Skip to main content
tapwater
England and Wales average 9.0

Tap water in SN11, WiltshireNitrite is over the limit.Very hard.

Supplied by Thames Water. 71 samples, 23 substances, latest on 31 December 2025. Nitrite came in above the legal limit. Everything else passed.

8.5 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 313 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

Waterdrop G3P600 Reverse Osmosis

Waterdrop G3P600 Reverse Osmosis

£550typical price

Maximum contaminant removal including PFAS and fluoride

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

What's in a glass of SN11 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrite is over its legal limit, at 140% of it.

0%25%50%75%limitLegal limitSelenium: 0.0004 mg/L, 1% of the 0.04 mg/L limitSelenium1%Manganese: 0.0006 mg/L, 1% of the 0.05 mg/L limitManganese1%Boron: 0.02 mg/L, 2% of the 1 mg/L limitBoron2%Iron: 0.007 mg/L, 3% of the 0.2 mg/L limitIron3%Nickel: 0.0008 mg/L, 4% of the 0.02 mg/L limitNickel4%Aluminium: 0.0082 mg/L, 4% of the 0.2 mg/L limitAluminium4%Chromium: 0.0025 mg/L, 5% of the 0.05 mg/L limitChromium5%Copper: 0.12 mg/L, 6% of the 2 mg/L limitCopper6%Antimony: 0.0003 mg/L, 6% of the 0.005 mg/L limitAntimony6%Fluoride: 0.1 mg/L, 7% of the 1.5 mg/L limitFluoride7%Mercury: 0.00007 mg/L, 7% of the 0.001 mg/L limitMercury7%Arsenic: 0.0007 mg/L, 7% of the 0.01 mg/L limitArsenic7%Trihalomethanes: 0.007 mg/L, 7% of the 0.1 mg/L limitTrihalomethanes7%Cadmium: 0.0004 mg/L, 8% of the 0.005 mg/L limitCadmium8%Lead: 0.0009 mg/L, 9% of the 0.01 mg/L limitLead9%Colour: 1.8 mg/L Pt/Co, 9% of the 20 mg/L Pt/Co limitColour9%Bromate: 0.001 mg/L, 10% of the 0.01 mg/L limitBromate10%Nitrate: 34.6 mg/L, 69% of the 50 mg/L limitNitrate69%Nitrite: 0.7 mg/L, 140% of the 0.5 mg/L limitNitrite140%
  1. Nitrite140%
  2. Nitrate69%
  3. Bromate10%
  4. Lead9%
  5. Colour9%
  6. Cadmium8%
  7. Mercury7%
  8. Arsenic7%
  9. Trihalomethanes7%
  10. Fluoride7%
  11. Copper6%
  12. Antimony6%
  13. Chromium5%
  14. Aluminium4%
  15. Nickel4%
  16. Iron3%
  17. Boron2%
  18. Manganese1%
  19. Selenium1%
  • Coliform Bacteria none found
  • E. coli none found
  • Conductivity 572 µS/cm
All 23 results as a table
SubstanceResultLegal limitShare of limit
Nitrite0.7 mg/L0.5 mg/L
140%
Coliform Bacteria0 count/100mlMust be zeroNone found
E. coli0 count/100mlMust be zeroNone found
Colour1.8 mg/L Pt/Co20 mg/L Pt/Co
9%
Conductivity572 µS/cmNo legal limit–
Fluoride0.1 mg/L1.5 mg/L
7%
Nitrate34.6 mg/L50 mg/L
69%
Hardness (as CaCO3)313 mg/LNo legal limit–
Aluminium0.0082 mg/L0.2 mg/L
4%
Antimony0.0003 mg/L0.005 mg/L
6%
Arsenic0.0007 mg/L0.01 mg/L
7%
Boron0.02 mg/L1 mg/L
2%
Cadmium0.0004 mg/L0.005 mg/L
8%
Chromium0.0025 mg/L0.05 mg/L
5%
Copper0.12 mg/L2 mg/L
6%
Iron0.007 mg/L0.2 mg/L
3%
Lead0.0009 mg/L0.01 mg/L
9%
Manganese0.0006 mg/L0.05 mg/L
1%
Mercury0.00007 mg/L0.001 mg/L
7%
Nickel0.0008 mg/L0.02 mg/L
4%
Selenium0.0004 mg/L0.04 mg/L
1%
Trihalomethanes0.007 mg/L0.1 mg/L
7%
Bromate0.001 mg/L0.01 mg/L
10%

313mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Softener quotes for SN11

Leave your details and we will email you when we can match you with installers who cover SN11. No obligation.

