0.04 mg/L | 2% |
| Nitrate | 29.8 mg/L | 50 mg/L | 60% |
| Antimony | 0.00009 mg/L | 0.005 mg/L | 2% |
| Lead | 0.0003 mg/L | 0.01 mg/L | 3% |
| Chromium | 0.0008 mg/L | 0.05 mg/L | 2% |
| Cadmium | 0.00006 mg/L | 0.005 mg/L | 1% |
| Arsenic | 0.00015 mg/L | 0.01 mg/L | 1% |
| Copper | 0.38 mg/L | 2 mg/L | 19% |
| Manganese | 0.001 mg/L | 0.05 mg/L | 2% |
| Aluminium | 0.005 mg/L | 0.2 mg/L | 3% |
| Trihalomethanes | 0.0012 mg/L | 0.1 mg/L | 1% |
| Iron | 0.012 mg/L | 0.2 mg/L | 6% |
| Boron | 0.042 mg/L | 1 mg/L | 4% |
207mg of limescale minerals in every litre
This is the water that furs up kettles
Hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.
Over 200 mg/L, the building regulations guidance for England counts this as a hard water area: a new combination boiler or water heater should have limescale protection. The 200 ppm rule
Softener quotes for SM6
Leave your details and we will email you when we can match you with installers who cover SM6. No obligation.
A fitted softener typically costs £1,195 to £2,900. Prices by brand, with sources. Request a free assessment and we'll come back to you with local installer options for your area.
100%
free, no obligation
shared only with your consent
Your river is the Wandle (Croydon to Wandsworth) and the Graveney, rated moderate
The Environment Agency rated the Wandle (Croydon to Wandsworth) and the Graveney as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by phosphate and fish. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.
None of this is a test of your tap water. Environment Agency record · River health across England
SM6 in short
Tap water in SM6 (Sutton) is supplied by SES Water and scores 8.6 out of 10, against an England and Wales average of 9.2. 1 of 17 tested substances was close to or over a limit. The latest sample is from 18 December 2024.
- Nickel was measured at 0.028 mg/L, 39% over the UK limitIt is the only one of 17 tested substances to go over its limit. See the full results
- The lowest score of the 6 areas tested in SuttonSM6 scores 8.6 out of 10. The best in Sutton, SM1, scores 9.3.
- Every one of the 9 neighbouring districts scores higherSM5 next door scores 9.3, against 8.6 here. Supply zones, not distance, explain the gap. See SM5
Questions about SM6 water
Is SM6 tap water safe to drink?
Based on the latest tests, SM6 (Sutton) water scores 8.6/10, which is safe. 1 of 17 tested contaminants exceeded recommended levels. Water is supplied by SES Water.
What contaminants are in SM6 water?
We tested 17 contaminants in SM6 water. 1 were flagged, including Nickel.
Who supplies water in SM6?
SM6 (Sutton) is supplied by SES Water. You can view their full profile and compliance data on our supplier page.
Is SM6 water hard or soft?
Water in SM6 (Sutton) has a hardness of 207 mg/L CaCO3, which is classified as hard. Hard water can cause limescale buildup. A water softener or filter jug may help.
Should I use a water filter in SM6?
With 1 contaminant above recommended levels in SM6, a water filter could help. A filter jug or under-sink filter can reduce most common contaminants. See our filter recommendations for your area.
Are there PFAS forever chemicals in SM6 water?
No PFAS (forever chemicals) result is attached to the tap-water tests for SM6, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.
How clean is the river near SM6?
The Environment Agency rated the Wandle (Croydon to Wandsworth) and the Graveney as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by phosphate and fish. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in SM6, which is treated before it reaches homes.
Keep reading
- Best Water Softener UKHarvey, Kinetico, BWT, Monarch and Water2Buy compared, with real costs
- Do I Need a Water Softener?The hardness bands, the symptoms, and a postcode check
- UK Water Hardness MapIs your water hard or soft, and does it matter?
- Best Water Filters UKEvery filter type compared on what it actually removes
- Do I need a water softener?The hardness bands, the symptoms, and when the answer is no
- Best water softener UKHarvey, Kinetico, BWT, Monarch and Water2Buy compared
- Water softener costUnit, fitting and salt, and how long the payback takes
- Installation explainedWhere it goes, the bypass tap, the drain, DIY or plumber
- Harvey vs KineticoThe two premium twin-cylinder brands, side by side
- Softener salt guideTablet, block or granular, and how much you get through
- Salt-free softenersConditioners and electronic descalers, honestly assessed
- Hard water and new boilersThe 200 ppm rule in the building regulations, with a postcode check
Boiling water taps and hard waterHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map
River and groundwater readings near SM6
Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.