Request a free assessment and we'll come back to you with local installer options for your area.

SN11— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Abberd Bk - source to conf R Marden, rated moderate

The Environment Agency rated the Abberd Bk - source to conf R Marden as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by insects and other small river life, water plants and algae and phosphate. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

Within 10 km

4

forever-chemical detections in nearby rivers and groundwater

At 1 site. The highest was 6:2 FTSA at 0.0024 µg/L, at Winterbourne Bassett, Cottage Farm Richardson BH :SU07/16, 10.0 km away, in December 2024. These are river and borehole samples, not tests of your tap water.

Every PFAS sample around Swindon · Which filters remove PFAS · PFAS explained

SN11 in short

Tap water in SN11 (Wiltshire) is supplied by Thames Water in the Wiltshire Central zone and scores 8.5 out of 10, against an England and Wales average of 9.0. 1 of 23 tested substances was close to or over a limit. The latest sample is from 31 December 2025.

  • Nitrite was measured at 0.7 mg/L, 40% over the UK limitIt is the only one of 23 tested substances to go over its limit. See the full results
  • Among the hardest water in the country at 313 mg/LVery hard starts at 250 mg/L. At this level kettles scale up within weeks and a softener is a normal purchase in SN11. How hardness is measured
  • 11th cleanest of 19 areas tested in WiltshireSquarely mid-table for Wiltshire, between SN9 on 9.3 and SP9 on 7.7.

Questions about SN11 water

Is SN11 tap water safe to drink?

Based on the latest tests, SN11 (Wiltshire) water scores 8.5/10, which is safe. 1 of 23 tested contaminants exceeded recommended levels. Water is supplied by Thames Water.

What contaminants are in SN11 water?

We tested 23 contaminants in SN11 water. 1 were flagged, including Nitrite. PFAS (forever chemicals) were also measured in rivers and groundwater within 10 km, though not in the tap-water tests themselves.

Who supplies water in SN11?

SN11 (Wiltshire) is supplied by Thames Water. You can view their full profile and compliance data on our supplier page.

Is SN11 water hard or soft?

Water in SN11 (Wiltshire) has a hardness of 313 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in SN11?

With 1 contaminant above recommended levels in SN11, a water filter could help. A reverse osmosis or activated carbon filter is recommended for PFAS removal. See our filter recommendations for your area.

Are there PFAS forever chemicals in SN11 water?

The tap-water tests we hold for SN11 do not include a PFAS result. Environment Agency monitoring found PFAS in 4 river and groundwater samples from 1 sites within 10 km of SN11, the highest being 6:2 FTSA at 0.0024 µg/L about 10 km away. These are environmental samples, not tests of tap water. The UK currently has no legal limit for PFAS in drinking water; the Drinking Water Inspectorate uses a 0.1 µg/L guideline for individual compounds. Reverse osmosis filters can reduce PFAS levels.

How clean is the river near SN11?

The Environment Agency rated the Abberd Bk - source to conf R Marden as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by insects and other small river life, water plants and algae and phosphate. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in SN11, which is treated before it reaches homes.

Keep reading

PFAS explainedNitrate levelsHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near SN11

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
pH8.03 pHNone
Temperature17 °CNone
Conductivity411 µS/cmNone
Ammonia0.041 mg/L0.5 mg/L
Nitrate0.44 mg/L50 mg/L
Nitrite0.0062 mg/L0.5 mg/L
Phosphate0.076 mg/LNone
Dissolved Oxygen7.26 mg/LNone

Get alerts for your area

We'll email you when water quality data changes for SN11.

Source: Thames Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from